Vehicle audio solutions since 2001
We also offer installation & fitting support. Ask us about fitting.
Vehicle-specific dual-lens high-level brake light camera for selected Fiat Ducato, Citroen Relay and Peugeot Boxer vans. Two separate cameras provide a dedicated reversing view plus a continuous rear-view image when connected to a compatible dual-input monitor or display system. Features selectable CVBS/AHD video, infrared night vision, IP68 weather protection and vehicle-specific brake light housing for a discreet OEM-style installation.
PLEASE NOTE: If connecting to a standard Video input (RCA/PHONO) connector an additional 2x CVC-CB-09 converter cables will be required.
Improve rear visibility with this vehicle-specific dual-lens high-level brake light camera for selected Fiat Ducato, Citroen Relay and Peugeot Boxer vans.
The dual-camera design provides two separate rear views. One camera can be used as a dedicated reversing view while the second can provide a continuous rear-view image when connected to a suitable monitor or display system.
Both cameras are integrated into the replacement high-level brake light housing, creating a discreet OEM-style installation without requiring separate universal camera brackets.
Use one camera for reversing and the second for a continuous rear-view image while driving.
Integrated into the replacement high-level brake light housing for a clean vehicle-specific fit.
High-level mounting provides useful visibility behind large vans where conventional mirrors may leave blind areas.
Selectable video formats allow connection to a range of compatible monitors and aftermarket display systems.
High-brightness infrared LEDs support rear visibility in low-light conditions, with a night vision distance of approximately 30ft.
Designed for exterior vehicle installation with an IP68-rated, temperature-resistant camera housing.
A conventional reversing camera is normally positioned to provide the best view immediately behind the vehicle when parking or manoeuvring. A dual-lens system adds a second camera that can provide a more conventional rear-view perspective.
When used with a suitable dual-input monitor or switching system, this allows the driver to have a continuous rear image while travelling and a separate downward reversing view when reverse gear is selected.
This makes the system particularly useful for panel vans, campervans, motorhome conversions, commercial vehicles and vehicles with restricted visibility through the rear doors.
Please Note: Vehicle variations can exist within the listed production years. Compare the product photographs, brake light housing shape and dimensions with the original high-level brake light before ordering.
If connecting to a standard Video input (RCA/PHONO) connector, an additional 2x CVC-CB-09 converter cables will be needed.
Always compare the original brake light housing with the product photographs before ordering.
| Sensor | 1/2.7 FH8536H + C2399 |
|---|---|
| Video signal | CVBS / AHD optional |
| TV system | NTSC / PAL optional |
| CVBS effective pixels | 728(H) × 488(V) |
| AHD 1080P effective pixels | 1920(H) × 1080(V) |
| AHD 720P effective pixels | 1280(H) × 720(V) |
| Resolution | 700–1000 TVL |
| Minimum illumination | 0.1 lux; 0 lux with LED active |
| IR LED | High-brightness LED |
| Night vision distance | Approximately 30ft |
| IP rating | IP68 |
| Current consumption | 150mA |
| Power supply | 12V standard |
| Voltage compatibility | 5V–18V |
| Connector | 4-pin aviation female |
| Operating temperature | -30°C to +75°C, RH95% max |
| Storage temperature | -40°C to +85°C, RH95% max |
| Material | PC plastic |
| Housing properties | High- and low-temperature resistant, flame retardant |
The two camera feeds connect through the supplied splitter and extension cable.
Each camera uses a 4-pin aviation connection.
PLEASE NOTE: If connecting to standard Video inputs (RCA/PHONO), an additional 2x CVC-CB-09 converter cables will be needed.
One camera can provide a continuous image behind the vehicle when connected to a monitor that remains active while driving.
The second camera can provide a more downward-facing view of the area immediately behind the vehicle for parking and low-speed manoeuvring.
How the two images are displayed will depend on the monitor, stereo or camera switching equipment used.
The camera system can be used with suitable:
Always confirm that the selected display supports the camera's video signal. An AHD camera output requires an AHD-compatible display.
If the display uses standard RCA/phono video inputs, an additional 2x CVC-CB-09 converter cables will be needed for the two camera feeds.
PLEASE NOTE: If connecting to a standard Video input (RCA/PHONO) connector, an additional 2x CVC-CB-09 converter cables will be needed.
A dual-lens brake light camera contains two independent cameras within the same high-level brake light housing. This allows one camera to provide a reversing view while the second can provide a continuous rear-view image.
Yes. One camera feed can provide a continuous rear-view image when connected to a suitable monitor that can remain active while the vehicle is being driven.
Yes. The two cameras provide separate video feeds, allowing them to be connected to suitable individual inputs or a compatible camera switching system.
This depends on the stereo. Many stereos provide only one reversing camera input, so an additional video switcher, monitor or interface may be required to use both camera feeds.
If connecting to standard RCA/phono video inputs, an additional 2x CVC-CB-09 converter cables will be needed.
AHD can provide a higher-resolution image but requires an AHD-compatible monitor or stereo. CVBS is a standard analogue video signal supported by many conventional reversing camera displays.
Yes. The camera uses high-brightness infrared LEDs to support rear visibility in low-light conditions, with a night vision distance of approximately 30ft.
No. Brake light housings can vary by model year and vehicle specification. Always compare the original brake light with the product photographs before ordering.
Contact InCarTec with the vehicle make, model, year, brake light photographs and details of the monitor or stereo being used.
Contact InCarTecBrand: InCarTec
Car models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Citroën - Relay 3 1st Facelift (2014 - 2021)
Citroën - Relay 3 2nd Facelift (2021 - 2025)
Fiat - Ducato 3rd Gen (2006 - 2014)
Fiat - Ducato 3rd Gen Facelift (X290) (2014 - 2021)
Fiat - Ducato 3rd Generation Series III (X290) (2021 - 2025)
Peugeot - Boxer 3rd Gen Facelift (X290) (2014 - 2024)
Peugeot - Boxer 3rd Gen Facelift 2 (2024 >)
© Copyright 2026 InCarTec. All Rights Reserved
