Retain vehicles original camera on new head unit (Retaining)

Camera Input and Retention interfaces

Cables to keep the cars original reverse back-up camera and connect to a new aftermarket monitor or head-unit

Redirect to our Homepage

Unfortunately, there were no matches for . Please try a new search.

12V to 6V voltage converter for original reverse cameras

12V to 6V voltage converter for original reverse cameras

Converts 12V DC to 6V DC to provide a suitable power supply to a cars original parking camera.

PLEASE NOTE: This is not a camera interface. If you are looking to add or retain a camera please visit our car specific camera interface range

Stock code: 10-671
Price: £24.99 (£29.99 inc VAT)
Fakra male to PHONO female socket

Fakra male to PHONO female socket

Universal Blue male  Fakra (code Z) to female PHONO socket. 
For video input 
Stock code: 21-019
Price: £12.46 (£14.95 inc VAT)
Retain a camera on Honda vehicles WITH ORIGINAL 2VN0 NAV HEAD UNITS (7 Pin Green connector)

Retain a camera on Honda vehicles WITH ORIGINAL 2VN0 NAV HEAD UNITS (7 Pin Green connector)

Allows you retain the original OEM camera on a Honda 2VN0 navigation system when installing a new aftermarket head unit.

Suitable for 2VN0 units with a Green 7 Pin connector

PLEASE NOTE: For 2VN0 Navigation Systems only. Please check connections in instructions for compatibility  

Stock code: 27-229
Price: £41.66 (£49.99 inc VAT)
Retain original  OEM camera on VW  MIB cars and T6 vans

Retain original OEM camera on VW MIB cars and T6 vans

This camera  cable  is used in conjunction with a new Quadlock cable and allows you to retain the use of the original reverse camera when fitting an aftermarket head unit. Suitable for Volkswagen Transporter T6 vans/vehicles and Car with the MIB 2  system.


Stock code: 27-232
Price: £10.83 (£13.00 inc VAT)
Retain original Camera on Ford Transit Euro 5/6  (With small 4.2 inch screen)

Retain original Camera on Ford Transit Euro 5/6 (With small 4.2 inch screen)

Retain original Camera on Ford Transit Euro 5/6  (With small 4.2 inch screen)

This Camera interface cable allows you to retain the original factory fitted camera when fitting an aftermarket head unit on Ford Transit Euro 5 and Euro 6 models (With the smaller 4.2 inch screen display)

PLEASE NOTE: ONLY SUITABLE FOR FORD TRANSIT EURO 5/ EURO 6 MODELS WITH SMALLER 4.2 INCH DISPLAY) 

Stock code: 27-236
Price: £24.58 (£29.50 inc VAT)
Fiat U-Connect 2016 onwards Navigation Camera Retention Cable (MQS Pins )

Fiat U-Connect 2016 onwards Navigation Camera Retention Cable (MQS Pins )

Use this cable to retain an original fitment camera when fitting a new head unit.

For Fiat, Alfa Romeo, Lancia and other Fiat Chrysler group vehicles built after 2014 with original reverse camera.

Stock code: 27-241
Price: £7.49 (£8.99 inc VAT)
Retain original Camera  Hyundai Kia

Retain original Camera Hyundai Kia

Cable to keep the use of the original fitted reverse camera on cars with  original AVN head-unit . 24pin camera connector.
Stock code: 27-245
Price: £29.16 (£34.99 inc VAT)
Retain Nissan original  rear view back up camera

Retain Nissan original rear view back up camera

24 Way connector and voltage adapter to keep the use of the original fitted reverse camera with an aftermarket head unit.
NOT SUITABLE FOR BIRDS EYE 360 camera system 
Stock code: 27-246
Price: £29.16 (£34.99 inc VAT)
Add or retain a Camera on select Toyota (2012 Onwards) vehicles (24 Pin connector)

Add or retain a Camera on select Toyota (2012 Onwards) vehicles (24 Pin connector)

Adapter harness to retain the use of the original reverse camera when fitting an aftermarket head unit.
This harness can also be used to add an aftermarket camera to the original head unit.

