Cables and interfaces for adding rear back-up reversing camera's to the cars original navigation monitor or car radio screen
Interfaces for adding front and rear camera's to cars OEM system
8 pin camera adapter cable to allow you to add an aftermarket rear view camera to OEM monitors on various Subaru models from 2008-2015.
Fits cars with original Kenwood navigation or car with the 4.3" screen and navigation
28 pin camera adapter cable to allow you to add an aftermarket rear view camera to OEM monitors MFD GEN5.
Suits Toyota Land Cruiser 200 (07-09) and various Lexus models GS, LS,(07-09) , IS250 and 350 from (06-09)
40 pin camera adapter cable to allow you to add an aftermarket rear view NTSC camera to OEM monitors on Toyota Prius/ Lexus RX models with MFD GEN5 multi-displays.
PLEASE NOTE: Only suitable for NTSC cameras
8 pin camera adapter cable to allow you to add an aftermarket rear view camera to OEM monitors on Toyota/ Citroen and Peugeot cars with X-Touch/ X-Nav systems.
40 pin OEM camera adapter cable to allow you to add an aftermarket rear view camera to Nissan Leaf cars with OEM Nissan EV GEN1 and EV GEN2 multimedia systems.
This 32 pin OEM camera adapter cable to allow you to add an aftermarket rear view camera to Nissan models with Nissan Audio multimedia systems (WITHOUT NAVIGATION)
This cable will allow you to add an aftermarket camera to OEM Honda navigation systems which have a green 7 PIN connection on the back of the head unit .
Suits Honda 2VNO navigation units (with green 7 PIN connection)
Fits Honda models before 2012 with original navigation model 2VN3 and 08A40-3M6-401 type 9953485
Enables you to connect an aftermarket back up camera to the original OEM screen.
24 pin OEM camera adapter cable to allow you to add an aftermarket rear view camera to Honda cars with OEM Honda i-MID 8" and touch screen Monitors.
Reverse Camera input adaptor for Ford SYNC 1 Systems with a 4.2" colour screen. Vehicle Coding required
Enables connection of a aftermarket backup camera to the original OEM SYNC system.
Enables addition of an aftermarket NTSC reversing camera to the original Mazda screen.
Camera adapter cable to allow you to add an aftermarket rear view camera to OEM monitors on Ford cars with Sync 1 displays (LVDS to Phono)
CAR WILL NEED TO BE CODED TO ACTIVATE THE CAMERA INPUT
Allows you to add an aftermarket camera to the OEM screen on a Mercedes factory fitted head unit.
PLEASE NOTE: This cable is only compatible with single fakra connections. Double fakra connections are not supported. NTSC only
You will need to code the head unit for camera input.
Reverse camera adapter lead for Suzuki cars. Add an aftermarket reverse camera to a Suzuki car with original navigation head units.
Reverse camera adapter lead for Clarion NX504E, NX503E and FX503E head units.
Adapter harness to retain the use of the original reverse camera when fitting an aftermarket head unit.
This harness can also be used to add an aftermarket camera to the original head unit.
PLEASE NOTE: This product requires an additional 12V to 6V voltage converter, part number 10-671
Cable to add a camera or retain the existing original camera on cars with original navigation
Cable to allow you to add a camera to the original car screen or to retain the original camera to use on an aftermaket head-unit
If retianing original camera then 12volt to 6v converter item 10-671 will be needed
Cable to retain the original camera or to add an aftermaket camera to select Subaru cars 2015 onwards
Cable to add a camera to the existing Nissan 4.3inch screen on select Nissan cars 2015 onwards
Add an aftermarket reverse camera to the original media head unit.
Reverse camera adapter lead for Iveco Daily vans fitted with original IVEConnect media head units.
Adapter to add a reverse view camera to various Renault and Dacia vehicles with MEDIA Nav screen head units.
NOT Suitable for R Link 1 and R Link 2 systems
The camera input may need to be activated by a dealer.
This 28 pin OEM camera adapter cable allows you to add an aftermarket rear view camera to Toyota models with original Toyota Touch 2 systems.
This cable allows you to add an aftermarket back-up NTSC camera to the Mazda MZD connect original screen
suitable for various Mazda cars 2014 onwards with original 7" MZD Connect monitor
This cable allows you to add an aftermarket back-up NTSC camera to various Lexus cars (2012 Onwards) with GEN7/GEN8/GEN9 Media-Navigation Systems.
PLEASE NOTE: Only suitable for 59 pin and 16 pin connection
ES series cars of 2012-2018 MY are not supported!
Reverse camera to RGB video input interface for VW cars with RNS315, RNS510 or RCD510 original head units.
Only for NTSC camera's. CODING NEEDED BY VW ENGINEER WITH DIAGNOSTIC TOOL
Adapter harness to add a reverse camera to an original Volkswagen radio screen.
