Please find our all of our Mini fitting parts listed below: Car audio cables, parking sensor interfaces, steering wheel control cables, amplifier intergration & bypass cables, antenna adapters, speaker rings, reversing & rear view cameras, fascias, and full stereo upgrade kits
Return to all Mini cars17 pin BMWISO hands-free T harness . Also fits Rover and Landrover models made between 2000 and 2003 with BMW wiring connectors For use with Handsfree car kits that have ISO Mute cables.
BMW Quadlock to ISO T cable for cars 2005 onwards without Ignition supply in the radio connector.
This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit.
BMW Quadlock to ISO T cable for cars 2005 onwards.. Complete with CAN ignition feed for easy plug and play operation
This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit.
Special relay to mute audio when reversing to allow parking tones to be heard clearly.
This relay is designed for aftermarket radio fittings where a parking sensor retention interface has been fitted.
This relay will use a positive reverse gear signal to mute the new head unit, so when the car is reversing the radio is silent and the parking tone interface can be heard clearly.
Car radio adapter cable for converting BMW style 17 pin connector to ISO connectors suitable for European after-market car radio's connectors.
BMW Quadlock to ISO connectors for connecting a car to an aftermarket car radio.
Use for cars without steering wheel controls
Aerial adapter DIN to ISO.
cable for Ford & Japanese cars that have a Din original style antenna cable.
Also use to convert any Din cable to ISO.
Hard wired universal FM modulator interface to add an aux in to a cars existing FM radio system.
Universal CANBUS interface providing a single output.
This device provides a default IGNITION out for cars listed but can be programmed to change the dfault to Illumination, Speed pulse, Reverse gear or Handbrake.
Universal CANBUS interface providing two outputs.
This default output on this device is IGNITION & SPEED pluse but is can be programmed to change to , Illumination, Reverse gear or Handbrake or on selected vehicles amplifier wake up and parking sensor recovery.
CANbus interface to retain the original parking distance control (PDC) tones. (Front and Rear) and other vehicle warning chimes that are lost when replacing the radio in various BMW, Mini, Citroen, Peugeot, Volvo and Ford cars.
iPhone lightning to USB A charger and data cable
FLEXIBLE METAL JACKET
Micro USB to USB a male charger/data cable 1m
FLEXIBLE METAL JACKET
This camera interface allows you to add a front and/or rear view camera to the existing OEM monitor. Suitable for BMW cars with NBT Navigation on a 6.5, 8.8 or 10.25 inch OEM monitor.
PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES
Smartphone/ Camera integration for BMW with CIC systems.
PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES
Use this patch lead with programable aftermarket Chinese branded stereo such as Xtrons, Eonon, Pumpkin, Joying etc. that have KEY 1 and KEY GROUND
Adapter cable to pair an InCarTec 29-6XX series steering wheel remote control interface
Adapter cable to pair an InCarTec 29-6XX or a 29-7XX series steering wheel remote control interface to an aftermarket Alpine stereo.
Adapter cable to pair an InCarTec 29-6XX or a 29-7XX series steering wheel remote control interface to an aftermarket Clarion stereo.
Adapter cable to pair an InCarTec 29-6XX or a 29-7XX series steering wheel remote control interface to an aftermarket JVC stereo.
Adapter cable to pair an InCarTec 29-6XX or a 29-7XX series steering wheel remote control interface to an aftermarket Kenwood stereo.
Pioneer patch lead to be used with an In Car Tec 29-6xx or 29-7xx series steering wheel control interfaces.
Adapter cable to pair an InCarTec 29-6XX or a 29-7XX series steering wheel remote control interface to an aftermarket Sony stereo.
ZENEC patch lead to be used with In Car Tec 29 series steering wheel controls
PHILIPS patch lead to be used with In Car Tec 29 series steering wheel controls
NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.
Steering wheel control interface with built in Harman/Kardon enabler for pre 2006 model Mini cars.
Retains the use of both the steering wheel control, including telephone buttons, and the Harman/Kardon original amplifier.
This lead is plug and play.
BMW/ Mini (2000 Onwards) Front door speaker adapter panels for 130mm speakers.
These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.
Front door for 165mm speakers.
These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.
BMW cars
Used connect the original connector in the car to a pair of aftermarket speakers.
Adapter lead to pair an InCarTec 49- series steering wheel control interface to an aftermarket Chinese, Xtrons, Eonon or unbranded stereo.
Adapter lead to pair an InCarTec 49- series steering wheel control interface to an aftermarket Alpine stereo.
Adapter lead to pair an InCarTec 49- series steering wheel control interface to an aftermarket Clarion stereo.
Adapter lead to pair an InCarTec 49- series steering wheel control interface to an aftermarket JVC stereo with a 3.5mm jack steering control input.