PLEASE NOTE: This product requires an additional 12V to 6V voltage converter, part number 10-671 

Stock code: 27-251
Price: £22.49 (£26.99 inc VAT)
Honda 2015 camera retention cable

Honda 2015 camera retention cable

Retain original camera and Aux in on select Honda cars without touchscreen

Stock code: 27-252-6v
Price: £33.25 (£39.90 inc VAT)
Hyundai /Kia (with nav) camera retention cable 24 pin

Hyundai /Kia (with nav) camera retention cable 24 pin

Cable to retain the existing original camera and use it on an aftermarket screen

Stock code: 27-253-6V
Price: £33.25 (£39.90 inc VAT)
Retain a camera on Honda vehicles WITH ORIGINAL 2VN3 NAV HEAD UNITS (7 and 8 Pin Grey)

Retain a camera on Honda vehicles WITH ORIGINAL 2VN3 NAV HEAD UNITS (7 and 8 Pin Grey)

Allows you retain the original OEM camera on a Honda 2VN3 navigation system when installing a new aftermarket head unit.

Suitable for 2VN3 units with 7 and 8 pin Grey connectors.

PLEASE NOTE: For 2VN3 Navigation Systems only. Please check connections in instructions for compatibility  

Stock code: 27-259
Price: £41.66 (£49.99 inc VAT)
Retain a camera on select Izuzu/ Suzuki vehicles (With Green 5 Pin connector)

Retain a camera on select Izuzu/ Suzuki vehicles (With Green 5 Pin connector)

Retention camera interface allowing you to retain/ keep the factory OEM fitted reverse view camera on selected Suzuki and Izuzu cars, when replacing with a new aftermarket head unit.

This interface is compatible with all touch screen models from 2012 onwards.

Stock code: 27-264
Price: £18.74 (£22.49 inc VAT)
Volkswagen Skoda Camera Retention RGB Interface for RNS510, RNS315 and RCD510

Volkswagen Skoda Camera Retention RGB Interface for RNS510, RNS315 and RCD510

Retain original Camera on Volkswagen and Skoda cars with an RGB camera

This Camera interface cable allows you to retain the original factory fitted camera when fitting an aftermarket head unit on various Volkswagen and Skoda vehicle models

PLEASE SEE LONG DESCRIPTION FOR FULL COMPATIBILITY

Stock code: 27-266
Price: £49.99 (£59.99 inc VAT)
Subaru (2015 Onwards) with OEM 7 inch Screen Camera Retention Harness (5 PIN)

Subaru (2015 Onwards) with OEM 7 inch Screen Camera Retention Harness (5 PIN)

Use this cable to retain an original fitment camera when fitting a new head unit. Comes with 12v to 6v voltage adapter.

Also for Subaru cars with original 7" screen built from 2015 onwards

Stock code: 27-267
Price: £24.99 (£29.99 inc VAT)
Chrysler, Dodge, Jeep Camera Retention Harness (22 PIN)

Chrysler, Dodge, Jeep Camera Retention Harness (22 PIN)

Use this cable to retain an original fitment camera when fitting a new head unit.

For Chrysler, Dodge, Jeep and RAM cars and trucks with original equipment reverse camera.

Stock code: 27-268
Price: £17.50 (£21.00 inc VAT)
Honda Civic and CRV 2012 - 2017 Reverse Camera Retention Interface

Honda Civic and CRV 2012 - 2017 Reverse Camera Retention Interface

Allows you retain the original OEM camera on European models of Honda Civic or CRV (2012-2017)

Also fits 2008-2014 Honda Jaz with original Navigation

Suitable for original head units with 7 pin Grey camera connectors.

PLEASE NOTE: designed for used with our steering wheel control interfaces with reverse trigger output.

Stock code: 27-269
Price: £39.16 (£46.99 inc VAT)
General Motors, Chevrolet, 2012> Navigation Camera Retention Harness (20 PIN)

General Motors, Chevrolet, 2012> Navigation Camera Retention Harness (20 PIN)

Use this cable to retain an original fitment camera when fitting a new head unit.

For General Motors, Chevrolet, Cadillac and GMC 2012 onwards cars and trucks with original equipment navigation and reverse camera.

Stock code: 27-270
Price: £17.50 (£21.00 inc VAT)
Toyota (JDM models) 4 Pin Camera Retention Interface with 6v converter

Toyota (JDM models) 4 Pin Camera Retention Interface with 6v converter

Allows you retain the original OEM camera on mostly Japanese Domestic Market model Toyotas with 6v rear camera.

Suitable for original head units with 4 pin camera connector.

