Double Fakra to DIN aerial adapter (Phantom Power) with Bullet connector

Double Fakra to DIN antenna adapter cable with 12v phantom power from a male bullet connection. This antenna adapter cable adapts from the original Double Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade.

Audi Quadlock CAN steering wheel control interface and audio adapter cable for rear amplified cars

This cable adapts from the original connector in the car, known as a quadlock, to standard aftermarket connectors for the new stereo, known as ISO connectors. The CANbus steering wheel control interface will retain the use of the original radio controls on the steering wheel with an aftermarket stereo. The CANbus interface generates a key present ignition supply to the new stereo, this means the stereo will turn on with the first click of the key and stay on until the key is removed from the ignition barrel. The interface also generates speed pulse, reverse gear and handbrake output signals, these are used when installing multimedia, navigation units and reverse cameras. This interface is built into the Quadlock to ISO harness adapter.

The Quadlock to ISO cable also has a built in high to low level adapter for the rear amplified speakers. The adapter allows the new stereo to work with the original factory rear speakers. The high to low level adapter gives a much cleaner audio signal to the amplifier compared to using line output phono leads.