Headunit fitting
Special adapters and interfaces for headunit fitting into specific cars
ISO extension harness with switch on 80cm extension for manually switching on radio without having the vehicles ignition on. Commonly used on camper vans and motor homes.
Suitable for almost any vehicle with a permanent 12v feed to the radio using standard ISO connections.
Retains the top screen on all Lexus RX (XU30) built between 2004 - 2006 and models built between 2007 - 2008 with navigation.
Retains use of the top screen for both navigation and air con visualisation after an after market radio has been fitted.
Momentary switch to retain and switch between the reverse and side cameras on the top screen of the Nissan Elgrand E51 with CARWINGS.
97mm diameter mounting hole required.
Smartphone/ Camera integration interface designed for Mercedes cars with NTG 5.0 OEM systems (2015 - 2019)
PLEASE NOTE: AUDIO IS DONE THROUGH THE CARS AUX-IN SYSTEM WHICH MUST BE ACTIVATED
PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description
Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.
This interface also allows vehicle settings and clock adjustment to be displayed on any aftermarket head unit with rear camera input.
Suitable for select Vauxhall, Chevrolet and Holden vehicle models.
PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description
Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.
This interface also allows vehicle settings and clock adjustment to be displayed on any aftermarket head unit with rear camera input.
PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description
Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.
This interface allows vehicle settings and clock adjustment to be displayed on any aftermarket head unit with rear camera input.
Suitable for Seat Ibiza, Leon and Arona car models
PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description
This interface allows the use of the Steering Wheel audio controls, Optical Parking Sensor Display And Climate Control Visualization when installing an aftermarket head unit.
Suitable for select Volkswagen vehicle models with original MIB/ PQ radio systems.
PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description
This interface will retain Steering controls and also provide optional input for reversing camera/ parking sensors (if applicable) and outputs for park brake, speed pulse, reverse gear and mute
Suitable for select Volkswagen vehicle models with original MIB II radio systems.
PLEASE NOTE: This interface will only retain basic features such as steering wheel controls on Single DIN radios
Multimedia Steering wheel control interface for various VW cars with select Kenwood models with the EXT/IF (UART) connector.
Includes a pre-wired CANbus interface to provide Ignition, Illumination, Steering controls, Reverse signal, Park Pilot screen retention, Climate control display if in car
This interface is compatible with the older style (48 pin) quadlock connector usually found on previous model variants of some Volkswagen vehicles.
PLEASE NOTE: Only compatible with select Kenwood models with the UART connector. These include Kenwood DMX8020DABS, DNX516DABS and DNX518DABS
Multimedia Steering wheel control interface for various VW cars with select Kenwood models with the EXT/IF (UART) connector
This interface is compatible with the newer style (52 pi Quadlock connector usually found on 2015 onwards model variants of some Volkswagen vehicles.
Includes a pre-wired CANbus interface to provide Ignition, Illumination, Steering controls, Reverse signal, Park Pilot screen retention, Climate control display if in car
PLEASE NOTE: Only compatible with select Kenwood models with the UART connector. These include Kenwood DMX8020DABS, DNX516DABS and DNX518DABS
Special adapter lead for the fitting of a Mercedes Audio 20 head unit into a vehicle with an original Audio 5 head unit.
Seat Ibiza (2014-2017) button relocation harness.
This is used to relocate the original hazard and passenger airbag buttons when fitting an aftermarket head unit
Suitable for Seat Ibiza (2014-2017) car models
PLEASE NOTE: A new button panel will need to be used with this harness.
Multimedia Steering wheel control interface for various VW cars with select Kenwood models with the UART connector.
Includes a pre-wired CANbus interface to provide Ignition, Illumination, Steering controls, Reverse signal, Park Pilot screen retention, Climate control display if in car
This interface is compatible with the older style quadlock connector usually found on previous model variants of some Volkswagen vehicles.
PLEASE NOTE: Only compatible with select Kenwood models with the UART connector. These include Kenwood DMX8020DABS, DNX516DABS and DNX518DABS
Multimedia Steering wheel control interface for various VW cars with select Kenwood models with the UART connector.
This interface is compatible with the newer style (2 PIN) Quadlock connector usually found on p model variants of some Volkswagen vehicles.
Includes a pre-wired CANbus interface to provide Ignition, Illumination, Steering controls, Reverse signal, Park Pilot screen retention, Climate control display if in car
PLEASE NOTE: Only compatible with select Kenwood models with the UART connector. These include Kenwood DMX8020DABS, DNX516DABS and DNX518DABS
Multimedia Steering wheel control interface for various VW cars with Pioneer AVIC- navigation models with the UART connector
PLEASE NOTE: Only compatible with Pioneer AVIC models
PDC display and Steering wheel control interface for various VW cars with Pioneer AVIC- navigation models with the UART connection
PLEASE NOTE: Only compatible with Pioneer AVIC- models
Wiring conversion cable for fitting the Pioneer EVO kit to a Renault Clio 2012-2019 with a OEM Autoradio Smartphone head unit.
This interface comes with a Pioneer patch lead included.
Only for use with the Renault Clio Pioneer EVO kit.
Steering Wheel Interface for fitting the Pioneer EVO kit to a Renault Clio 2012-2016 with a OEM R-Link navigation head unit.
This interface comes with a Pioneer patch lead included.
Only for use with the Renault Clio Pioneer EVO kit.
Replacement button assembly panel for Seat Ibiza cars, to be used when installing a new head unit in 2014-2017 model cars.
Replacement button assembly panel for Seat Ibiza cars, to be used when installing a new head unit in 2014-2017 model cars.
ALL SYMBOLS