This harness has a built in interface to give ignition power and a reverse feed to the camera.
Note, camera input function needs to be CODED to the car by a VW dealer or a specialist engineer with VCDS.
Rear view NTSC camera interface for Mercedes Benz Vito and Viano vehicles fitted with original Audio 15 head units.
Includes plug and play harness
Front and rear view camera and video input interface for various Land Rover models with GVIF technology/ touch screen navigation version 1 and 1.1. This interface allows for rear-view camera input and two additional video sources.
PLEASE NOTE: Only suitable for vehicles with factory navigation
THIS INTERFACE ONLY WORKS WITH NAVIGATION SWITCHED ON
Rear view NTSC camera interface for Landrover Discovery 4 and Range Rover 2009-2012 with 2nd generation touch screen navigation
Also provides Video in Motion
Includes plug and play harness
Rear view camera interface for Landrover Discovery 4 (2012-2015) and Range Rover 2011-2015 with 3nd generation 8.2" touch screen navigation, and In Control Touch Pro
Also provides Video in Motion
Includes plug and play harness 16 pin Grey connector
Rear view camera interface for a single NTSC camera
Fo cars with 8" In Control Touch Pro screens. Only for model year 2015-06/2016
Includes plug and play harness QUADLOCK connector
Rear view camera interface for NTSC camera's.
Landrover, and Range Rover and Jaguar cars with 8" In Control Touch Pro screens. For model year late 2016 onwards
Includes plug and play harness QUADLOCK connector
Rear view camera input interface for BMW X5/X6 with CCC Navi or radio. Allows you to connect a rear-view camera to the CCC factory navigation system.
PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES
Reverse Camera input adaptor for Ford Sync 2 8 inch & Sync 3 Systems. Vehicle Coding required
Enables connection of a aftermarket backup camera to the original OEM system.
Rear view camera input interface for Chrysler, Dodge, Fiat, Lancia cars with Uconnect head units and seperate 8.4 inch monitors. Only compatible for cars with Uconnect 5 inch or 8.4/ RB5 and 8.4/ RE2 system monitors with 22 pin connector.
PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES
Rear view camera interface for the activation of the factory rear view camera input. Compatible with Dodge,Jeep and Fiat cars with Uconnect 5 inch or 8.4 inch systems with 52 pin connection.
PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES
This camera interface allows you to add an aftermarket camera to the original OEM head unit. Suitable for Land Rover/ Jaguar models with factory fitted Bosch head units with 8 inch display.
PLEASE NOTE: This interface requires inserting a PCB Board and dismantling the original head unit. This should only be carried out by professional car audio technicians!
This camera interface allows you to add an aftermarket camera to the original OEM head unit. Suitable for Land Rover/ Jaguar models with factory fitted Harmon head units with 8 inch display.
This interface allows you to add rear and front cameras to the OEM monitor of select VW and Audi group cars with MIB1 and MIB2 and Porsche cars with PCM 4.0. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.
This interface allows you to add A front/ rear view camera to the OEM monitor of Audi car models with original MMI, MMI Nav +, 4G MMI and MIB2 audio systems. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.
The adapter also has video inputs for external video sources connection such as an additional camera, DVD or Android TV boxes.
PLEASE NOTE: This interface requires hard wiring to the original head units main connector in order to generate the CANBUS. We recommend this be done by an experienced car audio technician
PLEASE CHECK THE COMPATIBLITY OF YOUR VEHICLE IN THE LONG DESCRIPTION
This interface allows you to add rear and front backup and parking cameras to the OEM monitor of an Audi car with MMI 3G or 3G+
It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.
PLEASE NOTE: This interface requires hard wiring to the Audi's climate control module in order to generate the CANBUS. Locations and connections can vary depending on the car model. Please refer to installation instructions for more info.
This interface allows you to add a rear and front camera to the OEM monitor of an Audi car without a MMI system. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.
This interface allows you to add a rear and front camera to the OEM monitor of a Mercedes car with original NTG5 audio system. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.
This interface allows you to add a rear view camera to the OEM monitor of a Mercedes car with original NTG5.0 or NTG 5.1 audio systems. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.
The adapter also has video inputs for external video sources connection such as an additional camera, DVD or Android TV boxes.
PLEASE NOTE: This interface requires hard wiring to the original head units main connector in order to generate the CANBUS. We recommend this be done by an experienced car audio technician
Locations and connections can vary depending on the car model. Please refer to installation instructions for more info.
This interface allows you to add a rear and front camera to the OEM monitor of a Mercedes car with Command APS NTG 4.5. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.
This interface allows you to add a rear view camera to the OEM monitor of a Mercedes car with original NTG 4.5 / Audio 20 audio systems. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.
