RunSwitch 7.5 Amp Power Module
The RunSwitch creates a simple, cost effective accessory output, reducing installation times and eliminating potential damage to vehicle parts and components.
This device connects to the battery or any 12-volt constant circuit providing easy access to an accessory power source without having to tap into sensitive vehicle wiring.
An internal LED fuse illuminates when power is activated allowing for quick and easy set-up, functional circuit confirmation and diagnostics.
Due to its compact size, it can be connected and then discreetly hidden away.
In the event more current is needed RunSwitch can trigger one or multiple relays.
RunSwitch Plus 7.5 Amp Programmable Power Module
RunSwitch Plus combines the functionality of RunSwitch with two added features – a Timer mode that extends power to accessories for up to 90 minutes after the engine is turned off and a Battery Saver mode that disconnects power to the accessory when the battery level is low ensuring the battery will not fully drain. Timer Mode is ideal for mimicking CAN BUS shut down times and creating a retained accessory power (RAP) circuit. Ideal for lighting, DVR cameras, audio systems, console accessories, sunroofs, trolling motors and many more.
For filtering 12 volt car audio products that have induced noise from alternators and other ignition sources
10 AMP
For filtering 12 volt car audio products that have induced noise from alternators and other ignition sources
30 AMP
For Filtering 12 Volt Car Audio Products That Have Induced Noise From Alternators And Other Ignition Sources.
Converts 12V DC to 6V DC to provide a suitable power supply to a cars original parking camera.
PLEASE NOTE: This is not a camera interface. If you are looking to add or retain a camera please visit our car specific camera interface range
Dual 2.1 Amp USB panel mount charging socket.
Female ISO Lead harness (with Butt Connectors)
Allows you to connect bare Power and speaker wires to the Female ISO connector.
Useful for repairs and custom installs
ISO extension harness with switch on 80cm extension for manually switching on radio without having the vehicles ignition on. Commonly used on camper vans and motor homes.
Suitable for almost any vehicle with a permanent 12v feed to the radio using standard ISO connections.
A 2 Channel 80W adjustable high-to-low level subwoofer amplifier Line Output Converter (LOC) with a built-in amplifier remote trigger. This device is designed to convert 2 channels of speaker level audio into 2 channels of line level audio that can be used by car audio amplifiers.
This interface detects an audio signal and generates an amplifier turn on signal based on this, the amplifier turn on signal stays on for 60 seconds after the audio signal disappears. This allows the amplifier to stay turned on between tracks and during moments of silent audio.
Tweeter Filter/ Capacitor (PAIR)
4.7 UF
63V
Approximate Crossover Power - 8.4 KHZ
Mini USB female to USB male adapter
Commonly used to retain original USB when fitting an aftermarket head unit.
Hard wired universal FM modulator interface to add an aux in to a cars existing FM radio system.
A bulk pack 10 Male to Female Right Angled RCA phono Adapters (5 Red - 5 Black)
Set at a 90 Degree angle, making them perfect for use In tight installation places
Mini ANL fuse holder gold plated (6-20mm2)
For cable protection of 6-20 mm² and a current of 10-150 A.
Note: Please use wire end sleeves for protection to protect the cable strands and for better contact
Bulk pack of 5 Interior windscreen glass mount DAB radio antenna aerials suitable for aftermarket DAB car radios.
Consists of a 3m cable terminated with female SMB right angle connector and a 'sticky-back' peel to easily stick to the vehicles windscreen.
Tesa PVC electrical insulation tape 33m (Black)
Black 33m x 19mm Tesa Insulation tape.
Thickness 0.12mm
PLEASE NOTE: For a bulk pack of 8, please use 80-002B
8 Rolls of Tesa PVC electrical insulation tape 33m (Black)
Black 33m x 19mm Tesa Insulation tape.
