Complete stereo upgrade fitting kit for a Renault Clio (2012 - 2019), custom made to fit a HU-PIO-EVO64DAB head unit seamlessly into the dash

Complete fitting kit to install a single DIN head unit into an Audi to replace standard Chorus or Concert radio. 

This kit includes:
-Fascia (50-108)
-Antenna adapter (21-120)
-ISO for active rear speakers (20-250)
-Release keys (52-013)

for earlier Audi A4 use facia 50-107

Complete fitting kit to install a single DIN head unit in an Audi TT 8N with either a fully amplified or half amplifier audio system.
This kit includes:
- Fascia (50-109)
- CAN ignition interface (20-270-IGN)
- Amplified speaker adapter (Part of 20-270-IGN)
- Antenna adapter (21-120)
- Radio Release Keys (52-013)

Complete stereo upgrade fitting kit to install a single or double DIN radio in an Audi A4 B6 with the rear amplified audio systems. CONCERT 

This head unit fitting kit includes:
- Fascia adapter panel (50-112)
- CAN ignition interface for plug and play installation (Part of 20-252A-IGN)
- ISO harness adapter cable (Part of 20-252A-IGN)
- Antenna adapter cable (Part of 20-252A-IGN)

For double din installation the central bar of the fascia needs to be cut out.

Complete fitting kit to install a single DIN head unit and retain the original steering wheel controls in a BMW 3 series E46

PLEASE NOTE: Not for vehicles with original navigation or Harman/Kardon audio systems.

This kit includes:
-Fascia (50-116)
-Antenna adapter (21-129)
-Steering wheel control interface (49-627)
-Universal patch lead (49-025)

FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete fitting kit to change the original radio in a 2001 to 2006 Mini Cooper or Mini One with original Boost CD radio for an aftermarket unit.

Kit includes:
-Fascia (50-117)
-Steering control interface (29-628)
-Patch lead (29-025)
-Antenna adapter (21-106)

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete fitting kit to install a single DIN head unit and retain the original steering wheel controls

This kit includes:
-Fascia (50-118)
-Antenna adapter (21-106)
-Steering wheel control interface (49-BMW-01)
-Universal patch lead (49-025)

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete fitting kit to install a single DIN head unit and retain the original steering wheel controls and parking sensors

This kit includes:
-Fascia (50-118)
-Antenna adapter (21-106)
-Steering wheel control interface (49-BMW-01)
-Universal patch lead (49-025)
-PDC interface (25-514)

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete stereo upgrade fitting kit to install a single or double DIN aftermarket radio in various Volkswagen cars.

This head unit fitting kit includes:
-Fascia adapter panel (50-172)
-Radio replacement adapter cable (20-156A)
-Antenna adapter (Part of 20-156A)

For double din installation the central bar of the fascia needs to be cut out.

Complete stereo upgrade fitting kit to install a single DIN head unit into various 2005 onwards Volkswagen car models.

This kit is suitable for VW car models with a Single Fakra antenna connection on the back of the original radio 

Includes a pre-wired CANbus interface to generate a key present ignition feed.

This kit includes:

-Fascia with removable pocket (50-172)

-Quadlock to ISO cable with built in CANbus interface (20-156A-IGN)

-Fakra Antenna adapter (Part of 20-156A-IGN)

Complete stereo upgrade fitting kit to install a single DIN aftermarket radio in various Volkswagen cars (WITH ORIGINAL RCD210 RADIO HEAD UNITS)

This head unit fitting kit includes:

- Fakra to DIN antenna adapter cable (21-123)

- Radio replacement steering wheel adapter interface (49-VW-01)

- Universal SWC Patch Lead (49-025)

- Fascia adapter panel (50-172)

Complete stereo upgrade fitting kit to install a single or double din aftermarket radio and retain the use of the steering wheel controls and original amplifier in a Volvo V70 2005 - 2007 car.

This head unit fitting kit includes:
-Fascia adapter panel (50-179)
-Steering control interface (39-VOL-02)
-Volvo to ISO radio adapter cables (part of 39-VOL-02)
-Phono amplifier adapter cables (part of 39-VOL-02)
-Volvo to DIN antenna adapter (21-104)

For double din installation the central bar of the fascia needs to be cut out.

Complete fitting kit to change the original radio in Mercedes vehicles for a single or double din after market unit.

Kit includes:
-Fascia (50-180)
-Steering control interface (39-MB-A10)
-Patch lead (Part Of 39-MB-A10)
-Antenna adapter (21-106)

For double din installation the central bar of the fascia needs to be cut out.

Complete fitting kit to install a single or double DIN head unit in to a Ford car  with square radio and Quadlock connector

This kit includes:
-Fascia
-ISO harness
-Antenna adapter

For double din installation the central bar of the fascia needs to be cut out.

Complete fitting kit to install a single or double DIN head unit and retain the original steering wheel controls in Ford cars

This kit includes:
-Fascia
-Antenna adapter
-Steering wheel control interface
-Universal patch lead

PLEASE NOTE: For Double DIN installation the central bar of the fascia needs to be cut out

Complete fitting kit to install an aftermarket single din Alpine head unit into a 2005-2008 model Mitsubishi Colt with TRIP COMPUTER functions.

This fitting kit includes the Alpine CDE205 single DIN car stereo head unit with DAB/CD/USB and Bluetooth.

This complete fitting kit includes the following:

- Antenna Adapter
- Fascia
- Steering wheel control interface (TRIP COMPUTER RETENTION) with built in Alpine patch
- Alpine CDE205 single DIN car stereo head unit 
- DAB internal windscreen active antenna

Complete fitting kit to install a single DIN head unit and retain the original steering wheel controls in a Vauxhall Corsa D and Meriva B

This kit includes:
-Fascia
-Antenna adapter
-Steering wheel control interface
-Universal patch lead
-Release keys

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete fitting kit to change the original radio in Mercedes vehicles for a single or double din after market unit.

Kit includes:
-Fascia (50-257)
-Steering control interface (49-MB-02)
-Patch lead (49-025)
-Antenna adapter (21-106)

For double din installation the central bar of the fascia needs to be cut out.

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete fitting kit to change the original radio in a Mercedes CLK (C209) facelift (2005-2009) vehicle for a Single DIN after market unit.

Kit includes:
-Fascia
-Steering control interface
-Patch lead
-Antenna adapter

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete fitting kit to change the original radio in a Mercedes CLK (C209) facelift (2005-2009) vehicle for a Double DIN after market unit.

Kit includes:

-Fascia

-Steering control interface

-Patch lead

-Antenna adapter

-Double Din metal cage kit

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete fitting kit to change the original radio in a 2006 - 2009 Mazda MX-5 for a single or double din after market unit.

Kit includes:
- Fascia with brackets
- Steering control interface
- Patch lead
- BOSE amplifier interface

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete fitting kit to install a single head unit in to a BMW X3 E83.

This kit includes:
-Fascia
-Steering control interface
-Universal patch lead
-Antenna adapter

FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete fitting kit to install a single or double DIN head unit and retain the original steering wheel controls in an Audi A3 8P facelift with fully amplified speakers

This kit includes:
-Fascia
-Steering wheel control interface
-Universal patch lead
-Antenna adapter

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete stereo upgrade fitting kit to install a single or double DIN head unit and retain the original steering wheel controls in an Audi A3 8P facelift

This head unit fitting kit includes:
-Fascia adapter panel (50-271)
-Steering wheel control interface for plug and play installation (49-AUD-02)
-Quadlock to ISO plug and play adapter lead (part of 49-AUD-02)
-Universal patch lead for steering control interface (49-025)
-Antenna adapter cable (21-139)

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete fitting kit to install a double DIN head unit

This kit includes:
-Fascia (50-282)
-Steering control interface (29-648)
-Universal patch lead (29-025)

Complete stereo upgrade kit to install a double DIN aftermarket radio and retain the use of the steering wheel controls in a 2015 onward Toyota Avensis or 2018 onward Land Cruiser with original basic radio.

This head unit fitting kit includes:
-Double DIN side fixing fascia brackets (50-282)
-Antenna adapter cable (21-147)
-Steering wheel control interface (29-695)
-Universal patch lead for steering control interface (29-025)

Complete fitting kit to change the original radio in a Mercedes ML vehicle for a single or double din after market unit.

