PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description
Steering wheel control interface and adapter cable for Honda Accord, CR-V, CR-Z, Insight and Jazz cars.
The interface and radio adapter cable is plug and play except for one wire, it is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip, source and phone buttons from the steering wheel with the new radio.
The cable adapts from the 24 pin Honda connector with a locking latch in the car to standard aftermarket ISO connectors. This replaces the needs for a separate ISO radio replacement adapter cable.
The steering wheel control interface is built into the adapter cable for a plug and play installation, One loose wire needs to be connected for the phone functions to work from the steering wheel
The interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume, track skip, source and telephone buttons.
PLEASE NOTE: There is a loose green wire on the adapter cable, this needs to be connected to the wiring at the original Bluetooth module in the car, full fitting instructions are included
An additional patch lead is required for the steering controls depending on the make of radio being fitted.
| Radio Being Fitted | Part Number | Short Description |
| Resistive Programming (Loose Wire) | 29-000 | Loose wire Patch lead for 29-Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos. |
| Alpine | 29-001 | Patch lead for 29-Series Steering wheel control for Alpine stereos. |
| Clarion | 29-003 | Patch lead for 29-Series Steering wheel control for Clarion stereos. |
| JVC (Single Wire) | 29-004SW | Single Wire Patch lead for 29-Series Steering wheel control for JVC stereos. |
| Kenwood | 29-005 | Patch lead for 29-Series Steering wheel control for Kenwood stereos. |
| Pioneer | 29-007 | Patch lead for 29-Series Steering wheel control for Pioneer stereos. |
| Sony | 29-008 | Patch lead for 29-Series Steering wheel control for Sony stereos. |
| Resistive Programming (3.5 Jack) | 29-016 | 3.5mm Jack Patch lead for 29-Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos. |
| Universal | 29-025 | Self-Pinning Patch lead for Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive programming head units with either two wires or a 3.5mm jack. |
Brand: InCarTec
Car models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Acura - TSX (2008 - 2015)
Honda - Accord 8th Gen (2008 - 2015)
Honda - CR-V 3rd Gen (2007 - 2011)
Honda - CR-Z (2010 - 2016)
Honda - Insight 2nd Gen (2010 - 2014)
Honda - Jazz 2nd Gen (2008 - 2014)
Honda - Stepwgn (RK) (2009 - 2015)