Adapter lead to pair an InCarTec 49- series steering wheel control interface to an aftermarket JVC stereo with a single wire steering control input.
Adapter lead to pair an InCarTec 49- series steering wheel control interface to an aftermarket Kenwood stereo.
Adapter lead to pair an InCarTec 49- series steering wheel control interface to an aftermarket Sony stereo.
Universal patch lead to be used with In car Tec 49 series steering wheel control interfaces.
Use for Alpine, Clarion, JVC, Kenwood, Pioneer and Sony head units.
NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.
BMW 17 pin round pin steering wheel control interface.
Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.
NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.
BMW Car Audio Steering wheel interface and ISO adapter cable allowing use of original buttons with a new aftermarket head-unit.
For cars with K Bus data and Quadlock connector.
Also fits Range Rover III with BMW audio system
Steering wheel control interface and radio adapter cable for various BMW and Mini cars.
The CANbus interface and radio adapter cable is plug and play, it is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip, source and phone buttons from the steering wheel with the new radio.
The CANbus interface will also provide ignition, illumination, speed pulse, reverse gear and handbrake output signals to the new stereo.
BMW Mini car radio fascia adapter panel to allow the fitting of an aftermarket single din car stereo upgrade.
This fascia is a black adapter panel.
Suitable for fitting Mini cooper S (2002-2006) and Mini One (2001-2006).
Car radio fascia adapter panel to allow the fitting of an aftermarket Single/ double DIN car radio upgrade for Mini (F55 F56) cars (2014-2017)
Colour: High gloss black with a matte black trim to match the factory appearance
Suitable for:
Mini Cooper Hardtop: Coupe 3-Dr (F56) 2014-2017 and Sedan 5-Dr
172mm x 98mm. DOES NOT FIT COUNTRYMAN models
Replacement double din fascia for 2007 onwards model Mini Cooper cars.
Allows the fitting of a double din size aftermarket head unit into the dashboard.
BLACK
This fascia has side fixing brackets for the radio, no fitting cage is needed.
Pair of high quality 2-way 100 mm (4“) coaxial BMW and Mini dedicated speakers
20 mm soft dome tweeter
Max Power: 100 W / RMS Power: 50 W
Universal Butterfly bracket camera with adjustable bracket
Angled down
Waterproof
12v NTSC
Colour CMOS OV7959 quality
includes 5m Phono cable and 1.5m power cable
Includes reference lines option
Complete base plate for numberplate with built in camera.
Adjustable angle
Waterproof
12v
Colour CMOS OV7959 lens
includes power & phono cable
Universal bracket fix
Angled down
Waterproof
12v
Colour CMOS OV7960 quality
includes Phono cable
Includes reference lines option
Universal Push fit, Angled downwards NTSC format
Diameter 25.4mm
Waterproof
12v feed needed . Camera has with inbuilt 6v adapter
Colour CMOS lens
Includes reference lines option
Universal METAL BODY underhang rearview camera
with fixed screw thread
Includes options for Parking lines or Mirror image so can be used as a front view camera
metal body 170° back up camera NTSC, Parking lines on/off
Complete fitting kit to change the original radio in a 2001 to 2006 Mini Cooper or Mini One with original Boost CD radio for an aftermarket unit.
Kit includes:
-Fascia (50-117)
-Steering control interface (49-628)
-Patch lead (49-025)
-Antenna adapter (21-106)
Complete fitting kit to change the original radio in a 2001 to 2006 Mini Cooper or Mini One with original Wave cassette radio for an aftermarket unit.
Kit includes:
-Fascia (50-117)
-Steering control interface (49-627)
-Patch lead (49-025)
-Antenna adapter (21-106)
Replacement rear view mirror with a built in monitor for reverse camera and video input.
When not using the video input the mirror works as normal.
An additional mounting adapter is needed.
Replacement rear view mirror with a built in monitor for reverse camera and video input.
When not using the video input the mirror works as normal.
This monitor comes with a universal window mount (M-K06) which securely attaches the monitor to the vehicles windscreen
7 inch Rear view clip over mirror monitor
2 way video inputs
operated by touch or remote control
Clip over rear view mirror monitor for reverse came display.
5 inch display screen.
5 inch monitor with suction mount bracket. Ideal for reverse camera use. NTSC /PAL autoswitch
Rear view window mount Monitor designed to fit instead of the rear view mirror in panel vans. A self adhesive fixing pad is attached to the windscreen and then the monitor is attached to this.
Includes a cable cover. 2 video inputs. NTSC/PAL auto switch
Although we may have cables to fit the Double Din unit to your car there is either no facia conversion kit available, it is impossible to do or you will need professional engineers to adapt your dashboard.
Skins expert sound deadening
7 x sheets 0.27m x 0.38m
Multilayer vibration dampening. Aluminium foil, polymer layer on butyl rubber base.
3.0 mm Silver self adhesive