Kit includes:
-Fascia
-Steering control interface
-Patch lead
-Antenna adapter

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete stereo upgrade kit to install a single or double DIN aftermarket radio and retain the use of the steering wheel controls in Chrysler, Dodge and Jeep vehicles from 2005-2008.

This head unit fitting kit includes:

- FM antenna adapter (21-108)

- Steering control and amplifier retention interface (29-UC-050-CHR1)

- UNICAN patch lead set (29-UCCAB-SET) 

- Chrysler, Dodge, Jeep Single/ Double DIN Fascia (50-304)

PLEASE NOTE: This interface comes with a universal patch lead which can be used with Alpine, Kenwood, JVC, Pioneer, Sony and Chinese/ Resistive learning Head-units.

NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.

Complete fitting kit to change the original radio in a 2006 - 2010 Saab 9-5 with original navigation radio for a single or double din after market unit.

Kit includes:
-Fascia
-Steering control interface
-Universal patch lead
-AM/FM antenna adapter
-Amplifier integration interface

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in a SAAB 9-3 (2006-2013) vehicle, originally fitted with either the Delphi Grundig head unit or the Fujitsu Ten head unit.

This complete fitting kit includes:

- Amplifier retention interface (20-273)

- FM antenna adapter (21-108)

- Steering control interface (29-UC-050-SAAB)

- UNICAN patch lead set (29-UCCAB-SET) 

- SAAB 9-3 Mk2 Facelift Single/Double DIN fascia (50-311)

- Double DIN metal cage kit (51-012)

Complete stereo upgrade kit to install a single or double DIN aftermarket radio and retain the use of the steering wheel control in a 2004 to 2008 Mercedes SLK R171 with a basic NTG1 original radio and a non amplified audio system.

This head unit fitting kit includes:
-Flush mount matt black single and double din fascia adapter panel (50-313)
-103mm double din fitting cage kit (51-012)
-Steering wheel control interface (39-MB-A20NTG1)
-Universal patch lead for steering control interface (included in 39-MB-A20NTG1)
-Antenna adapter cable (21-106)

Complete stereo upgrade kit to install a single or double DIN aftermarket radio and retain the use of the steering wheel control in a 2004 to 2008 Mercedes SLK R171 with a basic NTG1 original radio and a harman/kardon fibre optic amplified audio system.

This head unit fitting kit includes:
-Flush mount matt black single and double din fascia adapter panel (50-313)
-103mm double din fitting cage kit (51-012)
-Steering wheel control interface (39-MB-A20NTG1)
-Universal patch lead for steering control interface (included in 39-MB-A20NTG1)
-Antenna adapter cable (21-106)
-Fibre optic amplifier integration interface (23-241)

-5m Fakra male to female extension (21-028)

Complete stereo upgrade kit to install a single or double DIN aftermarket radio and retain the use of the steering wheel control in a 2004 to 2008 Mercedes SLK R171 with an original navigation COMAND NTG1 radio.

This head unit fitting kit includes:
-Flush mount matt black single and double din fascia adapter panel (50-313)
-103mm double din fitting cage kit (51-012)
-Steering wheel control interface (39-MB-UNI)
-Universal patch lead for steering control interface (included in 39-MB-UNI)
-Antenna adapter cable (21-106)

-5m Fakra male to female extension cable (21-028)
-Fibre optic amplifier integration interface (23-241)

Complete stereo upgrade kit to install a single or double DIN aftermarket radio and retain the use of the steering wheel control in a 2009 to 2011 Mercedes SLK R171 with a basic NTG2 or COMAND APS NTG2 original radio and a non amplified audio system.

This head unit fitting kit includes:
-Flush mount matt black single and double din fascia adapter panel (50-313)
-103mm double din fitting cage kit (51-012)
-Steering wheel control interface (39-MB-A20NTG2)
-Universal patch lead for steering control interface (included in 39-MB-A20NTG2)
-Antenna adapter cable (21-106)

Complete stereo upgrade kit to install a single or double DIN aftermarket radio and retain the use of the steering wheel control in a 2009 to 2011 Mercedes SLK R171 with an original harman/kardon fibre optic amplified audio system.

This head unit fitting kit includes:
-Flush mount matt black single and double din fascia adapter panel (50-313)
-103mm double din fitting cage kit (51-012)
-Steering wheel control interface (39-MB-A20NTG2)
-Universal patch lead for steering control interface (included in 39-MB-A20NTG2)
-Antenna adapter cable (21-106)
-Fibre optic amplifier integration interface (23-241)

Complete fitting kit to install a single or double DIN head unit in an Audi A4 B7 with Rear amplified speakers.

Also fits Seat EXEO

This kit includes:
-Fascia
-CAN ignition interface
-Quadlock to ISO harness
-Antenna adapter

Complete fitting kit to install a single or double DIN head unit and retain the original steering wheel controls in an Audi A4 B7 with fully amplified speakers

This kit includes:
-Fascia
-Steering wheel control interface
-Universal patch lead
-Antenna adapter

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete fitting kit to install a single or double DIN head unit and retain the original steering wheel controls in an Audi A4 B7 with amplified rear speakers
Alos fits SEAT  EXEO
This kit includes:
-Fascia
-Steering wheel control interface
-Universal patch lead
-Antenna adapter

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete fitting kit to install a single DIN head unit and retain the original steering wheel controls in Ford cars with the original oval shape radio.

This kit includes:
-Fascia - silver
-Antenna adapter
-Steering wheel control interface
-Universal patch lead

Complete fitting kit to install a single DIN head unit and retain the original steering wheel controls in Ford cars with the original oval shape radio.

This kit includes:
-Fascia
-Antenna adapter
-Steering wheel control interface
-Universal patch lead

Complete fitting kit to change the original radio in a 2007-2011 Honda CR-V for a Single or Double DIN aftermarket unit.

Fits Honda CR-V (2007-2011) car models (WITH BASIC RADIO)

Kit includes:
-Fascia with brackets and pocket
-Steering control interface
-Patch lead
-AM/FM antenna adapter

COLOUR: MATT BLACK

PLEASE NOTE: For cars with factory navigation please use FK-330-NAV

Complete fitting kit to change the original radio in a 2007-2011 Honda CR-V for a Double DIN aftermarket unit.

This kit comes complete with Kenwood DMX5020DABS Double DIN stereo head-unit with Car Play and Android Auto.

Fits Honda CR-V (2007-2011) car models (WITH BASIC RADIO)

This complete fitting kit includes:

- Matt Black Double DIN fascia

- Steering control harness

- AM/FM antenna adapter

- Kenwood DMX5020DABS double din stereo head-unit

- DAB internal windscreen active antenna (70-923)

COLOUR: MATT BLACK

PLEASE NOTE: For cars with factory navigation please use FK-330-NAV or Kenwood Kit FK-330-NAV-DMX1

Complete stereo upgrade fitting kit to change the original radio for a Single or Double DIN aftermarket head unit.

Suitable for Honda CR-V (2007-2011) car models (WITH ORIGINAL TYPE 2VNO NAVIGATION RADIO)

COLOUR: MATT BLACK

PLEASE NOTE: ONLY SUITABLE FOR CARS WITH ORIGINAL TYPE 2VNO NAVIGATION RADIOS, FOR STANDARD ORIGINAL RADIOS PLEASE USE FK-330

Complete fitting kit to change the original radio in a 2007-2011 Honda CR-V for a Double DIN aftermarket unit.

This kit comes complete with Kenwood DMX5020DABS Double DIN stereo head-unit with Car Play and Android Auto.

Suitable for Honda CR-V (2007-2011) car models (WITH ORIGINAL TYPE 2VNO NAVIGATION RADIO)

This complete fitting kit includes:

- Matt Black Double DIN fascia (50-330)

- Steering control and audio harness 

- AM/FM antenna adapter (21-116)

- Kenwood DMX5020DABS double din stereo head-unit

- DAB internal windscreen active antenna (70-923)

PLEASE NOTE: ONLY SUITABLE FOR CARS WITH ORIGINAL TYPE 2VNO NAVIGATION RADIOS

Complete stereo upgrade kit to install a Single DIN aftermarket radio and retain the use of the steering wheel controls in a Renault Megane III (2008-2012), without an original OEM navigation system

This complete fitting kit includes:

- Fakra to DIN aerial adapter cable with 12v phantom power (21-123)

- Renault Megane (2008-2012) steering control interface with Quadlock (29-CTR06)

- Universal Patch Lead (29-CT-025) 

- Renault Megane III (2008-2012) Single DIN car radio fascia (50-370)

PLEASE NOTE: Suitable for Renault Megane III (2008-2012) with standard OEM radio, NOT for cars with factory fitted navigation systems

Complete fitting kit to change the original radio in a 2009-15 facelift Mazda MX-5 for a single or double din after market unit.

