Steering wheel control interface and adapter cable for Nissan Juke, Micra K13, Navara D40, Note, Qashqai and X-Trail cars to fit an aftermarket radio upgrade.
The cable adapts from the 20 pin Nissan connector (the connector has a larger size terminal at either end of the connector) in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.
The steering wheel control interface is built in to the adapter cable for a plug and play installation.
This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume, track skip, source, phone and preset skip buttons. (8 function steering wheels)
The Enter and Back buttons will not be functional after the radio has been changed.
This interface fits cars with the newer 20 way connector behind the radio which has two larger terminals on either side for power and earth.
For compatible Bluetooth Head-units press the phone button to answer phone, press and hold the phone button to reject/end a call.
These radios will also have an additional smaller connector, this is used for CD changer and navigation audio. It is not used when changing the head unit.
Compatibility notes:
Juke 2010 onward models
Micra K13 models
Navara D40 cars with original dash top navigation screens. Not for vehicles with basic radios or Nissan Connect double din sat nav radios.
Note 2013 - 2018 cars.
Pathfinder 2005 - 2013 cars with original dash top navigation screens
Qashqai 2007 - 2013 cars with original dash top navigation screens. Not for cars with basic radios or Nissan Connect double din sat nav radios.
X-Trail 2007 - 2014 cars with origingal dash top navigation screens. Not for cars with basic radios or Nissan Connect double din sat nav radios.
Below are examples of 8 function steering wheels
PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.
| Radio Being Fitted | Part Number | Short Description |
| Resistive Programming (Loose Wire) | 29-000 | Loose wire Patch lead for 29-Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos. |
| Alpine | 29-001 | Patch lead for 29-Series Steering wheel control for Alpine stereos. |
| Clarion | 29-003 | Patch lead for 29-Series Steering wheel control for Clarion stereos. |
| JVC (Single Wire) | 29-004SW | Single Wire Patch lead for 29-Series Steering wheel control for JVC stereos. |
| Kenwood | 29-005 | Patch lead for 29-Series Steering wheel control for Kenwood stereos. |
| Pioneer | 29-007 | Patch lead for 29-Series Steering wheel control for Pioneer stereos. |
| Sony | 29-008 | Patch lead for 29-Series Steering wheel control for Sony stereos. |
| Resistive Programming (3.5 Jack) | 29-016 | 3.5mm Jack Patch lead for 29-Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos. |
| Universal | 29-025 | Self-Pinning Patch lead for Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive programming head units with either two wires or a 3.5mm jack. |
Brand: InCarTec
Car models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Nissan - 370Z Coupe, Roadster (2009 - 2021)
Nissan - Cube (2010)
Nissan - Juke 1st GEN (F15) (2010 - 2014)
Nissan - Juke 1st GEN Facelift (F15) (2014 - 2019)
Nissan - Micra K13 (2010 - 2017)
Nissan - Navara (D40) (2005 - 2016)
Nissan - Note (2013 - 2018)
Nissan - Pathfinder R51 (2005 - 2013)
Nissan - Qashqai 1st Gen (J10) (2007 - 2013)
Nissan - Serena 3rd Gen (C25) (2005 - 2010)
Nissan - Tiida (2004 - 2011)
Nissan - X-Trail 2nd Gen (T31) (2007 - 2014)
