CANbus steering control and Amplifier Turn On interface for Chrysler, Dodge and Jeep vehicles.
Switches on the original amplifier, retains the use of the steering wheel controls and give speed pulse, handbrake and reverse gear CAN outputs.
This interface connects to the CANbus wires at the back of the radio. These are white and white/orange wires in pins 5 and 6 in the 22 way connector. Vehicles from 2005 generally had the CANbus wires present at the radio. We do recommend removing the head unit to check if the CANbus wires are present if the vehicle around a 2005 production year.
The CANbus interface retains the use of the original audio controls on the steering wheel with an after market head unit.
The interface also switches on the original amplifier in the car via a CANbus turn on signal.
Gives out speed pulse, reverse gear and handbrake CANbus signals.
This model is universal and can be used with Alpine, Clarion, JVC, Kenwood, Pioneer and Sony Head-units.
This model is NOT suitable for Chrysler Sebring!
Car models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Chrysler - 300C 1st Gen (2005 - 2011)
Chrysler - PT Cruiser (2006 - 2008)
Dodge - Caliber (2006 - 2008)
Jeep - Commander (XK) (2006 - 2009)
Jeep - Compass 1st Gen (MK49) (2007 - 2009)
Jeep - Grand Cherokee 3rd Gen (WK) (2005 - 2010)
Jeep - Patriot (MK74) (2007 - 2013)
Jeep - Wrangler 3rd Gen (JK) (2007 - 2012)