Kit includes:
-Fascia with brackets
-Steering control interface
-Patch lead
-Bose amplifier interface

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete fitting kit to install an aftermarket car stereo single DIN head unit into a 1996-1999 model Jaguar XK8 convertible and coupe with original standard audio.

Kit includes:

- Jaguar XK8 single DIN fascia (50-394)
- Steering wheel control interface for Jaguar basic audio 20 PIN connector (29-615)
- Universal patch lead to match the steering control interface to branded aftermarket head units

Complete fitting kit to install an aftermarket car stereo single DIN head unit into a 1996-1999 model Jaguar XK8 convertible and coupe with original standard audio.

This fitting kit includes the Alpine CDE205 single DIN car stereo head unit with DAB/CD/USB and Bluetooth.

Kit includes:
- Jaguar XK8 single DIN fascia (50-394)
- Steering wheel control interface for Jaguar basic audio 20 PIN connector (29-615)
- Alpine patch lead to match the steering control interface
- Alpine CDE205 single DIN car stereo head unit 
- DAB internal windscreen active antenna

Complete fitting kit to install an aftermarket single din head unit into a 1996-1999 model Jaguar XK8 convertible and coupe with original premium audio.

This fitting kit includes the Alpine CDE205 single DIN car stereo head unit with DAB/CD/USB and Bluetooth.

Kit includes,
- Fascia
- Steering wheel control interface
- Amplifier adapter
- Alpine Steering control interface patch lead
- Alpine CDE205 single DIN car stereo head unit 
- DAB internal windscreen active antenna

Complete fitting kit to install an aftermarket single din head unit into a 2000-2005 model Jaguar XK8 convertible and coupe with original standard audio.

This fitting kit includes the Alpine CDE205 single DIN car stereo head unit with DAB/CD/USB and Bluetooth.

Kit includes,

- Fascia
- Steering wheel control interface
- Steering control interface patch lead
- Alpine CDE205 single DIN car stereo head unit 
- DAB internal windscreen active antenna

Complete fitting kit to install an aftermarket single din head unit into a 2000-2005 model Jaguar XK8 convertible with original premium audio.

This fitting kit includes the Alpine CDE205 single DIN car stereo head unit with DAB/CD/USB and Bluetooth.

Kit includes,
- Fascia
- Steering wheel control interface
- Alpine Steering control interface patch lead
- Amplifier bypass cable
- Alpine CDE205 single DIN car stereo head unit 
- DAB internal windscreen active antenna

Kit includes,
- Fascia
- Steering wheel control interface
- Steering control interface patch lead
- Amplifier bypass cable
- Alpine CDE205 single DIN car stereo head unit 
- DAB internal windscreen active antenna

Complete stereo upgrade fitting kit to install a Single/Double DIN head unit into various 2005 onwards Volkswagen car models.

This kit is suitable for VW car models with twin Fakra antenna connections on the back of the original radio 

Includes a pre-wired CANbus interface to generate a key present ignition feed.

This kit includes:

- Twin Fakra antenna adapter (21-139)

- Quadlock to ISO radio adapter harness, with CANbus ignition (20-156-IGN)

- Single/Double DIN flush fit facia adapter with removable pocket (50-395)

Complete stereo upgrade fitting kit to install a single/Double DIN aftermarket radio in various Volkswagen cars (With Lowline instrument display cluster)

This head unit fitting kit includes:

- Twin Fakra antenna adapter (21-139)

- Radio replacement steering wheel adapter interface (49-VW-01)

- Universal SWC Patch Lead (49-025)

- Single/Double DIN flush fit facia adapter with removable pocket (50-395)

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete stereo upgrade fitting kit to install a single/Double DIN aftermarket radio in various Volkswagen cars

This head unit fitting kit includes:

- Twin Fakra antenna adapter (21-139)

- Radio replacement steering wheel adapter interface (49-VW-01)

- Universal SWC Patch Lead (49-025)

- Single/Double DIN flush fit facia adapter with removable pocket (50-395)

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete stereo upgrade fitting kit to install a single/Double DIN aftermarket radio in various Volkswagen cars (With Amplified Sound Systems)

This head unit fitting kit includes:

Twin Fakra antenna adapter (21-139)

Steering wheel control, PDC and climate interface (49-VW-02)

Universal SWC Patch Lead (49-025)

Single/Double DIN flush fit facia adapter with removable pocket (50-395)

Complete stereo upgrade fitting kit to allow the fitting of an aftermarket Single DIN car stereo upgrade.

Suitable for fitting Volkswagen Crafter (2017 onwards) vehicles with factory fitted composition audio (Type 1 or Type 2) head units

Colour: Matt Black

PLEASE NOTE: Only suitable for vehicles originally fitted with Composition Audio (Type 1 or Type 2) head units.

This facia has maximum mounting depth for the aftermarket radio of 55mm

Complete stereo upgrade kit to install a Single DIN aftermarket radio and retain the use of the steering wheel audio controls in Volvo C30/C70/S40 and V50 car models (WITH STANDARD NON-AMPLIFIED SOUND SYSTEMS)

This kit also retains phone button controls, warning chimes/parking sensor audio and provides outputs for Park Brake, Reverse Gear and Speed Pulse.

This kit is the equivalent of Connects2 part: CTKVL11

PLEASE NOTE: ONLY SUITABLE FOR MODELS WITH STANDARD NON-AMPLIFED SOUNDS SYSTEMS, FOR AMPLIFIED SYSTEMS PLEASE USE FK-550-A

Does not retain original display showing any car settings, temperature and fan speed on climate system.

Complete stereo upgrade kit to install a Single DIN aftermarket radio and retain the use of the steering wheel audio controls in Volvo C30/C70/S40 and V50 car models (WITH AMPLIFIED SOUND SYSTEMS)

This kit also retains phone button controls, warning chimes/parking sensor audio and provides outputs for Park Brake, Reverse Gear and Speed Pulse.

This kit is the equivalent of Connects2 part: CTKVL05

PLEASE NOTE: ONLY SUITABLE FOR MODELS WITH AMPLIFIED SOUND SYSTEMS, FOR NON-AMPLIFIED SYSTEMS PLEASE USE FK-550

This kit will power all the speakers apart from centre channel speakers (usually found on Dynaudio Sound Systems)

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in a VW Golf MK7 (2012-2018) with composition media factory fitted. 

This fitting kit will retain vehicle information such as climate control, parking sensors and heated seats to be and display on an aftermarket unit with rear camera input. 

This product is the equivalent of Connects2 part: CTKVW09

PLEASE NOTE: This fitting kit allows for an aftermarket unit with a maximum mounting depth of 160mm

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in a Porsche Macan 95B (2014-2016) car model (NON-AMPLIFIED MODELS) with a PCM 3.1 system. 

This kit also retains the OEM factory fitted Porsche OPS parking sensor graphics, as well as providing output feeds for Park Brake, Speed Pulse, Reverse Gear and Mute. This fitting kit will also retain the factory fitted reverse camera (if the vehicle is equipped with one)

This kit is the equivalent of Connects2 part: CTKPO14

PLEASE NOTE: ONLY SUITABLE FOR MODELS WITH STANDARD NON-AMPLIFED SOUNDS SYSTEMS, FOR AMPLIFIED BOSE SYSTEMS PLEASE USE FK-555-4

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in a Porsche Macan 95B (2014-2016) car model (BOSE MOST AMPLIFIED SYSTEMS) with a PCM 3.1 system. 

This kit also retains the OEM factory fitted Porsche OPS parking sensor graphics, as well maintaining the factory fitted BOSE MOST amplified network on the vehicle.

