Vehicle audio solutions since 2001
We also offer installation & fitting support. Ask us about fitting.
Add an aftermarket reverse camera to the original 7-inch MBUX touchscreen in selected Mercedes Sprinter W907 and W910 models manufactured from 2018-2023. Designed for non-navigation systems with a 31-pin connector, the interface automatically displays the camera when reverse gear is selected. It supports AHD 1080p, AHD 720p and CVBS cameras, selectable parking guidelines, a front-camera input and an optional DVR input. Camera sold separately.
PLEASE NOTE: Only suitable for Mercedes vehicles with a 7 inch screen without satellite navigation. The connector behind the radio is 31-pin. Does not display the original parking sensor graphic while the camera is active.
Add an aftermarket reversing camera to the original Mercedes Sprinter MBUX touchscreen without replacing the factory radio. Designed for selected W907 and W910 models manufactured from 2018-2023 with a 7-inch non-navigation system and 31-pin connector.
This interface allows a compatible aftermarket reverse camera to display through the original 7-inch Mercedes MBUX touchscreen. It provides a discreet, factory-style camera upgrade without requiring the original infotainment system to be replaced.
When reverse gear is selected, the interface automatically changes the display to the rear camera input. The normal MBUX display returns when the vehicle is taken out of reverse.
Improved rear visibility can be particularly useful in commercial vehicles, long-wheelbase vans and vehicles with limited rearward visibility.
Automatically switches the original screen to the connected rear camera when reverse gear is selected.
Supports compatible AHD 1080p, AHD 720p and standard CVBS camera signals.
Parking guidelines can be enabled or disabled through the interface settings.
A compatible front camera can be displayed for approximately 10 seconds after shifting out of reverse.
Includes an additional video input for a compatible optional DVR or supported video source.
Keeps the factory MBUX radio and touchscreen in place for a clean, integrated installation.
This interface is only suitable for selected Mercedes Sprinter models manufactured from 2018-2023 with the factory 7-inch MBUX touchscreen, no built-in satellite navigation and a 31-pin connector behind the radio.
View Installation Instructions| Vehicle | Model | Years | Factory system | Required connection |
|---|---|---|---|---|
| Mercedes-Benz Sprinter | W907 / W910 | 2018-2023 | 7-inch MBUX without navigation | 31-pin connector |
The vehicle must have the original 7-inch MBUX touchscreen without factory satellite navigation. The radio must use the matching 31-pin connector.
This interface is not suitable for the optional 10.25-inch MBUX display or systems with a different radio connector. Check the original screen, system specification and connector before ordering.
The rear camera input is activated automatically when reverse gear is selected. When reverse is disengaged, the display returns to the original MBUX system.
If a compatible front camera is connected and configured, the front-camera image can remain on the screen for approximately 10 seconds after shifting out of reverse.
The interface can display parking guidelines over the rear camera image. These guidelines can be enabled or disabled through the interface settings.
The original Mercedes parking distance control graphic is not displayed while the camera image is active. Audible parking sensor operation depends on the vehicle’s original equipment and configuration.
The factory radio and dashboard trim must be removed to install the interface. The interface is connected between the original MBUX system and its factory wiring and display connections.
Configure the interface for the Sprinter NTG6 non-navigation system before testing. Test the rear camera, front camera, guidelines and original MBUX functions before fully reassembling the dashboard.
Professional installation is recommended due to the dashboard disassembly, interface configuration and camera wiring required.
No. This product is the camera integration interface. A compatible rear camera and any required installation cables must be purchased separately.
No. This interface is intended for the compatible 7-inch MBUX system without factory navigation.
Yes. Once installed and configured correctly, the rear camera input is displayed automatically when reverse gear is selected.
No. The original parking distance control graphic is not displayed while the reverse camera image is active.
Brand: InCarTec
Car models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Mercedes - Sprinter (W907/910) VS30 (2019 - 2023)
© Copyright 2026 InCarTec. All Rights Reserved
