Audi A2, A4, A6 complete Single DIN stereo upgrade fitting kit (STANDARD REAR AMPLIFIED)

Complete fitting kit to install a Single DIN head unit into an Audi A2/A4/A6 car (with rear amplified standard Chorus or Concert radios) 

This head unit fitting kit includes:

Audi ISO and mini ISO adapter harness for rear amplified cars (20-250)

ISO adapter harness for Audi cars with ISO and mini ISO connectors at the rear of the head unit.

The harness has a built in adapter to drop the rear speaker outputs from the new head unit to a low line level signal to work with the original amplifier in the car.

Some cars may have an ignition supply in the original harness, other cars may not and an ignition supply will need to be connected.

ISO to DIN antenna adapter lead with 12v power feed (21-120)

Antenna adapter cable for  cars with ISO connectors that have amplified original antennas. This cable converts the cars existing ISO aerial plug to an aftermarket DIN type used by most car radio manufacturers.

It also provides a power feed to give 12v from the car radio to the cars amplified antenna.

Audi A2, A3, A4(95-01) & A6 Single DIN fascia adapter (50-108)

Car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket version.

Audi Radio release keys (52-013)

Radio release keys for the removal of the original head unit in VW/Audi vehicles.

PLEASE NOTE: This fitting kit is suitable for Audi vehicles that have amplified rear speakers. Not suitable for cars with Symphony or Bose systems.

For earlier Audi A4 cars please use fascia 50-107

For older Alpine head units an additional antenna adapter may be needed, part number 21-101