The interface also provides output feeds for Park Brake, Speed Pulse, Reverse Gear and Mute. This fitting kit will also retain the factory fitted reverse camera (if the vehicle is equipped with one)

PLEASE NOTE: ONLY SUITABLE FOR MODELS WITH BOSE MOST AMPLIFIED SOUNDS SYSTEMS

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in BMW 3-Series (F30, F31, F34) and 4-Series (F32, F33, F36) car models (WITH NON-AMPLIFIED SYSTEMS)

This kit also retains the OEM factory climate controls, as well as the vehicle settings via the top display. This fitting kit will also retain the factory warning chimes/ parking sensor audio (Via the integrated speaker)

This kit is the equivalent of Connects2 part: CTKBM30

PLEASE NOTE: ONLY SUITABLE FOR MODELS WITH STANDARD NON-AMPLIFED SOUNDS SYSTEMS, FOR AMPLIFIED HARMAN KARDON SOUND SYSTEMS PLEASE USE FK-556A

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in BMW 3-Series (F30, F31, F34) and 4-Series (F32, F33, F36) car models (WITH MOST-AMPLIFIED SYSTEMS)

This kit also retains the OEM factory climate controls, as well as the vehicle settings via the top display. This fitting kit will also retain the factory warning chimes/ parking sensor audio (Via the integrated speaker)

PLEASE NOTE: ONLY SUITABLE FOR MODELS WITH THE MOST AMPLIFIED SOUNDS SYSTEMS, FOR NON-AMPLIFIED SOUND SYSTEMS PLEASE USE FK-556

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in BMW X5 (E70) (2007-2013) and X6 (E71) (2008-2014) car models (WITH NON-AMPLIFIED SYSTEMS)

This kit also retains the OEM factory climate controls, as well as providing outputs for speed pulse, park brake and reverse gear. This fitting kit will also retain the factory warning chimes/ parking sensor audio (Via the integrated speaker)

This kit is the equivalent of Connects2 part: CTKBM33

PLEASE NOTE: ONLY SUITABLE FOR MODELS WITH STANDARD NON-AMPLIFED SOUNDS SYSTEMS, FOR AMPLIFIED SOUND SYSTEMS PLEASE USE FK-557-A

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in BMW X5 (E70) (2007-2013) and X6 (E71) (2008-2014) car models (WITH MOST-AMPLIFIED SYSTEMS)

This kit also retains the OEM factory climate controls, as well as providing outputs for speed pulse, park brake and reverse gear. This fitting kit will also retain the factory warning chimes/ parking sensor audio (Via the integrated speaker)

This kit will retain the OEM MOST fiber optic network usually found in amplified BMW sound systems such as Harman Kardon.

PLEASE NOTE: ONLY SUITABLE FOR MODELS WITH MOST-AMPLIFED SOUNDS SYSTEMS, FOR NON-AMPLIFIED SOUND SYSTEMS PLEASE USE FK-557

Complete fitting kit to change the allowing the fitting of an aftermarket MODULAR head unit into a Mini Countryman(R60) and Mini Paceman (R61) (2011-2016) car models (without factory NAV)

This complete fitting kit will retain original features such as audio steering wheel controls and factory fitted parking sensors, if fitted.

This kit comes complete with a Pioneer SPH-EVO64DAB Double DIN (MODULAR HIDEAWAY UNIT) car multimedia head-unit with Car Play and Android Auto.

PLEASE NOTE: ONLY SUITABLE FOR CARS WITHOUT FACTORY NAVIGATION

Complete fitting kit to change the original radio in a Nissan NV200 (2013 Onwards) for an aftermarket Single or Double DIN head unit.

Kit includes:
-Fascia with brackets and removable pocket
-Steering control interface
-Patch lead
-AM/FM antenna adapter

For Single DIN installation please use the pocket provided

Complete stereo upgrade fitting kit to install a double DIN car stereo head unit into a Mitsubishi ASX 2014 onwards

This kit includes:
- Mitsubishi ASX Silver trim fascia (50-656) 
-Steering wheel control interface (29-681)
-Universal patch lead (29-025)

PIANO/GLOSS BLACK

Designed for ASX 2014> models without silver trims on the original OEM fascia

Complete stereo upgrade kit to install a Double din aftermarket radio in a Audi R8 (2007-2015) car model.

This head unit fitting kit includes:

- Antenna adapter cable (21-139)
- Audi R8 fascia adapter kit (50-659)
- Audi steering wheel control interface (49-AUD-02-BOSE)
- Universal 49-series patch lead (49-025)

PLEASE NOTE: FOR AUDI R8 RIGHT HAND DRIVE CAR MODELS ONLY!

FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete stereo upgrade kit to install a double din aftermarket radio in a Audi R8 LEFT HAND DRIVE (2007-2015).

This head unit fitting kit includes:

- Antenna adapter cable (21-139)
- Audi R8 (Left Hand Drive) fascia adapter kit (50-659-LHD)
- Audi steering wheel control interface (49-AUD-02-BOSE)
- Universal 49-series patch lead (49-025)

PLEASE NOTE: FOR AUDI R8 WITH LEFT HAND DRIVE ONLY

FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

This kit is for for Chinese made head-units with self learn steering controls ( KEY1, KEY2 or SWC1, SWC2) 

Fits Nissan Elgrand  (WITH BASIC AUDIO) for an aftermarket unbranded/ Chinese Double DIN head unit.

Kit includes:
- Matt Black Fascia 50-669
- Steering control harness for self learning head-units 20-134-SWC
- Antenna adapter 21-114

THIS KIT IS NOT FOR JAPANESE BRANDED HEAD UNITS (Alpine,Sony,Pioneer, Kenwood, JVC )  use FK-669-J 

For Elgrand models with premium audio you will need to add item 20-273 

Complete fitting kit to change the original radio in a Nissan Elgrand E51 (WITH BASIC AUDIO)

This kit comes complete with Kenwood DMX5020DABS double din stereo head-unit with Car Play and Android Auto.

This complete fitting kit includes the following:

- Matt Black Fascia

- Steering control wiring loom

- Antenna adapter

- Kenwood DMX5020DABS double din stereo head-unit

- DAB internal windscreen active antenna

ONLY SUITABLE FOR E51 ELGRAND MODELS WITH BASIC AUDIO 

Complete fitting kit to change the original radio in a Nissan Elgrand E51 (WITH BASIC AUDIO) for an aftermarket Double DIN head unit.

Kit includes:
- Matt Black Fascia
- Steering control interface
- Patch lead
- Antenna adapter

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS WITH LOOSE WIRE CONNECTIONS YOU WILL REQUIRE A FK-669-CH

ONLY SUITABLE FOR E51 ELGRAND MODELS WITH BASIC AUDIO 

Complete stereo upgrade kit to install a Single or Double DIN aftermarket radio and retain the use of the steering wheel controls in Nissan Qashqai (2007-2013) car models.

This head unit fitting kit includes:
- Antenna adapter
- Steering wheel control interface
- Universal patch lead for steering wheel control interface
- Nissan Qashqai (2007-2013) Double DIN facia MATT BLACK

Complete stereo upgrade kit to install a double din aftermarket radio in a 2008 - 2015 Skoda Superb with original Swing or Bolero radios.

This head unit fitting kit includes:
-Fascia adapter panel kit (50-689)
-Radio adapter cable (20-156-IGN)
-CANbus ignition interface (part of 20-156-IGN)
-Antenna adapter cable (21-140)

Complete stereo upgrade kit to install a single or double din aftermarket radio in a 2008 - 2015 Skoda Superb with original Swing or Bolero radios and retain the use of the original steering wheel audio control buttons.

This head unit fitting kit includes:
-Fascia adapter panels (50-689)
-Radio adapter cable (49-VW-01)
-CANbus steering wheel control interface (part of 49-VW-01)
-Universal patch lead for steering control interface (49-025)
-Antenna adapter cable (21-140)

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete fitting kit to install a double DIN head unit into 2005 onward model Volkswagen cars.
Includes a pre-wired CANbus interface to generate a key present ignition and speed pulse.
This kit has a flush mount fascia with side mounting brackets so no fitting cage is needed.