PLEASE NOTE: This interface requires hard wiring to the original head units main connector in order to generate the CANBUS. We recommend this be done by an experienced car audio technician
Locations and connections can vary depending on the car model. Please refer to installation instructions for more info.
This camera interface allows you to add a rear and/or front camera to the OEM monitor of a Mercedes car with original NTG5.5 audio system. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.
Only suitable for Mercedes cars with original NTG 5.5 audio systems with either a 10.2 or 12.3 inch monitor
This interface allows you to add a rear and front camera to the OEM monitor of Peugeot and Citroen cars with SMEG navigation screens It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.
Add a rear parking camera to the Original screen on select Peugeot, Citroen and Opel vehicles with NAC high or low navigation Touch screen monitors. & and 8 inch models . Adds active parking lines and integrates with the cars parking sensors to provide a visual parking display. Has optional Front camera or DVR input.
Please note: This interface is designed for Citroen/ Peugeot made vehicles with a 7 or 8 inch NAC Touch screen
For 9 or 10 Inch NAC touch Screen, please use 27-563-10
Add a rear parking camera to the Original screen on select Peugeot and Citroen cars with NAC high or low navigation Touch screen monitors. Adds active parking lines and integrates with the cars parking sensors to provide a visual parking display. Has optional Front camera or DVR input.
Please note: This interface is designed for Citroen/ Peugeot vehicles with a 9 ,10 or 12 inch NAC Touch screen
For 7 or 8 Inch NAC touch Screen, please use 27-563
Front and rear view camera and video input interface for various Vauxhall models (2012 - 2013). This interface allows for rear-view camera input and two additional video sources.
Compatible with CD500, DVD600/800/900, CD600 Intellilink and DVD950 Intellilink infotainment systems.
PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES
Rear view camera and video input interface for various Vauxhall models 2016 onwards. This interface allows you to connect a rear-view camera and two additional video-sources to a factory-infotainment system.
Compatible for Vauxhall models with R4.0 IntelliLink systems.
PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES
Rear view camera and video input interface suitable for various Alfa Romeo, Citroen, Dodge and Fiat vehicles with Uconnect 5 VP2/ RA2 with DIN housing behind the front panel and 5 inch monitor . This interface allows you to connect a rear-view camera and two additional video-sources to a factory-infotainment system.
PLEASE NOTE: Only Suitable for Uconnect 5 VP2/RA2 systems with CD-drive and DIN-shell behind front-panel
This camera interface allows you to add a front and/or rear view camera to the existing OEM monitor. Suitable for BMW cars with EVO ID5/ID6 systems on a 6.5, 8.8 or 10.25 inch OEM monitor.
PLEASE CHECK LONG DESCRIPTION FOR FURTHER DETAILS
Rear-view camera input and video in motion interface for Porsche PCM3 and PCM3.1 navigation systems
Includes plug and play harness QUADLOCK connector
This interface allows you to add an aftermarket front and/or rear view camera to the factory infotainment system. Compatible with Porsche cars with PCM 3 and PCM 3.1 navigation systems.
This camera interface allows you to add a front and/or rear view camera to the existing OEM monitor. Suitable for select BMW cars with ID7/ MGU (Media Graphic Unit) iDrive systems on either a 10.2 or 12.3 inch screen.
PLEASE CHECK LONG DESCRIPTION FOR FURTHER DETAILS
This camera interface allows you to add a front and/or rear view camera to the existing OEM monitor. Suitable for Land Rover cars with dual screen systems (Touch Pro Duo)
PLEASE CHECK LONG DESCRIPTION FOR FURTHER DETAILS
Add camera (S) to OEM system on a select Mercedes vehicles (2019 Onwards) with MBUX NTG6 system with a 7 inch screen without satellite navigation
This interface can be used when adding front, rear and side view cameras to a 2019 onwards Mercedes with MBUX NTG6 such as Mercedes A-Class (W177), B-Class (W247), CLA-Coupe (C118), GLB (X247) and Sprinter(W907/910)
PLEASE NOTE: Only suitable for select Mercedes vehicles (2019 Onwards) with a 7 inch screen without satellite navigation and 31-pin connector
Add camera to Vauxhall cars with Navi 900 Intellilink Systems, with 8 inch touch monitor
This interface allows you to add a rear and front camera to the OEM monitor of a Mercedes A-Class with Command APS NTG 6 (7-inch screen)
This interface allows you to add a rear and front camera to the OEM monitor of a Mercedes A-Class with Command APS NTG 6 (10.25-inch screen)
This interface allows you to add rear and front backup and parking cameras to the OEM monitor of select Mercedes car models (WITH NTG 5.5/ NTG6 MBUX)
It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.