PLEASE NOTE: European and Japanese spec cars often have different head units - if your model was sold in both markets, please check the connections before ordering

Stock code: 27-271
Price: £20.83 (£25.00 inc VAT)
Add camera to Ford OEM Sync 2 and 3 systems (CODING REQUIRED)

Add camera to Ford OEM Sync 2 and 3 systems (CODING REQUIRED)

Reverse Camera input adaptor for Ford Sync 2 8 inch & Sync 3 Systems. Vehicle Coding required

Enables connection of a aftermarket backup camera to the original OEM system. 

Stock code: 27-317
Price: £32.50 (£39.00 inc VAT)
Toyota Alphard/ RAV4 Audio Steering control interface with camera retention

Toyota Alphard/ RAV4 Audio Steering control interface with camera retention

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface for Toyota RAV4 cars allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit, as well as retaining the use of the original OEM camera.

Suitable for Toyota Alphard (2002 - 2008) and RAV4 (2006 - 2012) vehicle models.

Stock code: 29-648-RAV4CAM
Price: £65.83 (£79.00 inc VAT)
Subaru Forester 2008 - 2012 with Kenwood Navigation Steering Wheel Control and OEM Camera Interface

Subaru Forester 2008 - 2012 with Kenwood Navigation Steering Wheel Control and OEM Camera Interface

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit, as well as retaining the use of the original OEM camera.

Suitable for Subaru Forester (SH) (2008-2012) with original Kenwood Navigation head unit.

Stock code: 29-730-CAM
Price: £65.83 (£79.00 inc VAT)
Mitsubishi Shogun Sport (2016-2019) Steering Control Interface with 360 Camera Retention

Mitsubishi Shogun Sport (2016-2019) Steering Control Interface with 360 Camera Retention

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface also retains the use of the 360 panoramic camera system and provides outputs for parking brake, speed pulse and reverse.

Will also retain OEM amplifier and factory phone buttons (if equipped)

Suitable for Mitsubishi Montero Sport, Pajero Sport and Shogun Sport (2016-2019) car models

Stock code: 29-CTSMT010-360
Price: £174.99 (£209.99 inc VAT)
Nissan Qashqai (15-18) Xtrail (17-18) Steering Control Interface with 360 Camera Retention

Nissan Qashqai (15-18) Xtrail (17-18) Steering Control Interface with 360 Camera Retention

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description
Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.
This interface also retains the use of the 360 panoramic camera system and provides outputs for parking brake, speed pulse and reverse gear.
Suitable for Nissan Qashqai (2015-2018) and X-Trail (2017-2018) car models.
Stock code: 29-CTSNS025-360
Price: £174.99 (£209.99 inc VAT)
Nissan Navara (2016-2019) Steering Control Interface with 360 Camera Retention

Nissan Navara (2016-2019) Steering Control Interface with 360 Camera Retention

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface also retains the use of the 360 panoramic camera system and provides outputs for parking brake, speed pulse and reverse gear.

Suitable for Nissan Navara (2016-2019) and Nissan Terra (2018 Onwards) car

Stock code: 29-CTSNS026-360
Price: £174.99 (£209.99 inc VAT)
Subaru Impreza (2017-2021) Steering Control Interface with Camera Retention

Subaru Impreza (2017-2021) Steering Control Interface with Camera Retention

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface will also retain OEM Phone Buttons, AUX input and reverse camera (If equipped)

Suitable for Subaru Impreza (2017-2021) car models

Stock code: 29-CTSSU006
Price: £59.95 (£71.94 inc VAT)
Toyota Land Cruiser Prado (14-19) Rav4 (16-18) Steering Control Interface with 360 Camera Retention

Toyota Land Cruiser Prado (14-19) Rav4 (16-18) Steering Control Interface with 360 Camera Retention

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface also retains the use of the 360 panoramic camera system and provides outputs for parking brake, speed pulse and reverse gear.

Suitable for various Toyota models from 2014-2019

Stock code: 29-CTSTY019-360
Price: £174.99 (£209.99 inc VAT)
Toyota Rav4 (2019 onwards) Steering Control Interface with 360 Camera Retention

Toyota Rav4 (2019 onwards) Steering Control Interface with 360 Camera Retention

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface also retains the use of the 360 panoramic camera system and provides outputs for parking brake, speed pulse and reverse gear.

Suitable for Toyota RAV4 (2019 Onwards) with amplified sound systems

Stock code: 29-CTSTY020-360
Price: £174.99 (£209.99 inc VAT)