Vehicle audio solutions since 2001
We also offer installation & fitting support. Ask us about fitting.
Improve rear visibility with this high-level brake light reversing camera for selected Fiat Ducato, Citroen Relay, Peugeot Boxer and Vauxhall or Opel Movano vans.
The camera is integrated into a replacement high-level brake light housing, providing a discreet OEM-style installation without requiring a separate universal camera bracket. Its elevated position provides a useful view behind the vehicle when reversing, parking or manoeuvring.
Selectable AHD or CVBS video output allows the camera to be used with a range of compatible aftermarket stereos, commercial vehicle monitors and reversing camera display systems.
Integrated into the replacement high-level brake light housing for a neat and discreet appearance.
The high mounting position helps the driver see obstacles directly behind the van.
Selectable video output provides compatibility with a wider range of suitable stereos and monitors.
A high-brightness infrared LED supports rear visibility in low-light and dark conditions.
The weather-resistant camera is designed for exterior installation on vans and commercial vehicles.
Supports a 5V to 18V operating range with a standard 12V power supply.
By default, the parking guidelines are activated via either a green or white jumper wire on the camera cable.
The guidelines can be disabled by cutting the corresponding jumper wire. The jumper colour may vary, so check the supplied camera cable before cutting and insulate both cut wire ends securely.
Please Note: Vehicle variations may exist within the listed production years. Compare the product photographs, brake light shape, dimensions and connector with the parts fitted to the vehicle before ordering.
| Sensor | 1/2.7 FH8536H + C2399 |
|---|---|
| Video signal | CVBS / AHD optional |
| TV system | NTSC / PAL optional |
| CVBS effective pixels | 728(H) × 488(V) |
| AHD 1080P effective pixels | 1920(H) × 1080(V) |
| AHD 720P effective pixels | 1280(H) × 720(V) |
| Resolution | 700–1000 TVL |
| Minimum illumination | 0.1 lux; 0 lux with LED active |
| Infrared LED | High-brightness LED |
| Night vision distance | Up to approximately 30ft |
| Waterproof rating | IP68 |
| Current consumption | 150mA |
| Standard power supply | 12V |
| Voltage compatibility | 5V–18V |
| Connector | 4-pin aviation female |
| Operating temperature | -30°C to +75°C, RH95% maximum |
| Storage temperature | -40°C to +85°C, RH95% maximum |
| Housing material | PC plastic |
| Housing properties | High- and low-temperature resistant and flame retardant |
Depending on the installation, the camera may be connected to:
The camera uses a 4-pin aviation female connector. A compatible extension cable, 4-pin-to-RCA adapter or vehicle-specific camera interface may be required.
The camera and display must support the same video format. AHD output requires an AHD-compatible monitor or stereo.
The camera is integrated into a replacement high-level brake light housing, providing a vehicle-specific appearance while retaining the brake light function.
No. The parking guidelines are activated by default through either a green or white jumper wire. They can be disabled by cutting the corresponding jumper on the camera cable.
Yes, provided the stereo has a compatible reversing camera input and supports the selected video format.
A compatible vehicle-specific camera interface will normally be required. Factory screens do not usually accept an aftermarket camera directly.
AHD can provide a higher-resolution image but requires an AHD-compatible display. CVBS is a standard analogue format supported by many aftermarket stereos and reversing camera monitors.
Yes. The high-brightness infrared LED supports visibility in dark conditions, with a night vision distance of up to approximately 30ft.
The camera has an IP68 waterproof rating and is designed for exterior vehicle installation.
Contact InCarTec with the vehicle make, model, year and photographs of the existing high-level brake light for product advice.
Contact InCarTecBrand: InCarTec
Car models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Citroën - Relay 2 (2006 - 2011)
Citroën - Relay 3 (2012 - 2014)
Citroën - Relay 3 1st Facelift (2014 - 2021)
Citroën - Relay 3 2nd Facelift (2021 - 2025)
Fiat - Ducato 3rd Gen (2006 - 2014)
Fiat - Ducato 3rd Gen Facelift (X290) (2014 - 2021)
Fiat - Ducato 3rd Generation Series III (X290) (2021 - 2025)
Peugeot - Boxer 2 (2006 - 2011)
Peugeot - Boxer 3 (2012 - 2014)
Peugeot - Boxer 3rd Gen Facelift (X290) (2014 - 2024)
Peugeot - Boxer 3rd Gen Facelift 2 (2024 >)
Vauxhall / Opel - Movano (2022 - 2025)
© Copyright 2026 InCarTec. All Rights Reserved
