This cable can be used in place of the standard ISO mute relay that is supplied with Bluetooth and standard Handsfree car kits.
Can also be used in conjunction with a car specific lead to convert the audio to low level signal as required by BOSE or Infinity style amplifiers.
Designed for Parrot MKi but can also be used with CK3100 by using the cable adapter provided.
For Fiat and Alfa Romeo cars that do not have an ignition power supply in the factory harness.
This cable includes the power and speaker supply and provides an ignition supply from the cars CAN bus data system when the key is in the accessory position.
4 channel adjustable ISO to ISO amplifier interface.
Use to install a new radio in a car that has an original fit amplifier that takes a pre amplified audio feed.
This interface converts the high level audio output of a new head unit to a low level pre amplified signal which will work with an amplifier.
4 adjustable channels for optimum audio quality, it has a built in ground loop isolator and filters to get the best sound from the amplifier.
Male Fakra to Male DIN car aerial antenna adapter cable. This cable adapts from a Fakra connector in the car to a standard aftermarket DIN antenna connector, this is used when fitting an aftermarket stereo upgrade.
Aux in interface kit to add aux in to Fiat and Alfa Romeo cars that have original Blue and Me systems with a USB socket.
Kit comes with plug and play aux adapter cables and a USB drive to activate the aux in feature.
Keeps original USB and AUX sockets on Fiat and Alfa cars with Blue & Me system. Allows you to maintain the cars existing AUX socket and use it with a new aftermarket head-unit.
This unit uses the cars original housing
Universal CANBUS interface providing a single output.
This device provides a default IGNITION out for cars listed but can be programmed to change the dfault to Illumination, Speed pulse, Reverse gear or Handbrake.
Universal CANBUS interface providing two outputs.
This default output on this device is IGNITION & SPEED pluse but is can be programmed to change to , Illumination, Reverse gear or Handbrake or on selected vehicles amplifier wake up and parking sensor recovery.
Rear view camera and video input interface suitable for various Alfa Romeo, Citroen, Dodge and Fiat vehicles with Uconnect 5 VP2/ RA2 with DIN housing behind the front panel and 5 inch monitor . This interface allows you to connect a rear-view camera and two additional video-sources to a factory-infotainment system.
PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES
This patch lead gives out a fixed voltage between the tip and base of the 3.5mm jack plug. Use with self learning programable aftermarket units like Blaupunkt. Also for Kenwood, Sony units using their "CUSTOM" setting for steering control input
Only to be used with In Car Tec 29 series steering wheel control interfaces.
NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.
Alfa Romeo GT Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.
This interface also has a built in CANbus interface to generate an ignition power supply, also gives a speed pulse output.
THIS IS NOT A DIY PRODUCT .It should only be fitted be experienced 12V engineers.
CANbus interface for various Alfa Romeo and Fiat vehicles with ISO connectors behind the radio to retain the use of the steering wheel controls and provide CANbus outputs. Stops original display flashing once the correct settings have been made.
Car Audio Steering wheel interface allowing use of original buttons with a new aftermaket head-unit. Use with Alfa /Fiat cars 2014 onwards with the new large connector behind the radio.
Includes Ignition , speed pulse, reverse, handbrake and illumination signals.
Also works on selected other vehicles, see compatibility list.
Replacement rear view mirror with a built in monitor for reverse camera and video input.
When not using the video input the mirror works as normal. This monitor comes with a universal window mount (M-K06) which securely attaches the monitor to the vehicles windscreen
Although we may have cables to fit the Double Din unit to your car there is either no facia conversion kit available, it is impossible to do or you will need professional engineers to adapt your dashboard.