This kit includes:
-Fascia
-ISO harness with SWC interface
-Antenna adapter
-Patch lead for SWC interface

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete head unit replacement fitting kit to install a Double DIN aftermarket head unit into various Volkswagen models with original Composition Colour, Composition Media and Discover media head units (WITH NEW STYLE QUADLOCK CONNECTOR)

This Complete fitting kit includes:

- Twin Fakra Antenna Adapter (21-139)
- Volkswagen (NEW STYLE QUADLOCK) Steering Wheel Control interface (49-VW-05)
- 49-Series Universal patch lead (49-025)
- Double DIN radio facia adapter (50-699)

PLEASE NOTE: DOES NOT RETAIN ANY MULTIFUNCTION DISPLAY INFORMATION PLEASE USE ONE OF OUR DISPLAY RETENTION FITTING KITS (FK-699-T6-DMX02, FK-699-T6-ILX) TO ACHIEVE THIS

Complete fitting kit to install a Kenwood DMX 8020DABS head unit into Volkswagen Caddy, T6 , Amarok, Beetle 
Includes a pre-wired CANbus interface to provide Ignition, Illumination, Steering controls, Reverse signal, Park Pilot screen retention, Climate control display if in car
This kit has a flush mount fascia with side mounting brackets so no fitting cage is needed.

This kit comes complete with Kenwood DMX-8020DABS double din stereo head-unit with Car Play and Android Auto

This complete fitting kit includes the following:
- Fascia , FM antenna adapter,  DAB antenna fakra adapter, Special CAN bus interface, Kenwood unit

Complete fitting kit to install a Alpine ILX702 head unit head unit into Volkswagen Caddy, T6 , Amarok, Beetle 
Includes a pre-wired CANbus interface to provide Ignition, Illumination, Steering controls, Reverse signal, Park Pilot screen retention, Climate control display if in car
This kit has a flush mount fascia with side mounting brackets so no fitting cage is needed.

This kit comes complete with an Alpine ILX702 stereo head-unit with Car Play and Android Auto

This complete fitting kit includes the following:
- Fascia , FM antenna adapter,  DAB antenna fakra adapter, Special CAN bus interface, Kenwood unit

Complete fitting kit to install a Kenwood DMX 8020DABS head unit into 2005 onward model Volkswagen cars.
Includes a pre-wired CANbus interface to provide Ignition, Illumination, Steering controls, Reverse signal, Park Pilot screen retention, Climate control display if in car
This kit has a flush mount fascia with side mounting brackets so no fitting cage is needed.

This kit comes complete with Kenwood DMX-8020DABS double din stereo head-unit with Car Play and Android Auto

This complete fitting kit includes the following:
- Fascia , antenna adapter, On glass DAB antenna, Special CAN bus interface, Kenwood unit

Complete fitting kit to install a Alpine ILX702 head unit into 2005 onward model Volkswagen cars.
Includes a pre-wired CANbus interface to provide Ignition, Illumination, Steering controls, Reverse signal, Park Pilot screen retention, Climate control display if in car
This kit has a flush mount fascia with side mounting brackets so no fitting cage is needed.

This kit comes complete with an Alpine ILX702 stereo head-unit with Car Play and Android Auto

This complete fitting kit includes the following:
- Fascia , antenna adapter, On glass DAB antenna, Special CAN bus interface, Alpine unit

Complete fitting kit to install double DIN head unit and retain the original steering wheel controls in Ford cars

This kit includes:
-Fascia
-Antenna adapter
-Steering wheel control interface
-Universal patch lead

Complete fitting kit to install double DIN head unit and retain the original steering wheel controls in Ford cars

This kit includes:
- Fascia
- Antenna adapter
- Steering wheel control interface
- Universal patch lead

Complete fitting kit to change the original radio in Mercedes vehicles for a double din after market unit.

Kit includes:
-Fascia (50-711)
-Steering control interface (49-MB-04)
-Patch lead (49-025)
-Antenna adapter (21-106)

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete fitting kit to change the original radio in Mercedes vehicles for a Double DIN after market unit.

This kit comes complete with Kenwood DMX5020DABS Double DIN stereo head-unit with Car Play and Android Auto.

This complete fitting kit includes the following:

- Fascia (50-711)

- Steering control interface (49-MB-04)

- Patch lead (49-005)

- Antenna adapter (21-106)

- Kenwood DMX5020DABS double din stereo head-unit

- DAB internal windscreen active antenna (70-923)

Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio in various Volkswagen cars 2005 onwards with CANbus ignition

This kit comes complete with Kenwood DMX5020DABS double DIN stereo head-unit with Car Play and Android Auto.

This complete fitting kit includes the following:

- Fascia adapter panel (50-714)

- Quadlock to ISO radio adapter harness, with CANbus ignition and antenna adapter (20-156A-IGN)

- Kenwood DMX5020DABS double DIN stereo head-unit

- DAB internal windscreen active antenna

Complete stereo upgrade fitting kit to install a Double DIN head unit into various 2005 onwards Volkswagen car models.

This kit is suitable for VW car models with a single Fakra antenna connection on the back of the original radio

This complete stereo upgrade fitting kit includes:

- Fakra to DIN antenna adapter cable (21-123)

- Radio replacement steering wheel adapter interface (49-VW-01)

- Universal SWC Patch Lead (49-025)

- Double DIN facia adapter panel (50-714)

PLEASE NOTE: If a cage is not included with your aftermarket  head unit, you will require part number 51-013

Complete fitting kit to change the original radio in a 2003 - 2009 VW T5 or Touareg for a double din after market unit.

Kit includes:
-Fascia
-Double din fitting cage
-ISO harness
-AM/FM antenna adapter

Complete fitting kit to change the original radio in a 2003 - 2009 Touareg for a double din after market unit.

Kit includes:
-Fascia
-Double din fitting cage
-ISO harness with CAN ignition interface
-AM/FM antenna adapter

Complete fitting kit to change the original radio in a 2003 - 2009 Touareg for a double din after market unit.

Kit includes:
-Fascia
-Double din fitting cage
-ISO harness with steering control interface
-Patch lead for SWC interface
-AM/FM antenna adapter

Complete fitting kit to install a double DIN head unit and retain the original steering wheel controls in a BMW 3 Series E90

This kit includes:
-Fascia
-Steering wheel control interface
-Universal patch lead
-Antenna adapter

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete fitting kit to install a double DIN head unit and retain the original steering wheel controls in a BMW 3 Series E90 and retain the original parking sensors.

This kit includes:
-Fascia
-Steering wheel control interface
-Universal patch lead
-Antenna adapter
-PDC retention interface

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete fitting kit to install a double DIN head unit and retain the original steering wheel controls in a BMW 3 Series E90 and retain the original parking sensors. This kit also retains the use of the original heated seat and start stop switches.

This kit includes:
-Fascia
-Steering wheel control interface
-Universal patch lead
-Antenna adapter
-PDC retention interface
-Switch relocation kit

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete fitting kit to install a double DIN head unit and retain the original steering wheel controls in a BMW 5 series E39 with the quadlock connector at the back of the radio.

PLEASE NOTE: Not for vehicles with original navigation or Harman/Kardon audio systems

This kit includes:
-Fascia
-Antenna adapter
-Steering wheel control interface
-Universal patch lead

FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete fitting kit to install a double DIN head unit and retain the original steering wheel controls in a BMW 5 series E39 with the round pin connector at the back of the radio.

PLEASE NOTE: Not for vehicles with original navigation or Harman/Kardon audio systems

This kit includes:
-Fascia
-Antenna adapter
-Steering wheel control interface
-Universal patch lead

Complete stereo upgrade fitting kit to install a double DIN aftermarket radio in a BMW X5 E53 car with original sat nav and DSP audio amplifier.

This head unit fitting kit includes:
-Fascia adapter panel (50-770-NAV)
-DSP amplifier bypass cable (20-316)
-Steering wheel control adapter cable (29-721)
-Universal patch lead for steering control adapter (29-025)
-5M antenna extension lead (21-028)
-Antenna adapter cable (21-106)

Complete fitting kit to install a double DIN head unit and retain the original steering wheel controls in a BMW X5 E53

PLEASE NOTE: This kit is for vehicles with original navigation head units

This kit includes:
-Fascia
-Steering wheel control interface
-Universal patch lead
-Antenna adapter
-Antenna extension
-Quadlock extension

Complete fitting kit to install a double DIN head unit and retain the original steering wheel controls in a BMW 3 E46

This kit includes:
-Fascia
-Fitting tray
-Steering wheel control interface
-Universal patch lead
-Antenna adapter

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete stereo upgrade kit to install a double DIN aftermarket radio in a BMW E46 3 Series audio system (BASIC SYSTEM WITH HARMON KARDON)

PLEASE NOTE: This is for BMW E46 3 Series BASIC SYSTEM WITH HARMON KARDON and ROUND PIN CONNECTOR

To fit this kit you will need to cut away and then reseal the heater ducting behind the radio. THIS IS NOT A DIY KIT and will take an experienced engineer 1-2 days.

Complete fitting kit to change the original radio in a 2010 to 2014 (pre facelift) Nissan Juke for an aftermarket Single or Double DIN head unit.

Kit includes:
-Fascia with brackets and pocket
-Steering control interface
-Patch lead
-AM/FM antenna adapter

COLOUR: MATT BLACK

Complete fitting kit to install a double DIN head unit and retain the original steering wheel controls in an Isuzu D-Max

This kit includes:

- Aerial adapter (21-116)
- Black Fascia (50-799)
- Steering wheel control interface (29-697)
- Universal patch lead (29-025)

Complete fitting kit to install a double DIN head unit and retain the original steering wheel controls in an Isuzu D-Max

This kit includes:

- Aerial adapter (21-116)
- Grey/ Gun metal Fascia (50-799/1)
- Steering wheel control interface (29-697)
- Universal patch lead (29-025)

Complete stereo upgrade kit to install a double DIN aftermarket radio in a Dacia Duster (2017 onwards).

This head unit fitting kit includes:

- Fakra male to SMB female DAB adapter 50cm (21-037)

- Fakra to DIN aerial adapter cable (21-123)

- Dacia / Renault (11>) Steering wheel controls (29-696)

- Universal 29-series patch lead (29-025)

- Matt Black Fascia (50-804)

Please note: This installation kit on Dacia Duster cars fitted with the original Renault Visteon head unit

If the vehicle has stop start a start stop voltage stabiliser (10-603) will be required

Complete stereo upgrade fitting kit to install a double DIN aftermarket radio in a Honda Civic 2006 onwards with left hand drive.

This head unit fitting kit includes:
- Honda aerial adapter to male DIN (21-116)
- Honda Civic steering control interface (29-CTH02)
- 29-CT series patch lead (29-CT-025) 
- Honda Civic 2006> D DIN Fascia Left Hand (50-832-LHD)
PLEASE NOTE: This fascia is for LEFT HAND DRIVE cars only.

Complete stereo upgrade fitting kit to install a double DIN aftermarket radio in a Honda Civic 2006 onwards with right hand drive. NOT FOR CARS WITH ORIGINAL SAT-NAV

This head unit fitting kit includes:

- Honda aerial adapter to male DIN (21-116)
- Honda Civic steering control interface (29-CTH02)
- 29-CT series patch lead (29-CT-025) 
- Honda Civic 2006> D DIN Fascia Left Hand (50-832)

PLEASE NOTE: This fascia is for RIGHT HAND DRIVE cars only.

Complete fitting kit to change the original radio in a Hyundai IX35 (2010-2015) 'S' MODEL for an aftermarket Double DIN head unit.

Kit includes:

- Double DIN Fascia with side fixing brackets

- Radio ISO lead

- Hyundai Antenna adapter

PLEASE NOTE: ONLY SUTIABLE FOR 'S' MODELS VARIENTS WITH BASIC AUDIO AND NO STEERING WHEEL CONTROLS

TO RETAIN THE USB/ AUX CONNECTIONS PLEASE USE 24-240

Complete fitting kit to change the original radio in a Hyundai IX35 (2010-2015) 'SE-NAV', 'PREMIUM' and 'PREMIUM PANORAMA' MODELS for an aftermarket Double DIN head unit.

Kit includes:

- Double DIN Fascia with side fixing brackets

- Hyundai 2010 steering wheel control audio interface (FOR DIGITALLY AMPLIFIED SYSTEMS)

- Universal Patch Lead

- Hyundai Antenna adapter

PLEASE NOTE: ONLY SUTIABLE FOR 'SE-NAV, PREMIUM AND PREMIUM PANORAMA' MODEL VARIENTS WITH NAVIGATION AND PREMIUM SOUD

TO RETAIN THE USB/ AUX CONNECTIONS PLEASE USE 24-240

Complete fitting kit to change the original radio in a Hyundai IX35 (2010-2015) 'SE' MODEL for an aftermarket Double DIN head unit.

This kit comes complete with Kenwood DMX5020DABS Double DIN stereo head-unit with Car Play and Android Auto.

Fits Hyundai IX35 (2010-2015) 'SE' Models

This complete fitting kit includes:

Double DIN Fascia with side fixing brackets

Steering Wheel harness

Hyundai Antenna adapter

Kenwood DMX5020DABS double din stereo head-unit

DAB internal windscreen active antenna

PLEASE NOTE: ONLY SUITABLE FOR 'SE' MODELS VARIENTS WITH BASIC AUDIO AND AUDIO CONTROLS ON THE STEERING WHEEL

TO RETAIN THE USB/ AUX CONNECTIONS PLEASE USE 24-240

Complete fitting kit to change the original radio in a Hyundai IX35 (2010-2015) 'SE' MODEL for an aftermarket Double DIN head unit.

Kit includes:

- Double DIN Fascia with side fixing brackets

- Steering Wheel Control interface

- Hyundai Antenna adapter

PLEASE NOTE: ONLY SUTIABLE FOR 'SE' MODELS VARIENTS WITH BASIC AUDIO AND AUDIO CONTROLS ON THE STEERING WHEEL

TO RETAIN THE USB/ AUX CONNECTIONS PLEASE USE 24-240

Complete stereo upgrade fitting kit to install a double DIN aftermarket radio and retain the use of the steering wheel controls in a Vauxhall Corsa D.
The steering control interface will also generate a true key present ignition supply to the new radio.

This head unit fitting kit includes:
-Silver fascia adapter panel (50-841/2)
-Antenna adapter cable (21-123)
-Steering wheel control interface (49-CORSA-D)
-Universal patch lead for steering control interface (49-025)
-Original radio release keys (52-010)
-Double DIN fitting cage (Included in 50-841/2)

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

THIS IS NOT A DIY PRODUCT AND NEEDS PROFESSIONAL INSTALLATION

Complete fitting kit to change the original radio in a Range Rover Sport or Discovery 3 with original Harman/Kardon LOGIC 7 amplified audio system for a double din aftermarket unit and also retain the use of the original nav/vehicle info display screen.

Kit includes:
-Fascia with cage (50-853)
-Steering control interface (29-712)
-Patch lead (29-025)
-Antenna adapter (21-123)
-Amplifier bypass cable (20-314)
-Fibre optic extension cable (part of 29-712)

Complete fitting kit to install a double DIN head unit and retain the original steering wheel controls in Ford cars with the original oval shape radio.( not for cars with CD6000 radio as these need item 29-654-CAN)

This kit includes:
-Fascia and cage fitting kit
-Antenna adapter
-Steering wheel control interface
-Universal patch lead

Complete fitting kit to install a double DIN head unit and retain the original steering wheel controls in Ford cars with the original oval shape radio. (not for cars with CD6000 radio ,these need item 29-654-CAN steering control)

This kit includes:
- Fascia and cage fitting kit - silver
- Antenna adapter
- Steering wheel control interface
- Universal patch lead

Complete fitting kit to install a double DIN head unit and retain the original steering wheel controls in Ford cars with the original Silver oval-shaped radio and CANbus service.

This kit includes CAN ignition and illuminations outputs on the steering wheel control interface.

 
This kit includes:
-Fascia and cage fitting kit
-Antenna adapter
-Steering wheel control interface (WITH CAN)
-Universal patch lead

PLEASE NOTE: This fitting kit is suitable for Ford vehicles with CAN service, for non-CAN vehicles please use FK-876/1 fitting kit

Complete fitting kit to install a double DIN head unit and retain the original steering wheel controls in Ford cars with the original Black oval-shaped radio and CANbus service.

This kit includes CAN igntion and illuminations outputs on the steering wheel control interface.

 
This kit includes:
-Fascia and cage fitting kit
-Antenna adapter
-Steering wheel control interface (WITH CAN)
-Universal patch lead

PLEASE NOTE: This fitting kit is suitable for Ford vehicles with CAN service, for  non-CAN vehicles please use FK-876 fitting kit

Complete fitting kit to install a double DIN head unit and retain the original steering wheel controls in a BMW 1 Series with original manual climate controls.

This kit includes:
-Fascia
-Steering wheel control interface
-Universal patch lead
-Antenna adapter

FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete fitting kit to install a double DIN head unit and retain the original steering wheel controls and parking sensors in a BMW 1 Series with original manual climate controls.

