PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description
Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.
Suitable for Chrysler Voyager and Dodge Ram vehicle models with original amplifiers.
PLEASE NOTE: For vehicles with original amplifiers please use 23-211 in addition to this interface
Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.
This interface has ISO connectors so it can be used with an amplifier turn on interface which will already be connected to the Chrysler 22 pin connector in the car.
Suitable for Chrysler Voyager and Dodge Ram vehicle models with original amplifiers.
For vehicles with original amplifiers please use 23-211 in addition to this interface
PLEASE NOTE
This interface has ISO connectors so it can be used with an amplifier turn on interface which will already be connected to the Chrysler 22 pin connector in the car.
A loose wire needs to be joined to a wire underneath the cars steering cowling. Full instructions are included.
This interface is for vehicles that do not have CANbus wires at the back of the radio (CANbus at the radio was introduced around 2005).
The CANbus wires are white and white/orange in pins 5 and 6 in the 22 pin connector at the back of the radio.
If the CANbus wires are present, a different CAN steering control interface will be required.
PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.
| Radio Being Fitted | Part Number | Short Description |
| Resistive Programming (Loose Wire) | 29-000 | Loose wire Patch lead for 29-Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos. |
| Alpine | 29-001 | Patch lead for 29-Series Steering wheel control for Alpine stereos. |
| Clarion | 29-003 | Patch lead for 29-Series Steering wheel control for Clarion stereos. |
| JVC (Single Wire) | 29-004SW | Single Wire Patch lead for 29-Series Steering wheel control for JVC stereos. |
| Kenwood | 29-005 | Patch lead for 29-Series Steering wheel control for Kenwood stereos. |
| Pioneer | 29-007 | Patch lead for 29-Series Steering wheel control for Pioneer stereos. |
| Sony | 29-008 | Patch lead for 29-Series Steering wheel control for Sony stereos. |
| Resistive Programming (3.5 Jack) | 29-016 | 3.5mm Jack Patch lead for 29-Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos. |
| Universal | 29-025 | Self-Pinning Patch lead for Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive programming head units with either two wires or a 3.5mm jack. |
Brand: InCarTec
Car models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Chrysler - Grand Voyager 4th Gen Facelift (2002 - 2008)
Chrysler - Voyager 4th Gen Facelift* (2002 - 2008)
Dodge - Ram 3 (2002 - 2005)
