PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description
CANbus steering wheel control interface for Mercedes CLS W219, E Class W211 and SLK R171 cars with original Mercedes NTG1 head units.
Gives CANbus Ignition outputs and retains steering wheel controls.
The CANbus interface will also give out CAN ignition, speed pulse and reverse gear outputs.
The cable adapts from the Quadlock connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.
The CANbus steering wheel control interface is built in to the adapter cable for a plug and play installation
This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume and track skip buttons.
The CANbus interface will also provide ignition, illumination, reverse gear, handbrake and speed pulse outputs.
This is an alternative to 39-MB-A20NTG1
PLEASE NOTE: This interface is only suitable for cars with original basic NTG1 radios. Cars with the upgraded COMAND APS NTG1 radio will require a different interface.
The motorized ashtray on W211 cars will no longer work when you change the original radio
Cars with original harman/kardon amplified audio systems will require an additional interface to retain the audio with the original amplifier.
PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. if unsure please use our universal patch lead set
| Radio Being Fitted | Part Number | Short Description |
Resistive Programming (Loose Wire) | 29-UCCAB-000 | Loose wire Patch lead for 29-UC Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos. |
| Alpine | 29-UCCAB-001 | Patch lead for 29-UC Series Steering wheel control for Alpine stereo. |
| Clarion/ JVC | 29-UCCAB-003 | Patch lead for 29-UC Series Steering wheel control for Clarion/JVC stereos. |
| Kenwood/ JVC (Single Wire) | 29-UCCAB-005 | Single Wire Patch lead for 29-UC Series Steering wheel control for Kenwood/JVC stereos. |
| Pioneer/ Sony | 29-UCCAB-007 | Patch lead for 29-UC Series Steering wheel control for Pioneer/Sony stereos. |
Resistive Programming (3.5mm Jack) | 29-UCCAB-016 | 3.5mm Jack Patch lead for 29-UC Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos. |
| Universal | 29-UCCAB-SET | Patch lead set for 29-UC Series Steering wheel control for Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive learning head units with either two wires or a 3.5mm jack. |
Brand: InCarTec
Car models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Mercedes - C-Class (2nd Gen) W203 Facelift (2004 - 2007)
Mercedes - CLS 1st Gen (W219) (2005 - 2010 )
Mercedes - E-Class (W211) (2002 - 2008 )
Mercedes - SLK-Class (R171) (2004 - 2008)
