We also offer installation & fitting support. Ask us about fitting.
Add an aftermarket reverse camera and up to two additional NTSC video sources to selected Land Rover factory navigation screens with GVIF technology. Suitable for compatible Discovery 3, Freelander 2, Range Rover L322 and Range Rover Sport L320 models with touchscreen navigation version 1 or 1.1. Supports automatic reverse-camera display when reverse gear is selected. Video only; cameras are not included.
PLEASE NOTE: Only suitable for vehicles with factory navigation, interface only works with navigation switched on
This video insertion interface allows compatible aftermarket video sources to be displayed through the vehicle’s original factory navigation screen without replacing the infotainment system.
It provides one dedicated input for an aftermarket reverse camera and two additional composite video inputs. One of the additional inputs can be used for a compatible front-view camera, while the other can be connected to another NTSC video source.
This interface inserts video only. It does not provide an audio input or transmit sound through the factory system.
Suitable for selected versions of the following vehicles with the correct factory touchscreen navigation system and GVIF connection:
Compatibility depends on the factory navigation version rather than the vehicle model and year alone. Check the original screen, navigation menu and GVIF connection before ordering.
This interface is not suitable for vehicles without factory navigation or for vehicles fitted with an incompatible later infotainment system.
A compatible NTSC aftermarket reverse camera connects to the dedicated camera input. A front camera or other aftermarket video equipment can be connected to the additional video inputs.
Only enabled inputs are included in the source-selection sequence. Inputs that are not required can be disabled using the interface settings.
When correctly connected, the interface automatically switches from the factory display to the aftermarket reverse-camera input when reverse gear is engaged.
An external reverse-gear switching signal is required. Because the reversing-light supply may not provide a stable signal, a suitable relay or signal filter may also be required.
On compatible Land Rover vehicles, automatic switching to the aftermarket reverse camera is only available while the factory navigation system is operating in map mode.
The reverse camera is not supplied with this interface and must be purchased separately.
The included external keypad allows the user to switch between the factory display and the enabled additional video inputs.
When both additional inputs are enabled, the switching sequence is:
Disabled inputs are automatically skipped. An appropriate voltage pulse applied to the interface’s switching wire can also be used to change the displayed video source.
The interface includes an on-screen display menu for adjusting the inserted video image. Available settings include:
A working video source must be connected and selected before its picture settings can be adjusted.
The video interface connects behind the vehicle’s original factory monitor and requires access to the GVIF video connection, power supply, ground and reverse-gear trigger.
Some Land Rover vehicles with touchscreen navigation version 1 require modification and soldering of the blue GVIF connections. Professional installation by an experienced vehicle-electronics or car-audio installer is strongly recommended.
A full test should be completed before the dashboard is reassembled. This should include checking the factory display, reverse-camera switching, additional video inputs and correct vehicle sleep-mode operation.
Install the interface in a dry location away from moisture and heat sources.
This interface only works with the compatible factory navigation system switched on.
The vehicle must have a compatible factory touchscreen navigation system with GVIF technology. Compatibility cannot be confirmed from the vehicle model and registration year alone.
The interface accepts NTSC video signals only. Cameras or video sources set to PAL, AUTO or an incompatible multi-standard output may produce no picture, a distorted image or an unstable display.
This interface inserts video only. Audio from an additional AV source must be connected separately through a compatible factory AUX input or another suitable audio solution.
Cameras and other aftermarket video sources are not included.
Moving video must never be displayed where it could distract the driver. Additional video sources should only be viewed when the vehicle is safely parked, except for permitted driving information or the reverse-camera image.
The driver remains responsible for checking the vehicle’s surroundings. A camera system is an aid and does not replace direct observation.
Brand: InCarTec
Car models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Landrover - Discovery III (LR3) (2004 - 2009)
Landrover - Freelander II (L359) (2006 - 2014)
Landrover - Range Rover III (L322/Vogue) (2002 - 2010)
Landrover - Range Rover Sport (L320) (2005 - 2009)
© Copyright 2026 InCarTec. All Rights Reserved