PLEASE NOTE: This interface requires hard wiring to the original head units main connector in order to generate the CANBUS. We recommend this be done by an experienced car audio technician
Locations and connections can vary depending on the car model. Please refer to installation instructions for more info.
This camera interface allows you to add a front and/or rear view camera to the existing OEM monitor/screen. Suitable for select Ford vehicles with original OEM SYNC 2.5 systems (7/8 inch screen)
PLEASE CHECK LONG DESCRIPTION FOR FURTHER DETAILS
This interface allows you to add rear and front backup and parking cameras to the OEM monitor on Audi TT (2015 Onwards) car models.
It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.
PLEASE NOTE: This interface requires hard wiring to the original head units main connector in order to generate the CANBUS. We recommend this be done by an experienced car audio technician
Please refer to installation instructions for more info.
Smartphone/ Camera integration for Audi A6/A7 (2012-2015) with MMI 3G+ Systems (WITH OEM 6.5 INCH SCREEN DISPLAY)
For later facelift models (2016-2018) with MMI 4G+ systems, please use 27-837
PLEASE NOTE: PLEASE READ LONG DESCRIPTION AND INSTRUCTIONS BEFORE PURCHASING!
Smartphone/ Camera integration for Audi A8 (2012-2017) with MMI High 3G System (7 INCH OEM screen)
PLEASE CHECK LONG DESCRIPTION
Smartphone/ Camera integration designed for Audi Q7 (2012-2015) with MMI 3G+ system (6.5 INCH OEM screen)
PLEASE CHECK LONG DESCRIPTION
Smartphone/ Camera integration for Audi Q3 (2014-2018) car models with MMI 3G LOW/ RMC Systems
PLEASE NOTE: This interface requires inserting a PCB Board to the original screen and dismantling the original Audi Radio. This should only be carried out by professional car audio technicians!
PLEASE READ LONG DESCRIPTION AND INSTRUCTIONS BEFORE PURCHASING!
Smartphone/ Camera integration for Audi A6/A7 (2016-2018) Facelift models with MMI 4G+ Systems (WITH OEM 8 INCH SCREEN DISPLAY)
PLEASE NOTE: PLEASE READ LONG DESCRIPTION AND INSTRUCTIONS BEFORE PURCHASING!
For earlier pre-facelift models with MMI 3G systems, please use 27-833
Smartphone/ Camera integration designed for Audi A1 (2013-2018) car models with MMI 3G systems.
PLEASE NOTE: This interface requires inserting a PCB Board to the original screen and dismantling the original Audi Radio. This should only be carried out by professional car audio technicians!
PLEASE CHECK LONG DESCRIPTION
Smartphone/ Camera integration for Audi Q3 (2014-2018) car models with MMI 3G+ High Systems (7 INCH SCREEN WITH NAVI)
PLEASE NOTE: This interface installation should only be carried out by professional car audio technicians or an individual with relevant car audio experience
PLEASE READ LONG DESCRIPTION AND INSTRUCTIONS BEFORE PURCHASING!
Smartphone/ Camera integration designed for Peugeot and Citroen cars with SMEG/MRN navigation systems.
Smartphone/ Camera integration for Peugeot and Citroen vehicles from 2016 onwards with NAC high or low navigation Touch screen monitors. Features include Carplay, Android Auto and screen mirroring.
PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES
Smartphone/ Camera integration designed for BMW cars with original NBT-EVO (ID5/ ID6) systems with 6.5/8.8/10.25" monitor and 6-pin LVDS connector.
PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES
AUDIO IS VIA THE CARS AUX IN SELECTION. The USB can be converted using 24-040 or AUX can be activated by a Mercedes specialist dealer
Smartphone/ Camera integration designed for Mercedes with NTG 4.5 and 4.7 OEM system 2012-2015
PLEASE CHECK LONG DESCRIPTION
This universal smartphone integration interface allows you to connect your smartphone device to an OEM/ aftermarket radio or monitor. This interface adapter fits any screen/monitor with CVBS/ HDMI input and can be operated by the external knob controller that is provided. This interface supports both wireless and wired Carplay/ Android Auto and Screen mirroring via a USB connection
PLEASE NOTE: PLEASE READ FULL DESCRIPTION BELOW BEFORE PURCHASING
Wireless functions vary depending on phone models. Please check with your phone manufacturer to confirm compatibility.
PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES
PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES
V.Logic V5 front and rear view camera interface suitable for BMW F-Series models (8 Button I-Drive) with navigation system or radio PNP (Plug and Play Harnesses) and 7" or 10.2" on board monitor with 4 pin HSD LVDS connector.
PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES
V.Logic V5 front and rear view camera interface suitable for BMW F-Series models (2012-2016) with NBT navigation systems or radios with 6.5",7",8.8" or 10.25"on board monitor with 4+2 pin HSD2 LVDS connector.
PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES