5m speaker iso cable extension cable. 8 way brown connector.

2.5m speaker ISO cable extension cable. 8 way brown connector.

5m Power iso cable extension cable. 8 way black connector.

2.5m Power ISO cable extension cable. 8 way black connector.

NAVAMP is special interface designed to allow audio from a portable navigation device with audio outputs to play through the cars’ original speakers.

The interface uses a mute relay and integrated amplifier to automatically cut audio from the head unit to the front speakers and allow the portable navigation audio to play through the front speakers.

NAVAMP is special interface designed to allow audio from a factory fitted separate navigation device with audio outputs to play through the cars’ original speakers when replacing the original head unit.

The interface uses a mute relay and integrated amplifier to automatically cut audio from the new head unit to the front speakers and allow the original navigation audio to play through the front speakers.

24volt to 12 Volt converter wired with iso power connector.
Suitable for car audio and handsfree equipment

Converts 12V DC to 6V DC to provide a suitable power supply to a cars original parking camera.

Dual 2.1 Amp USB panel mount charging socket.

Universal vertical mount, ideal for handsfree car kit displays. Sticks to the cars dashboard. The mount is adjustable for the best display angle.

Universal horizontal fixing swivel mount with  flexible adhesive base.

Female ISO connectors to bare wires, speakers and power.

Cable for connecting the car to the  ISO connectors on a European car radio.
The harness has bullet terminals on the permanent and ignition wires so they can be easily swapped.

Male to female ISO connectors for connecting a European car radio to cars with ISO style connectors.

Aerial adapter DIN crimp plug

Pack of 10 Aerial adapter DIN crimp plug

Aerial adapter DIN solder plug

For replacing the DIN aerial adapter

Adjustable 2 channel line output converter with built in amplifier remote trigger.
Converts 2 channels of speaker level audio to 2 channels of line level audio.

Bulk pack of ten adjustable 2 channel line output converter with built in amplifier remote trigger.
Converts 2 channels of speaker level audio to 2 channels of line level audio.

USB panel mount charging socket. Suitable for 12V and 24V vehicles.

Mini USB female to USB male adapter

Commonly used to retain original USB when fitting an aftermarket head unit.

This AUX to USB audio adapter allows you to stream external audio to OEM stereo via the factory USB port.

Hard wired universal FM modulator interface to add an aux in to a cars existing FM radio system.

Universal CANBUS interface providing  a single output.
This device provides a default IGNITION out for cars listed but can be programmed to change the dfault to  Illumination, Speed pulse, Reverse gear or Handbrake.

Universal CANBUS interface providing  two outputs.
This default output on this device is IGNITION & SPEED pluse but is can be programmed to change to , Illumination,  Reverse gear or Handbrake or on selected vehicles amplifier wake up and parking sensor recovery.

Male power and speaker connectors to bare wire.
Commonly used to repair an original wiring harness in a car.

Male power and speaker connectors to wires with bullet terminals.
Commonly used to repair an original wiring harness in a car.

Bulk bag of 10 pieces gold plated splice for joing two male phono cables together

Packs of 10 pieces gold plated splice for joining two female phono cables together, or converting a female socket to a male.

Panel clips normally found on the back of original car audio facias.
10 pcs per pack

M5 x 60mm  male threaded bolts  for use as extra long radio support bolts. 
These bolt screw into the back of the standard Din or Double Din radio. They then help support the new radio by locating into the OEM support slot in the car
10 pcs per pack

Pack of 10 perforated galvanised metal strips. Ideal for use when custom mounting devices or units into cars.

Momentary panel mount rocker switch. Push and hold to activate the switch, springs back to original position on release. 19mm hole diameter.

ON/OFF panel mount toggle rocker switch. 19mm hole diameter.

8-16V buzzer sounder.
No external oscillation circuit is required.

12V power socket to bare ends.
Use for hard wiring accessory items such as SAT navs and charging cradles behind the dashboard.

Bulk pack of ten 12V power socket to bare ends.
Use for hard wiring accessory items such as SAT navs and charging cradles behind the dashboard.

Microphone for use with handsfree kits and after market head units with a 2.5mm jack mic connector

Microphone for use with handsfree kits and after market head units with a 3.5mm jack mic connector