Recoil 2 Channel 80W adjustable high-to-low level subwoofer amplifier Line Output Converter (LOC) with a built-in amplifier remote trigger. This device is designed to convert 2 channels of speaker level audio into 2 channels of line level audio that can be used by car audio amplifiers.
This interface detects an audio signal and generates an amplifier turn on signal based on this, the amplifier turn on signal stays on for 60 seconds after the audio signal disappears. This allows the amplifier to stay turned on between tracks and during moments of silent audio.
This LED load resistor eliminates problems such as bulb failure error messages when a LED bulb is installed on a vehicle equipped with a CanBus system.
PLEASE NOTE: To prevent any possible problems caused by heat generation, it is advisable to locate the resistor on a metal surface and away from plastic components or wiring.
Adjustable 2 channel line output converter with built in amplifier remote trigger.
Converts 2 channels of speaker level audio to 2 channels of line level audio.
Plug and play voltage stabiliser on ISO power cable
For use when fitting an aftermarket radio in cars with automatic engine 'Start/Stop' technology.
For cars that have a drop in voltage on both ignition and permanent feeds during the engine cranking during the start/stop cycle causing the radio to turn off.