We also offer installation & fitting support. Ask us about fitting.
Retain the original factory reversing camera when replacing a compatible Ford Blaupunkt TravelPilot NX, HS RNS or MCA navigation head unit with an aftermarket stereo. This 250mm RG174 adapter converts the vehicle’s single FAKRA camera connection to an RCA/phono connection. Suitable for selected Ford Kuga Mk1, Focus Mk2 Facelift and C-Max Mk1 Facelift models.
PLEASE NOTE: This cable is only compatible with single fakra connections. Double fakra connections are not supported.
This factory camera retention adapter allows the original Ford reversing camera to be connected to a compatible aftermarket car stereo when replacing selected Blaupunkt TravelPilot navigation systems.
The adapter converts the vehicle’s single factory FAKRA camera connection to a standard RCA/phono connection for the reversing camera input on a compatible aftermarket head unit. It uses 250mm of RG174 coaxial cable and avoids cutting or permanently modifying the original camera wiring.
This adapter is designed to retain a compatible original Ford reversing camera when the factory Blaupunkt navigation radio is replaced with an aftermarket head unit.
It converts the vehicle’s single FAKRA camera connection to an RCA/phono connection that can be connected to the reversing camera input on a compatible aftermarket stereo.
Suitable for selected Ford vehicles originally equipped with a factory reversing camera and a compatible Blaupunkt satellite-navigation head unit.
Depending on the vehicle and production year, the compatible navigation system may be described as:
The compatible head unit can generally be identified by its large factory navigation display and integrated dual-zone climate-control panel positioned along the bottom of the radio assembly.
Suitable for selected versions of the following vehicles with the compatible TravelPilot NX, HS RNS or MCA system and an original factory reversing camera:
Compatibility is determined by the original radio, factory camera and connector type rather than vehicle model and year alone.
Some visually similar TravelPilot units were supplied without a reversing camera input. Remove the original head unit and check its connections before ordering.
If the original camera connection is located on a separate navigation module away from the new radio position, an additional FAKRA extension cable may be required.
The aftermarket head unit must receive a suitable reverse-gear trigger so it switches to the camera input when reverse is selected. This may be supplied by a steering wheel control interface, CAN bus interface or a correctly connected reverse signal.
Additional vehicle-specific fitting parts may also be required, including a fascia adapter, wiring interface, steering wheel control interface and antenna adapter.
This is a passive connection adapter. It changes the physical camera connection from FAKRA to RCA/phono but does not convert the video format, resolution or camera operating voltage.
The original Ford camera signal must be compatible with the reversing camera input on the aftermarket head unit. A separate video converter or camera power adapter may be required if the systems use different signal formats or voltages.
Remove the original Ford navigation head unit or associated navigation module and locate the factory camera’s single FAKRA connection.
Connect the vehicle’s FAKRA camera plug to this adapter and connect the RCA/phono end to the rear camera input on the aftermarket stereo.
Configure the aftermarket stereo for reversing camera operation and connect the required reverse trigger. Test the camera image before fully reassembling the dashboard.
Professional installation is recommended if the camera connector, video format, camera voltage or reverse trigger is unclear.
Factory equipment can vary within the same Ford model, trim level and production year. Check the original radio system and camera connector before ordering.
This adapter only retains an existing compatible factory camera. It does not activate a camera input that is not present and does not add a camera to a vehicle without one.
Only single FAKRA camera connections are supported. Double FAKRA connections require a different solution.
Brand: InCarTec
Car models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Ford - C-MAX 1st Gen (C214) (2003 - 2010)
Ford - Focus Mk2 (C307) (2005 - 2011)
Ford - Kuga 1st Gen (C394) (2008 - 2012 )
© Copyright 2026 InCarTec. All Rights Reserved