BMW 3 series (E90) Double DIN stereo upgrade fitting kit (WITH SWC RETENTION)

Fakra to DIN antenna adapter cable (21-106)

This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade.

Steering wheel control interface (29-UC-050-BMW)

Steering wheel control interface and adapter cable for various BMW and Mini cars to fit an aftermarket radio upgrade.

The cable adapts from the Quadlock connector in the car to standard ISO aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.

The CANbus steering wheel control interface is built in to the adapter cable for a plug and play installation.

This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume, track skip, source and phone buttons.

The CANbus interface will also provide CANbus key present ignition, illumination, speed pulse, reverse gear and handbrake outputs.

A key present ignition means the stereo will turn on with the first click of the key and stay on until the key is removed from the ignition barrel.

Compatibility Notes

Some BMW cars go into Eco mode and the +12V supply to the radio drops causing the memory of the new radio to be lost, these cars will need a power supply directly from the battery to be supplied.

This is an alternative product to 49-BMW-01

UNICAN patch lead set (29-UCCAB-SET) 

Patch cable set to connect a UNICAN interface between an after market head unit and the steering wheel controls. Can be used with Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive Programmable head units with either two wires or a 3.5mm jack.

BMW 3-Series Double DIN fascia adapter (50-746)

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version. This kit uses side fixing brackets for a flush fit, so no radio cage is needed.

Fits BMW 3-Series E90 (2005-2013) including E91 Touring, E92 Coupe and E93 Convertible

Only for models without OEM navigation and with automatic climate control / air conditioning. If your car has heated seats or start/stop then you will also need to purchase 50-746-ASH to relocate the switches to replace the ash tray.

COLOUR: MATT BLACK

PLEASE NOTE: Some cars with start/stop technology may require an additional voltage stabiliser to prevent the radio turning off when the engine restarts.

Useful tools (Sold Separately)

• Trim Panel Tool Set - A must have for any installer who has to remove plastic trim, to avoid damage to the delicate finishes on both interior and exterior trim. These trim tools are made from a nylon with a non-damaging finish to avoid cosmetic blemishes to the interior or exterior of your vehicle from removing panels and trim.

• Digital Multimeter - A small, low cost multimeter, a useful tool for testing and finding issues with car electrics and audio systems, and an essential tool for novices as well as car audio professionals.

• Led Headlamp Torch - Gives great visibility when working on a vehicle in the workshop, great for locating those dark hard-to-see locations during an installation.

• Disposable Gloves - Offer great protection for your hands during installations. Also trusted across various sectors, including automotive, agriculture, healthcare, food and catering, manufacturing, and more.