This kit includes:
-Fascia
-Steering wheel control interface
-Universal patch lead
-Antenna adapter
-Parking sensor retention interface

FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete stereo upgrade kit to install a Single or Double DIN aftermarket radio and retain the use of the steering wheel controls in Kia Sportage (2010-2015) car models (WITH BASIC AUDIO)

This head unit fitting kit includes:
- Kia antenna adapter (21-130)
- Steering wheel control interface (29-692)
- Universal patch lead for steering wheel control interface (29-025)
- Kia Sportage (2010-2015) Single/ Double DIN facia DARK GREY (50-884)

PLEASE NOTE: This fitting kit only works on Kia Sportage models with basic audio. Not suitable for SPDIF digitally amplified vehicles

Complete stereo upgrade kit to install a Single or Double DIN aftermarket radio and retain the use of the steering wheel controls in Kia Sportage (2010-2015) car models (WITH BASIC AUDIO)

This head unit fitting kit includes:
- Kia antenna adapter (21-130)
- Steering wheel control interface (29-692)
- Universal patch lead for steering wheel control interface (29-025)
- Kia Sportage (2010-2015) Single/ Double DIN facia METALLIC SILVER (50-884-1)

PLEASE NOTE: This fitting kit only works on Kia Sportage models with basic audio. Not suitable for SPDIF digitally amplified vehicles

Complete fitting kit to change the original radio in Kia Sportage (2010-2015) car models (WITH OEM BASIC AUDIO) for a Double DIN after market unit.

This kit comes complete with Kenwood DMX5020DABS Double DIN stereo head-unit with Car Play and Android Auto.

This complete fitting kit includes the following:

- Metallic Silver Fascia (50-884/1)

- Steering control wiring loom

- Antenna adapter (21-130)

- Kenwood DMX5020DABS double din stereo head-unit

- DAB internal windscreen active antenna (70-923)

PLEASE NOTE: This fitting kit only works on Kia Sportage models with basic audio. Not suitable for SPDIF digitally amplified vehicles

Complete fitting kit to change the original radio in Kia Sportage (2010-2015) car models (WITH OEM BASIC AUDIO) for a Double DIN after market unit.

This kit comes complete with Kenwood DMX5020DABS Double DIN stereo head-unit with Car Play and Android Auto.

This complete fitting kit includes the following:

- Dark Grey Fascia (50-884)

- Steering control wiring loom

- Antenna adapter (21-130)

- Kenwood DMX5020DABS double din stereo head-unit

- DAB internal windscreen active antenna (70-923)

PLEASE NOTE: This fitting kit only works on Kia Sportage models with basic audio. Not suitable for SPDIF digitally amplified vehicles

Complete fitting kit to install a double DIN head unit and retain the original steering wheel controls in a BMW 1 Series with original automatic climate controls.

This kit includes:
-Fascia
-Steering wheel control interface
-Universal patch lead
-Antenna adapter

FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete fitting kit to install a double DIN head unit and retain the original steering wheel controls and parking sensors in a BMW 1 Series with original automatic climate controls.

This kit includes:
-Fascia
-Steering wheel control interface
-Universal patch lead
-Antenna adapter
-Parking sensor retention interface

FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

NOT SUITABLE FOR CAR WITH ORIGINAL NAVIGATION Navi 600

This head unit fitting kit includes:

-Fascia adapter panel (50-890)
-Steering wheel control interface with PDC retention (29-CTVX02)
-Vauxhall to ISO plug and play adapter lead (part of 29-CTVX02)
-Universal patch lead for steering control interface (29-CT-025)
-Antenna adapter cable (21-123)

Complete Double DIN fitting kit for Ford C-MAX (2010 onwards) and Ford Kuga (2012 onwards)

This kit retains both the steering wheel controls and the parking sensors.

Colour: PIANO BLACK

Complete stereo upgrade fitting kit to install a double DIN aftermarket radio in Hyundai (2011-2016) car models with basic audio and steering wheel controls 

This complete head unit fitting kit includes:

- Hyundai antenna adapter (21-130)

- Hyundai steering wheel control audio interface (49-692)

- Universal patch lead for 49- series (49-025)

- Hyundai i40 fascia kit Matt Black (50-901)

COLOUR: MATT BLACK

PLEASE NOTE: Only suitable for cars WITHOUT original OEM touchscreen navigation

Complete stereo upgrade fitting kit to install a double DIN aftermarket radio in Hyundai (2011-2016) car models with basic audio and steering wheel controls 

This complete head unit fitting kit includes:

- Hyundai antenna adapter (21-130)

- Hyundai steering wheel control audio interface (49-692)

- Universal patch lead for 49- series (49-025)

- Hyundai i40 fascia kit Gloss Black (50-901-1)

COLOUR: GLOSS BLACK

PLEASE NOTE: Only suitable for cars WITHOUT original OEM touchscreen navigation

Complete stereo upgrade fitting kit to install a double DIN aftermarket radio in Hyundai cars 2016 onwards DARK GREY

This head unit fitting kit includes:

- Hyundai antenna adapter (21-130)
- Hyundai steering wheel control 2016 audio interface (29-CTSHY016)
- Universal patch lead for 29-CT series (29-CT-025)
- Hyundai i40 fascia kit Dark Grey (50-901)

PLEASE NOTE: Only for cars without OEM navigation

Complete stereo upgrade fitting kit to install a double DIN aftermarket radio in Hyundai cars 2016 onwards GLOSS BLACK

This head unit fitting kit includes:

- Hyundai antenna adapter (21-130)
- Hyundai steering wheel control 2016 audio interface (29-CTSHY016)
- Universal patch lead for 29-CT series (29-CT-025)
- Hyundai i40 fascia kit Gloss Black (50-901-1)

PLEASE NOTE: Only for cars without OEM navigation

Stereo upgrade fitting kit to install a double DIN car stereo head unit into a Mitsubishi ASX 2014 onwards

For fascia with hazard warning switch and passenger airbag stickers use FK-916-X

This kit includes:
- Mitsubishi ASX Silver trim fascia (50-916) 
-Steering wheel control interface (29-681)
-Universal patch lead (29-025)

Stereo upgrade fitting kit to install a double DIN car stereo head unit into a Mitsubishi ASX 2014 onwards

Comes with hazard warning switch and passenger airbag stickers.

This kit includes:
- Mitsubishi ASX Silver trim fascia (50-916-X) 
-Steering wheel control interface (29-681)
-Universal patch lead (29-025)

Complete fitting kit to change the original radio in Mercedes vehicles for a double din after market unit.
FOR VEHICLES WITHOUT SWITCHES BELOW THE RADIO.

Kit includes:
-Fascia
-Steering control interface
-Patch lead
-Antenna adapter

FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete fitting kit to change the original radio in Mercedes vehicles for a double din after market unit.
For vehicles that have switches below the original radio.

Kit includes:
-Fascia with switch relocation panel and harness
-Steering control interface
-Patch lead
-Antenna adapter

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete stereo upgrade fitting kit to install a Single/ Double DIN aftermarket radio and retain the use of the steering wheel controls in a Mazda 6 (2012 Onwards)

This head unit fitting kit includes:

- Male DIN antenna adapter (21-116)

- Steering wheel control interface (29-719)

- Universal patch lead for steering control interface (29-025)

- Single/Double DIN facia adapter panel (50-923)

PLEASE NOTE: Some cars may have an original Bose amplified audio system, these cars will require an additional amplifier adapter interface

Complete fitting kit to install a double din aftermarket head unit into a 2013-2017 Ford Transit Custom van (with a display above the radio)

Colour: Matt grey (Phoenix Silver)

This kit comes with an OEM passenger airbag button FORD-F1799698

PLEASE NOTE:

An additional OEM lock and hazard switch assembly (FORD-F1519127) may be required if the original can not be retained.

This kit is only for vehicles WITH an original display screen above the radio.

Complete fitting kit to install a double din aftermarket head unit into a 2013-2017 Ford Transit Custom van (without a display above the radio)

Colour: Matt grey (Phoenix Silver)

PLEASE NOTE:

An additional OEM lock and hazard switch assembly (FORD-F1519127) may be required if the original can not be retained.

An additional OEM Card Holder (FORD-F1832265) may be required if the original can not be retained.

