Chrysler

This cable can be used in place of the standard ISO mute relay that is supplied with Bluetooth and standard Handsfree car kits.
Can also be used in conjunction with a car specific lead to convert the audio to low level signal as required by BOSE or Infinity style amplifiers.

Designed for Parrot MKi but can also be used with CK3100 by using the cable adapter provided.

For Chrysler/ Jeep models with 2 x 7 way connectors made before 2002.

For Chrysler, Dodge and Jeep car models (2002 > 2008) with 22 pin connector and standard audio systems.

NOT SUITABLE for models with Boston Sound system.

22 Pin connector has 4 larger pins at one end and 2 larger pins at the other end.

22 Pin Cable for Chrysler, Dodge and Jeep vehicles after 2002 with BOSTON ACOUSTIC sound systems.

22 Pin connector has 4 larger pins at one end and 2 larger pins at the other end.

Chrysler, Dodge and Jeep Hands-free ISO cable for newer style radio connectors.
This newer connector  has 22 pins with a single larger pin at either end of the housing.
This cable is for car models built after 2007. Suitable for cars using basic audio or by combining it with item 10-400 it can be used with amplified audio systems.

For Chrylser/ Dodge cars  made after 2008 fitted with the 9 speaker premium audio sound system. These cars have an amplifier situated in the rear near side panel.

An extension cable is needed with this lead.

Chrysler Jeep audio connector to ISO for European after-market car radios.
Non amplified cars

Cable to connect Chrysler, Dodge, Jeep car  to an after market European car radio with ISO style connectors. (use for cars without OEM amplifiers and without Steering wheel controls)
Use 29-630 for cars with steering controls.

Cable to connect Chrysler Jeep car with Boston Acoustics to an after market European car radio with ISO style connectors.

Cable to connect Chrysler Jeep & Dodge cars made after 2007 with new style radio connector to after-market European car radios with ISO style connectors.

Chrysler, Jeep  Active amplifier converter to ISO connectors for  a European after-market car radio.
4 channel adjustable 

Amplifier bypass cable. Allows you to connect a new aftermarket radio directly to the cars speakers after bypassing the original amplifier.
Commander (05-09), Compass (07-09), Grand Cherokee (05-08) Patriot (06-09)
Grand Voyager (05-08) Voyager (04-07) 300C (04-07)

Amplifier bypass cable for cars made after 2009. Allows you to connect a new after-market car radio directly to the cars speakers.
Includes crossovers.

Aerial adapter  DIN to ISO.
cable for Ford & Japanese cars that have a Din original style antenna cable.
Also use to convert any Din cable to ISO.

Fakra antenna cable adapter for cars with non-amplified antennas and single fakra style connectors.
Suits BMW, VW

Antenna cable adapter for Chrysler, Dodge, Jeep & Ford USA (07>), Chevrolet (06>) cars with non-amplified antennas.

Antenna cable adapter for Chrysler, Dodge, Jeep & Ford USA (07>), Chevrolet (06>) cars with non-amplified antennas.

Fakra to DIN antenna adapter cable with 12v phantom power.

This antenna adapter cable adapts from the original Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade.

This interface will turn on the amplifier for vehicles with J1850 Amplifier turn on signals  Voyager 05-08  and Dodge RAM 02-05.

For steering controls use 29-630-ISO iin addition 

Amplifier turn on allowing you to retain the use of the OEM amplifier in select Chrysler/Dodge and Jeep vehicles, when replacing the OEM head unit with an aftermarket radio.

Chrysler VES detention cable
Use this cable to retain rear screen & VES DVD operation for select Chrysler /Dodge/Jeep vehicles when replacing the factory radio .
or when adding monitors to the factory system.

This lead needs to be used with interface 23-233 to retain the use of the original entertainment system.

Hard wired universal FM modulator interface to add an aux in to a cars existing FM radio system.

Universal CANBUS interface providing  a single output.
This device provides a default IGNITION out for cars listed but can be programmed to change the dfault to  Illumination, Speed pulse, Reverse gear or Handbrake.

Universal CANBUS interface providing  two outputs.
This default output on this device is IGNITION & SPEED pluse but is can be programmed to change to , Illumination,  Reverse gear or Handbrake or on selected vehicles amplifier wake up and parking sensor recovery.

iPhone  lightning to USB A charger and data cable

FLEXIBLE METAL JACKET

Micro USB to USB a male charger/data cable 1m

FLEXIBLE METAL JACKET 

Rear view camera input interface for Chrysler, Dodge, Fiat, Lancia cars with Uconnect head units and seperate 8.4 inch monitors. Only compatible for cars with Uconnect 5 inch or 8.4/ RB5 and 8.4/ RE2 system monitors with 22 pin connector. 

PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES 

Use this patch lead with programable aftermarket Chinese branded stereo such as Xtrons, Eonon, Pumpkin, Joying etc. that have KEY 1 and KEY GROUND 

Adapter cable to pair an InCarTec 29-6XX  series steering wheel remote control interface

Adapter cable to pair an InCarTec 29-6XX or a 29-7XX series steering wheel remote control interface to an aftermarket Alpine stereo.

old style Blaupunkt patch lead to be used with In Car Tec 29 series steering wheel controls.

Adapter cable to pair an InCarTec 29-6XX or a 29-7XX series steering wheel remote control interface to an aftermarket Clarion stereo.

Adapter cable to pair an InCarTec 29-6XX or a 29-7XX series steering wheel remote control interface to an aftermarket JVC stereo.

Adapter cable to pair an InCarTec 29-6XX or a 29-7XX series steering wheel remote control interface to an aftermarket Kenwood stereo.

Pioneer patch lead to be used with an In Car Tec 29-6xx or 29-7xx series steering wheel control interfaces.

Adapter cable to pair an InCarTec 29-6XX or a 29-7XX series steering wheel remote control interface to an aftermarket Sony stereo.

ZENEC patch lead to be used with In Car Tec 29 series steering wheel controls

PHILIPS patch lead to be used with In Car Tec 29 series steering wheel controls

This patch lead gives out a fixed voltage between the tip and base of the 3.5mm jack plug. Use with self learning programable aftermarket units like Blaupunkt. Also for Kenwood, Sony units using their "CUSTOM" setting for steering control input

Only to be used with In Car Tec 29 series steering wheel control interfaces.

NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.

For Chrysler and Jeep cars made before 2007 this  interface with ISO cables allows use of original buttons with a new aftermarket head-unit.

A SINGLE WIRE NEEDS CONNECTING UNDERNEATH THE CARS STEERING COWLING

NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.

Chrysler Voyager  Car Audio Steering wheel interface with ISO connectors, to be used in conjunction with an amplifier turn on interface 23-211 .

A WIRE NEEDS CONNECTING UNDER THE STEERING COWLING

UNICAN universal steering wheel control interface for cars with CANbus controlled steering wheel controls.

Also provides CANbus outputs such as ignition, illumination, speed pulse, handbrake and reverse gear.

PROFESSIONAL FIT ONLY. This interface is not recommended for DIY installation.

CANbus steering control and Amplifier Turn On interface for Chrysler, Dodge and Jeep vehicles.

Switches on the original amplifier, retains the use of the steering wheel controls and give speed pulse, handbrake and reverse gear CAN outputs.

CANbus steering control and Amplifier Turn On interface for Chrysler, Dodge and Jeep vehicles.

Switches on the original amplifier, retains the use of the steering wheel controls and give speed pulse, handbrake and reverse gear CAN outputs.

Patch lead for the UNICAN range of steering control interfaces for Chinese head units and head units with loose wire learning SWC input

Alpine specific patch cable to connect a Unican interface to the the jack SWC socket on the back of the head-unit

Specific patch cable to connect a Unican interface to the the jack SWC socket on the back of the head-unit.
For JVC and Clarion car radios

Specific patch cable to connect a Unican interface to the SWC socket on the back of the head-unit.
For Kenwood car radios with either a mini Din plug or a single wire connection.

Specific patch cable to connect a Unican interface to the  SWC socket on the back of the head-unit.
For Pioneer / Sony car radios with either a mini Din plug or a single wire connection.

THIS IS NOT A DIY PRODUCT .It should only be fitted be experienced 12V engineers.

CANbus interface for various Alfa Romeo and Fiat vehicles  with ISO connectors behind the radio to retain the use of the steering wheel controls and provide CANbus outputs. Stops original display flashing once the correct settings have been made.

Chrysler doors for 165mm speakers.
These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.

Replacement car audio fascia to enable you to change the original radio in the car to a single DIN after market version
Fits Chrysler, Dodge, Jeep (Before 2001) car models

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a single DIN after market version
Fits Chrysler, Dodge, Jeep (2000-2005) car models

COLOUR: MATT BLACK

Replacement car audio facia to enable you to change the original radio in the car to a single or double DIN aftermarket unit.

Fits Chrysler, Jeep & Dodge

COLOUR: MATT BLACK

Replacement car audio facia to enable you to change the original radio in the car to a single DIN aftermarket version
Fits various Chrysler, Dodge and Jeep (2007 onwards) vehicles

COLOUR: MATT BLACK

Car radio fascia adapter panel to allow the fitting of an aftermarket double din car stereo upgrade.

This facia consists of two side panels that are screwed on to the sides of the body of the new Head-unit 

Fits Chrysler 300C, Grand Voyager and Sebring car models

COLOUR: MATT BLACK

Replacement car audio facia to enable you to change the original radio in the car to a single and double DIN aftermarket version

Fits Chrysler 300C 1st Gen (2005-2007) car models WITHOUT THE ORIGINAL NAVIGATION SYSTEM

COLOUR: MATT BLACK

PLEASE NOTE: If the car has original Navigation use item code 50-304

Some models may have extra rear windscreen wiper buttons above the hazard button. For these cars it will be necessary to trim away part of this fascia to accommodate the wiper buttons.

Replacement car audio facia to enable you to change the original radio in the car to a Double DIN aftermarket version

172mm x 98mm

This facia includes side fixing brackets so no fitting cage is required 

Fits Chrysler PT Cruiser (2006-2010) and Jeep Grand Cherokee (2005-2007) car models

COLOUR: MATT BLACK

PLEASE NOTE: This fascia kit comes with a cutting template, the original dashboard needs to be cut to allow the fitting of a Double DIN unit

Internal  windscreen mount DAB radio antenna suitable for aftermarket  DAB radios

3m cable terminated with female SMB right angle connector .3db signal gain

Hi-efficiency 2ohm pair of speakers.
2 way system of 16cm woofer and 20mm tweeter with crossover.
in-line 6 dB/oct cross-over adjustable tweeter level : 0 dB or -3 dB

Universal Butterfly bracket camera with adjustable bracket
Angled down  
Waterproof 
12v    NTSC
Colour CMOS OV7959 quality
includes 5m Phono cable and 1.5m power cable

Includes reference lines option

Complete base plate for numberplate with built in camera. 
Adjustable angle  
Waterproof 
12v 
Colour CMOS OV7959 lens
includes power & phono cable

Universal bracket fix 
Angled down  
Waterproof 
12v 
Colour CMOS OV7960 quality
includes Phono cable

Includes reference lines option

Universal Push fit, Angled downwards  NTSC format
Diameter 25.4mm 
Waterproof 
12v feed needed . Camera has with inbuilt 6v adapter
Colour CMOS lens
Includes  reference lines option

Universal METAL BODY  underhang rearview camera 
with fixed screw thread

Includes options for  Parking lines or Mirror image so can be used as a front view camera

metal body  170° back up camera  NTSC, Parking lines on/off

Universal rear view camera and monitor kit.

Complete fitting kit solution to install an after market single or double din unit into Chrysler, Dodge or Jeep vehicles.

Kit contents

- Single and double din fascia (50-304)

- Steering control and amplifier retention interface (29-UC-050-CHR1)

- Antenna adapter (21-108)

Complete fitting kit solution to install an after market single or double din unit into Chrysler, Dodge or Jeep vehicles.

This kit comes complete with Pioneer SPH-DA230DAB double din stereo head-unit with Car Play and Android Auto.

This complete fitting kit includes the following:

- Single and double din fascia

- Steering control and amplifier retention interface

- Pioneer patch lead

- Antenna adapter

- Pioneer SPH-DA230DAB double din stereo head-unit

- DAB internal windscreen active antenna

Complete fitting kit solution to install an after market double din unit into Chrysler, Dodge or Jeep vehicles.

 Kit contents
-Double din fascia
-Steering control and amplifier retention interface
-Antenna adapter.

NOTE: An additional patch lead is required for the steering controls.

Replacement rear view mirror with a built in monitor for reverse camera and video input.
When not using the video input the mirror works as normal.
An additional mounting adapter is needed.

Replacement rear view mirror with a built in monitor for reverse camera and video input.
When not using the video input the mirror works as normal.
This monitor comes with a universal window mount (M-K06) which securely attaches the monitor to the vehicles windscreen

7 inch Rear view clip over mirror monitor
2 way  video inputs
operated by touch or remote control

Clip over rear view mirror monitor for reverse came display.
5 inch display screen.

5 inch monitor with suction mount bracket. Ideal for reverse camera use. NTSC /PAL autoswitch

Rear view window mount Monitor designed to fit instead of the rear view mirror in panel vans. A self adhesive fixing pad is attached to the windscreen and then the monitor is attached to this.

Includes a cable cover. 2 video inputs. NTSC/PAL auto switch

Although we may have cables to fit the Double Din unit to your car there is either no facia conversion kit available, it is impossible to do or you will need professional engineers to adapt your dashboard.

Although we may have cables to fit the Single Din unit to your car there is no facia needed.

As this car has ISO connectors as standard you do not need an adapter  cable as it should have been supplied with the car radio that you bought.

If its missing check our Products by Group for Audio- Spare cables.

If your car has steering controls select one of the interfaces shown

As this car has ISO connectors as standard you do not need an adapter T cable as it should have been supplied with the hands-free kit

Skins expert sound deadening
7 x sheets 0.27m x 0.38m
Multilayer vibration dampening. Aluminium foil, polymer layer on butyl rubber base.
3.0 mm Silver self adhesive

There are several option for audio fittings for the Voyager and Grand Voyager.

This information is here to help.