Thickness 0.12mm
1 roll of TESA Black PET Fleece cloth electrical harness tape (20mm x 25m)
- Tearable by hand eliminating the need for cutting tools
- Noise dampening ideal for noise prevention
- Rip resistant and highly durable
- Age resistant for a long lasting fastening
- Strong adhesion suitable for a variety of environments
PLEASE NOTE: For a bulk pack of 8, please use 80-006B
8 rolls of TESA Black PET Fleece cloth electrical harness tape (20mm x 25m)
- Tearable by hand eliminating the need for cutting tools
- Noise dampening ideal for noise prevention
- Rip resistant and highly durable
- Age resistant for a long lasting fastening
- Strong adhesion suitable for a variety of environments
Pack of 10 perforated galvanised metal strips. Ideal for use when custom mounting devices or units into cars.
Momentary panel mount rocker switch. Push and hold to activate the switch, springs back to original position on release. 19mm hole diameter.
ON/OFF panel mount toggle rocker switch. 19mm hole diameter.
8-16V buzzer sounder.
No external oscillation circuit is required.
Ideal for -12V GROUND cable on active under-seat sub-woofer boxes
30m roll of automotive spec thinwall cable.
44/03 copper BLACK
3.0mm2 , 40 amp
Transparent loudspeaker cable with highly flexible strand construction and easily separable wires.
Cross section: 2 x 1.5mm2 (15-16AWG)
Colour: Transparent with blue wire identification, without imprint
strand construction: 80*0,155
Roll length: 150 m
Coil diameter: 220 mm
Spool width: 90mm
These packs of 10 water resistant ATC/ATO 10/15 AMP Inline Fuse Holders are great for hardwiring accessories into the fuse box.
Made with heavy duty 16 AWG wire and a tight-fitting water resistant lid, these holders are great for locating fuses in areas where dust, moisture or water ingress could cause problems, meaning they can withstand the harshest of environments both off-road and offshore.
Easily install additional circuits without the need for splicing and cutting cables with our packs of 10 Blade fuse tap spurs
Replace a fuse in the fuse box with this Fuse link T Tap to give you an extra fused spur to supply an accessory device.
Can be used with our 10 Amp Red standard ATO blade fuses (83-310) and 20 Amp Yellow (83-320)
Easily install additional circuits without the need for splicing and cutting cables with our packs of 10 Blade fuse tap spurs
Replace a fuse in the fuse box with this Fuse link T Tap to give you an extra fused spur to supply an accessory device.
Easily install additional circuits without the need for splicing and cutting cables with our packs of 10 Blade fuse tap spurs.
Replace a fuse in the fuse box with this Fuse link T Tap to give you an extra fused spur to supply an accessory device.
These can be used with our 10 Amp (83-510) and 20 Amp (83-520) Mini ACN blade fuses
Easily install additional circuits without the need for splicing and cutting cables with our packs of 10 Blade (MICRO 2) fuse tap spurs
Replace a fuse in the fuse box with this Fuse link T Tap to give you an extra fused spur to supply an accessory device.
Can be used with our 10 Amp Red (83-610) and 20 Amp Yellow (83-620) ACZ (Micro 2) blade fuses
High-quality Mini ANL and ATC Fuse holder for 20mm ² cable.
Make replacing fuses in the field a quick and simple process with these high-quality dual Mini ANL and ATC fuse holders.
The Water resistant cover combined with the silicone grommet and gasket means they can withstand the harsh conditions of offshore and off-road environments, making them ideal for use in water sports and marine audio systems.
The holders are capable of fitting 20mm² cable and can handle up to 150 Amp fuses. Easily secure fuses and cables with the included Allen key, making for a more flexible and secure installation.
Make replacing fuses in the field a quick and simple process with these high-quality dual ATC fuse holders.
The Water resistant cover combined with the silicone grommet and gasket means they can withstand the harsh conditions of offshore and off-road environments, making them ideal for use in water sports and marine audio systems.
The holders are capable of fitting 6,8 and 10 AWG wire and can handle up to 80 Amp fuses. Easily secure fuses and cables with the included Allen key, making for a more flexible and secure installation.
