We also offer installation & fitting support. Ask us about fitting.
Add an aftermarket reversing camera to the original 10-inch touchscreen in selected Peugeot, Citroen, Fiat Scudo and Vauxhall Vivaro vehicles. The interface automatically displays the camera when reverse gear is selected, supports dynamic parking guidelines and integrates compatible factory parking-sensor graphics.
PLEASE NOTE: Designed for non-Quadlock systems with a 12-pin connection at the radio module. Optional front camera or DVR input included. Please confirm compatibility before purchasing!
This camera integration interface allows an aftermarket reversing camera to be connected to the original factory-fitted 10-inch touchscreen in selected Peugeot, Citroen, Fiat and Vauxhall vehicles.
When reverse gear is selected, the interface automatically switches the original display to the rear camera image. It also supports dynamic parking guidelines and can integrate compatible factory parking-sensor information to provide a combined visual parking display.
An additional video input is provided for an optional front camera or DVR. The interface connects through the LVDS video cable behind the factory radio module, so no special vehicle coding is normally required.
This vehicle-specific video interface adds an aftermarket rear-view camera input to the original factory 10-inch touchscreen.
It is intended for compatible vehicles where the original display is being retained and a reversing camera image needs to be shown through the factory infotainment system.
Once installed, the interface monitors the vehicle and automatically switches the original touchscreen to the aftermarket rear camera image when reverse gear is selected.
When reverse gear is disengaged, the display returns to its previous factory screen. Operation may vary slightly depending on the vehicle’s original infotainment and parking-assistance specification.
The interface supports active parking guidelines that move in response to steering input, helping the driver judge the projected path of the vehicle while reversing.
In compatible vehicles fitted with original parking sensors, the interface can combine the rear camera picture with the factory visual parking-sensor information.
Available parking graphics depend on the vehicle’s original equipment and configuration.
In addition to the reversing camera input, the interface provides an optional video input that can be used for a compatible front-facing camera or DVR video source.
Additional cameras, DVR equipment and any application-specific wiring are sold separately unless expressly stated otherwise.
Suitable for selected versions of the following vehicles fitted with the compatible original 10-inch touchscreen and 12-pin radio-module connection:
Citroen
DS Automobiles
Fiat
Peugeot
Vauxhall / Opel
Compatibility is determined by the factory infotainment system and radio connection, not by vehicle model and year alone.
Remove the factory radio module and check its connectors before ordering. A similar-looking dashboard or screen does not guarantee compatibility.
The interface installs behind the original radio module and integrates with the factory LVDS video cable. Once correctly installed, no special coding is normally required.
Route the camera wiring carefully from the rear of the vehicle to the radio location, avoiding airbags, moving components, sharp metal edges and high-current wiring.
Test the camera image, reverse activation, parking guidelines, parking-sensor display and all factory infotainment functions before reassembling the dashboard.
Installation requires access to the factory radio module, LVDS video connection and vehicle trim. We recommend fitting by an experienced car-audio or vehicle-electronics technician.
If you are unsure about the screen, radio connector or vehicle specification, confirm compatibility with the InCarTec sales team before purchasing.
Vehicle specifications can change within the same model and production year. Compatibility must be confirmed using the original screen type and the connections at the rear of the factory radio module.
Dynamic guidelines and factory parking-sensor graphics depend on compatible vehicle data being available. Vehicles without the corresponding original equipment will not gain those factory features.
This product is a camera integration interface. An aftermarket reversing camera is required and is sold separately unless stated otherwise.
A reversing camera, front camera and DVR are not included unless specifically stated.
Brand: InCarTec
Car models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Citroën - Dispatch/Space Tourer/Jumpy (2016 >)
Fiat - Scudo 3rd gen (2022 >)
Fiat - Ulysse 3rd Gen (2022 >)
Peugeot - Expert Mk III (Traveller) (2016 >)
Vauxhall / Opel - Vivaro C (Vivaro/Zafira Life) (2019 >)
© Copyright 2026 InCarTec. All Rights Reserved