WORKSHOP TRADE PARTS
Fuses and fuseholders
The RECOIL Mini-ANL 2-Way Inline Fuse Holder distributes power safely for car audio and amplifier setups. Supports 1×0/2/4?AWG input and 2×4/8?AWG outputs, with 2×60A, 2×80A, 2×100A Mini-ANL fuses for flexible protection. Forged brass terminals ensure maximum power transfer, while the marine-grade chrome finish and high-temperature polycarbonate base provide corrosion resistance and insulation. Easily branch your main power wire to connect multiple amplifiers, delivering a clean, professional, and safe installation.
This RECOIL Mini-ANL inline fuse holder is designed for 4–8 AWG car audio power wiring, ideal for protecting amplifier installations and high-current electrical circuits. It accepts Mini-ANL fuses from 60A to 100A and includes forged brass terminals, a marine-grade satin chrome finish, and a high-temperature polycarbonate housing. Easy to install and perfect for both professional and DIY car audio setups.
12V ignition spur from cigarette lighter or accessory power socket circuit. Comes with 10 amp fuse in the spur with a female bullet connection.
Use for hard wiring 12v ignition feed to radios where a CAN interface is not available or for dash cams and other accessories that require 12v with the ignition of the car.
Suitable for use with many European vehicles.
20 Amp Yellow Micro3 blade fuses (10pcs pack)
YELLOW
10 pcs per pack
Can be used with our Micro3 blade fuse holder tap spur (83-229-10)
10 Amp Micro3 blade fuses (10pcs pack)
RED
10 pcs per pack
Can be used with our Micro3 blade fuse holder tap spur (83-229-10)
20 Amp Yellow ACZ (Micro 2) blade fuses (100pcs pack)
YELLOW
100 pcs per pack
Can be used with our ACZ (Micro 2) blade fuse holder tap spur (83-228-10)
20 Amp mini (ACN) blade automotive fuse
YELLOW
100 pcs per pack
Can be used with our MINI ACN blade fuse holder tap spur (83-227-10)
20 amp mini ATS blade automotive fuse
YELLOW
100 pieces per pack
These work with our MINI ATS BLADE Fuse Holders (83-226-10)
10 amp mini (APM, ATM) blade automotive fuse
RED
100 pcs per pack
Can be used with our MINI ATS BLADE Fuse Holders (83-226-10)
20 amp standard (ATO, ATC, APR) blade automotive fuse
YELLOW
100 pcs per pack
These can be used with our ATO ATC dual-slot blade fuse holders (83-225-10)
Mini ANL fuse holder gold plated (6-20mm2)
For cable protection of 6-20 mm² and a current of 10-150 A.
Note: Please use wire end sleeves for protection to protect the cable strands and for better contact
20 Amp Yellow ACZ (Micro 2) blade fuses (10pcs pack)
YELLOW
10 pcs per pack
Can be used with our ACZ (Micro 2) blade fuse holder tap spur (83-228-10)
10 amp mini (ACN) blade automotive fuse
RED
10 pcs per pack
Can be used with our MINI ACN blade fuse holder tap spur (83-227-10)
Pack of 10 Micro2 ACZ add-a-circuit blade fuse tap holders for adding an independently fused accessory circuit through a compatible vehicle fuse box. Each dual-slot holder protects the original circuit and the new accessory circuit separately. Ideal for hardwiring dash cams, reversing cameras, GPS units, LED lighting and other low-current automotive accessories without cutting or splicing the original wiring. Fuses are sold separately.
Can be used with our 10 Amp Red (83-610) and 20 Amp Yellow (83-620B) ACZ (Micro 2) blade fuses
Pack of 10 Low-Profile Mini ACN add-a-circuit blade fuse tap holders, designed to add an independently fused accessory circuit through a compatible vehicle fuse box. Each dual-slot holder protects the original circuit and the newly installed accessory circuit separately. Ideal for hardwiring dash cams, reversing cameras, GPS units, LED lighting and other low-current automotive accessories without cutting the original wiring. Fuses are sold separately.
These can be used with our 10 Amp (83-510) and 20 Amp (83-520B) Mini ACN blade fuses
Trade pack of ten Mini ATS add-a-circuit blade fuse taps. Each dual-slot holder retains fuse protection for the vehicle’s original circuit while adding a separately fused accessory output. Ideal for hardwiring dash cams, radios, GPS devices, LED lighting and reversing cameras without cutting or splicing factory wiring. Suitable for Mini ATS, ATM and APM blade fuse boxes and rated up to 20A per slot. Fuses sold separately.
Trade pack of ten standard ATO/ATC add-a-circuit blade fuse taps. Each dual-slot holder retains fuse protection for the vehicle’s original circuit while adding a separately fused accessory output. Ideal for hardwiring dash cams, radios, GPS devices, LED lighting and reversing cameras without cutting or splicing the factory wiring. Suitable for standard blade fuse boxes and rated up to 20A per slot. Fuses are sold separately.
These can be used with our 10 Amp Red standard ATO blade fuses (83-310) and 20 Amp Yellow (83-320B)
20 amp mini ATS blade automotive fuse
YELLOW
10 pieces per pack
These work with our MINI ATS BLADE Fuse Holders (83-226-10)
10 amp mini (APM, ATM) blade automotive fuse
RED
10 pcs per pack
Can be used with our MINI ATS BLADE Fuse Holders (83-226-10)
10 amp standard (ATO, ATC, APR) blade automotive fuse
RED
10 pcs per pack
These can be used with our ATO ATC dual-slot blade fuse holders (83-225-10)
© Copyright 2026 InCarTec. All Rights Reserved