This kit is only for vehicles WITHOUT an original display screen above the radio.

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete fitting kit to install a double din aftermarket head unit into a 2013-2017 Ford Transit Custom van (without a display above the radio)

Colour: Gloss Grey (Nebula Gloss)

PLEASE NOTE:

An additional OEM lock and hazard switch assembly (FORD-F1519127) may be required if the original can not be retained.

An additional OEM Card holder (FORD-F1832265) may be required if the original can not be retained.

Only for vehicles WITHOUT an original display screen above the radio.

FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete fitting kit to install a double din aftermarket head unit into a 2013-2017 Ford Transit Custom van (without a display above the radio)

Colour: Charcoal (Pegasus)

PLEASE NOTE:

An additional OEM lock and hazard switch assembly (FORD-F1519127) may be required if the original can not be retained.

An additional OEM Card Holder (FORD-F1832265) may be required if the original can not be retained.

Only for vehicles WITHOUT an original display screen above the radio.

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete fitting kit to change the original radio in a 2014 onward Ford Transit Connect with an original display above the radio for a single/double din after market unit.

Kit includes:

-Fascia with brackets

-Steering control interface

-Patch lead

-AM/FM antenna adapter

PLEASE NOTE: This kit comes with the passenger Airbag button already installed in the fascia.

An additional OEM lock and hazard switch assembly (FORD-F1519127) may be required if the original can not be retained.

This kit is only for vehicles with an original display screen above the radio.

Complete fitting kit to change the original radio in a 2014 onward Ford Transit Connect with an original display above the radio for a double din aftermarket unit.

Kit includes:

-Fascia with brackets

-Steering control interface

-Patch lead

-AM/FM antenna adapter

PLEASE NOTE: This kit comes with the passenger Airbag button already installed in the fascia.

An additional OEM lock and hazard switch assembly (FORD-F1519127) may be required if the original can not be retained.

This kit is only for vehicles WITHOUT an original display screen above the radio.

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete fitting kit to change the original radio in a 2014 onward Ford Transit Connect with an original display above the radio for a single/double din after market unit.

Kit includes:

-Fascia with brackets

-Steering control interface

-Patch lead

-AM/FM antenna adapter

PLEASE NOTE: This kit comes with the passenger Airbag button already installed in the fascia.

An additional OEM lock and hazard switch assembly (FORD-F1519127) may be required if the original can not be retained.

This kit is only for vehicles with an original display screen above the radio.

Complete fitting kit to change the original radio in a 2013 onwards Toyota Auris for a single or double din after market unit.

Colour: GLOSS BLACK

Kit includes:
- Fascia with brackets (50-937)
- Steering control interface (29-695)
- Patch lead (29-025)
- Antenna adapter (21-147)

Complete fitting kit to change the original radio in a 2014 onward Fiat Ducato, Citroen Relay and Peugeot Boxer van for a double din after market unit.

Colour: GLOSS BLACK

Kit includes:
-Fascia with brackets
-Steering control interface
-Patch lead
-AM/FM antenna adapter

Complete fitting kit to change the original radio in a Nissan Qashqai (2014-2017) for an aftermarket double din head unit.

This fitting kit is only compatible with Qashqai Visia spec model variants without OEM factory fitted navigation.

This Complete fitting kit includes:
- Fascia with brackets
- Steering control interface
- Patch lead
- AM/FM antenna adapter

PLEASE NOTE: For Qashqai Visia model variants only. The steering control interface included in this kit has 20 and 32 pin connectors, check that these match the original connectors in the car.

Other versions have 20 and 24 pin connectors.

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in a 2010 onwards Vauxhall Movano, Renault Master or Nissan NV400 van.

This head unit fitting kit includes:

- Fakra to DIN car aerial antenna adapter cable (Part of 29-UC-050-REN3)

- Steering wheel control interface (29-UC-050-REN3)

- UNICAN patch lead set (29-UCCAB-SET) 

- Double DIN fascia with side fix brackets (50-948)

PLEASE NOTE: This fitting kit comes with a universal patch lead which can be used with Alpine, Kenwood, JVC, Pioneer, Sony and Chinese/ Resistive learning Head-units.

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in a 2010 onwards Vauxhall Movano, Renault Master or Nissan NV400 van.

This head unit fitting kit includes:

- Fakra to DIN car aerial antenna adapter cable (21-106)

- Steering wheel control interface (29-UC-050-REN1)

- UNICAN patch lead set (29-UCCAB-SET) 

- Double DIN fascia with side fix brackets (50-948)

PLEASE NOTE: This fitting kit comes with a universal patch lead which can be used with Alpine, Kenwood, JVC, Pioneer, Sony and Chinese/ Resistive learning Head-units.

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in a 2010 onwards Vauxhall Movano, Renault Master or Nissan NV400 van.

This head unit fitting kit includes:

- ISO to DIN antenna adapter (21-100)

- Steering wheel control interface (29-608)

- Universal 29-series patch lead (29-025) 

- Double DIN fascia with side fix brackets (50-948)

PLEASE NOTE: This fitting kit comes with a universal patch lead which can be used with Alpine, Kenwood, JVC, Pioneer, Sony and Chinese/ Resistive learning Head-units.

Complete stereo upgrade kit to install a single or double DIN aftermarket radio in a Porsche Boxster, Cayman or 911 cars without Bose audio.

This head unit fitting kit includes:
-Silver flush mount fascia fitting kit (50-959/1)
-Antenna adapter cable (21-106)
-Car radio replacement adapter cable (20-187-IGN)
-CANbus ignition interface (part of 20-187)

Complete stereo upgrade kit to install a single or double DIN aftermarket radio in a Porsche Boxster, Cayman or 911 cars withCDR24 or PCM2.1 radios and Bose amplified audio systems.

This head unit fitting kit includes:
-Silver flush mount fascia fitting kit (50-959/1)
-Antenna adapter cable (21-106)
-Car radio replacement adapter cable (20-187-IGN)
-CANbus ignition interface (part of 20-187-IGN)
-Bose fibre optic retention interface (23-240)

Complete stereo upgrade kit to install a single or double DIN aftermarket radio in a Porsche Boxster, Cayman or 911 cars without Bose audio, and retain the use of the original steering wheel audio controls.

This head unit fitting kit includes:

-Silver flush mount fascia fitting kit (50-959/1)

-Antenna adapter cable (21-106)

-Steering wheel control interface (49-POR-02)

-Radio replacement adapter cable (part of 49-POR-02)

-Universal steering control interface patch lead (49-025)

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete stereo upgrade kit to install a single or double DIN aftermarket radio in a Porsche Boxster, Cayman or 911 cars without Bose audio, and retain the use of the original steering wheel audio controls.

This head unit fitting kit includes:
-Matt black flush mount fascia fitting kit (50-959)
-Antenna adapter cable (21-106)
-Steering wheel control interface (49-POR-03)
-Radio replacement adapter cable (part of 49-POR-03)
-Universal steering control interface patch lead (49-025)

FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED PATCH LEAD 

Complete stereo upgrade kit to install a single or double DIN aftermarket radio in a Porsche Boxster, Cayman or 911 cars with PCM3 radios and Bose amplified audio systems and to retain the use of the original steering wheel audio controls.

This head unit fitting kit includes:
-Matt black flush mount fascia fitting kit (50-959)
-Antenna adapter cable (21-106)
-Steering wheel control interface (49-POR-03)
-Radio replacement adapter cable (part of 49-POR-03)
-Universal steering control interface patch lead (49-025)
-Bose fibre optic retention interface (23-240)

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete stereo upgrade fitting kit to install a single or double din aftermarket radio and retain the use of the steering wheel controls and original amplifier in a Volvo V70 2000 - 2005 car.

This head unit fitting kit includes:
-Fascia adapter panel (50-961)
-Steering control interface (39-VOL-02)
-Volvo to ISO radio adapter cables (part of 39-VOL-02)
-Phono amplifier adapter cables (part of 39-VOL-02)
-Volvo to DIN antenna adapter (21-104)

Complete stereo upgrade kit to install a single or double din aftermarket radio and retain the use of the steering wheel controls in a 2013 onward Ford Transit with no display above the radio.

This head unit fitting kit includes:
-Fascia with brackets (50-968)
-Steering control interface (49-722)
-Patch lead (49-025)
-AM/FM antenna adapter (21-106)

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD