InCarTec Products > AUDIO SW CONTROL

Chrysler 300c, Dodge & Jeep CANbus Amplifier turn on and steering control interface

29-UC-050-CHR1
Price: £66.66 (£79.99 inc VAT)

PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description

CANbus steering control and Amplifier Turn On interface for Chrysler, Dodge and Jeep vehicles.

Switches on the original amplifier, retains the use of the steering wheel controls and give speed pulse and reverse gear CAN outputs.

This interface connects to the CANbus wires at the back of the radio. These are white and white/orange wires in pins 5 and 6 in the 22 way connector. Vehicles from 2005 generally had the CANbus wires present at the radio. We do recommend removing the head unit to check if the CANbus wires are present if the vehicle around a 2005 production year.

The CANbus interface retains the use of the original audio controls on the steering wheel with an after market head unit.

The interface also switches on the original amplifier in the car via a CANbus turn on signal.

Gives out speed pulse and reverse gear CANbus signals.


PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. if unsure please use our universal patch lead set

Radio Being Fitted
Part Number
Short Description

Resistive Programming (Loose Wire)

29-UCCAB-000Loose wire Patch lead for 29-UC Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos.
Alpine
29-UCCAB-001
Patch lead for 29-UC Series Steering wheel control for Alpine stereo.
Clarion/ JVC29-UCCAB-003
Patch lead for 29-UC Series Steering wheel control for Clarion/JVC stereos.
Kenwood/ JVC (Single Wire)29-UCCAB-005
 Single Wire Patch lead for 29-UC Series Steering wheel control for Kenwood/JVC stereos.
Pioneer/ Sony29-UCCAB-007
Patch lead for 29-UC Series Steering wheel control for Pioneer/Sony stereos.

Resistive Programming (3.5mm Jack)

29-UCCAB-016
3.5mm Jack Patch lead for 29-UC Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos.
Universal29-UCCAB-SET

Patch lead set for 29-UC Series Steering wheel control for Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive learning head units with either two wires or a 3.5mm jack.

PLEASE NOTE: This part is NOT suitable for Chrysler Sebring or 200

Brand: InCarTec

Car models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Chrysler - 300C 1st Gen (2005 - 2011)
Chrysler - PT Cruiser (1st Gen Facelift) (2006 - 2008)
Dodge - Caliber (2006 - 2008)
Jeep - Commander (XK) (2006 - 2009)
Jeep - Compass 1st Gen (MK49) (2007 - 2009)
Jeep - Grand Cherokee 3rd Gen (WK) (2005 - 2010)
Jeep - Patriot (MK74) (2007 - 2013)

Browse our products by category

NEW PRODUCTS & OFFERS
CARPLAY / ANDROID AUTO
Car radio stereos and head units
STEREO HEAD-UNIT FITTING - CAR SPECIFIC PARTS
STEREO HEAD-UNIT FITTING - UNIVERSAL PARTS
AERIALS & ANTENNA ADAPTERS
AUX, USB, RCA
AMPLIFIERS, SUBWOOFERS AND FITTING
SPEAKERS & FITTING KITS
BLAM AUDIO
Recoil Audio
SPEAKER FITTING PARTS
CAMERA INTEGRATION (Adding/Retaining)
VAN /COMMERCIAL CAMERAS & MONITORS
PARKING SENSORS
Dash Cams
CAR RADIO SPARES / OEM PARTS
TRADE PACK ESSENTIALS
WORKSHOP TRADE PARTS
BLUETOOTH KITS AND FITTING PARTS