10 amp standard (ATO, ATC, APR) blade automotive fuse
RED
100 pcs per pack
Can be used with our ATO ATC dual-slot blade fuse holder (83-225) or (83-225-10)
20 amp standard (ATO, ATC, APR) blade automotive fuse
YELLOW
100 pcs per pack
Can be used with our ATO ATC dual-slot blade fuse holder (83-225) or (83-225-10)
10 amp mini (APM, ATM) blade automotive fuse
RED
100 pcs per pack
These work with our MINI ATS BLADE Fuse Holder (83-226) or (83-226-10)
20 amp mini ATS blade automotive fuse
YELLOW
100 pieces per pack
These work with our MINI ATS BLADE Fuse Holder (83-226) or (83-226-10)
10 amp mini (ACN) blade automotive fuse
RED
100 pcs per pack
Can be used with our MINI ACN blade fuse holder tap spur (83-227) or (83-227-10)
20 Amp mini (ACN) blade automotive fuse
YELLOW
10 pcs per pack
Can be used with our MINI ACN blade fuse holder tap spur (83-227) or (83-227-10)
20 Amp mini (ACN) blade automotive fuse
YELLOW
100 pcs per pack
Can be used with our MINI ACN blade fuse holder tap spur (83-227) or (83-227-10)
10 Amp Red ACZ (Micro 2) blade fuses (10pcs pack)
RED
10 pcs per pack
Can be used with our ACZ (Micro 2) blade fuse holder tap spur (83-228-10)
10 Amp Red ACZ (Micro 2) blade fuses (100pcs pack)
RED
100 pcs per pack
Can be used with our ACZ (Micro 2) blade fuse holder tap spur (83-228-10)
20 Amp Yellow ACZ (Micro 2) blade fuses (10pcs pack)
YELLOW
10 pcs per pack
Can be used with our ACZ (Micro 2) blade fuse holder tap spur (83-228-10)
20 Amp Yellow ACZ (Micro 2) blade fuses (100pcs pack)
YELLOW
100 pcs per pack
Can be used with our ACZ (Micro 2) blade fuse holder tap spur (83-228-10)
Professional sound deadening roller tool
1 Metre (100cm) MOST fibre optic extension cable
Can be used as a single-line optical cable for retrofitting and repair work in the MOST bus area, usually to extend or relocate devices on a fibre optic network.
Male to Female connector
1 Metre (100cm) MOST fibre optic extension cable
Can be used as a single-line optical cable for retrofitting and repair work in the MOST bus area, usually to extend or relocate devices on a fibre optic network.
Male to Male connector
2 Metre (200cm) MOST fibre optic extension cable
Can be used as a single-line optical cable for retrofitting and repair work in the MOST bus area, usually to extend or relocate devices on a fibre optic network.
Male to Female connector
Camera 4 PIN Power Cable (6 metres)
Can be used with a variety of cameras from our InCarTec range.
Female 4 pin connector
Male Yellow RCA
Car Backup Reverse Camera 4-Pin Male To CVBS RCA Female Connector
Microphone for use with handsfree kits and after market head units with a 3.5mm jack mic connector
3.5mm Jack Mono Headphone/Microphone Extension Cable Lead, Black - 5m
Mono Right angled Male 3.5mm Jack to female 3.5mm socket
Made from high quality material
3.5mm Jack Headphone/Mic Extension Cable Lead
Car Audio Battery / Power cable.
4 AWG 20 Meter roll.
Black
Car Audio Battery / Power Cable 8 AWG
50 Meter Roll - Black
Car Audio Battery / Power cable 8 AWG.
50 Meter Roll - Red
50M roll of car audio speaker cable
Black/ Blue Colour
14 AWG
OFC Copper
Multicore speaker cable
1mm2 (18 AWG) Color Coded Car Speaker Cable.
Eight Speaker Leads and one Remote Turn-on Lead
Easy Peel Jacket without Cutting Through Inner Wire Jacket.
EIA Standard Color-coded for Quick and Easy Installation
High-Strand for Increased Sound Transfer
6 Metre Length is Ideal for 4-Speaker to Amplifier Installation
Save Installation Time - Only One Cable to Run.Ultra-Flex Outer Jacket for Maximum Flexibility
Length: 6 Metres