PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description
Interface to retain the use of the steering wheel controls in various Volkswagen vehicles including Amarok, Beetle, Caddy and Transporter T6 (WITH NEW STYLE QUADLOCK) This is a new style Quadlock connector used on select VW vehicles. This can be identified by the 2 larger pins In the corner of the connector. Comes supplied with 21-139 double fakra antenna adapter.
PLEASE NOTE: DOES NOT RETAIN ANY MULTIFUNCTION DISPLAY INFORMATION PLEASE USE ONE OF OUR DISPLAY RETENTION FITTING KITS (FK-699-T6-DMX02, FK-699-T6-ILX) TO ACHIEVE THIS
Volkswagen (NEW STYLE QUADLOCK) Steering Wheel Control CAN Interface adapter cable
Interface to retain the use of the steering wheel controls in various Volkswagen vehicles including Amarok, Beetle, Caddy and Transporter T6 (WITH NEW STYLE QUADLOCK)
This interface comes with a double fakra antenna adapter, so no additional antenna adapter is required with this part.
PLEASE NOTE: This is a new style Quadlock connector used on select VW vehicles. This can be identified by the 2 larger pins In the corner of the connector
This interface retains the use of the steering wheel audio controls with a new aftermarket radio including the use of the telephone buttons, answer call, reject call and voice command/Siri (depending on head unit compatibility).
This interface provides CANbus ignition to the new radio and speed pulse, reverse gear and handbrake CANbus outputs.
This adapter will not affect the original parking sensors however it will not display the visual imaging from the original display.
This is an alternative product to 49-VW-05
| Radio Being Fitted | Part Number | Short Description |
Resistive Programming (Loose Wire) | 29-UCCAB-000 | Loose wire Patch lead for 29-UC Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos. |
| Alpine | 29-UCCAB-001 | Patch lead for 29-UC Series Steering wheel control for Alpine stereo. |
| Clarion/ JVC | 29-UCCAB-003 | Patch lead for 29-UC Series Steering wheel control for Clarion/JVC stereos. |
| Kenwood/ JVC (Single Wire) | 29-UCCAB-005 | Single Wire Patch lead for 29-UC Series Steering wheel control for Kenwood/JVC stereos. |
| Pioneer/ Sony | 29-UCCAB-007 | Patch lead for 29-UC Series Steering wheel control for Pioneer/Sony stereos. |
Resistive Programming (3.5mm Jack) | 29-UCCAB-016 | 3.5mm Jack Patch lead for 29-UC Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos. |
| Universal | 29-UCCAB-SET | Patch lead set for 29-UC Series Steering wheel control for Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive learning head units with either two wires or a 3.5mm jack. |
Brand: InCarTec
Car models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Seat - Alhambra Mk2 (7N) (2010 - 2020)
Seat - Mii (2011 - 2021)
Skoda - Citigo (2011 - 2020)
Volkswagen - Amarok (2018 - 2022)
Volkswagen - Beetle (A5) (2011 - 2019)
Volkswagen - Caddy (3rd Gen Facelift 2.0) (2016 - 2020)
Volkswagen - Passat CC (2008-2017)
Volkswagen - Scirocco (2008 - 2017)
Volkswagen - Sharan II (2010 - 2022)
