Complete stereo upgrade fitting kit for a Renault Clio (2012 - 2019), custom made to fit a HU-PIO-EVO62DAB head unit seamlessly into the dash

Female ISO Lead harness (with Butt Connectors)

Allows you to connect bare Power and speaker wires to the Female ISO connector.

Useful for repairs and custom installs

ISO extension harness with switch on 80cm extension for manually switching on radio without having the vehicles ignition on. Commonly used on camper vans and motor homes.

Suitable for almost any vehicle with a permanent 12v feed to the radio using standard ISO connections.

This plug and play cable allows you to connect a Chinese aftermarket car radio with European ISO connectors to the cars wiring using the original connectors in the car.

This cable will retain the use of the steering wheel controls when fitting an aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

Fits most Honda cars made from 1998 onwards.

PLEASE NOTE: This kit is only suitable for aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

This plug and play cable allows you to connect an aftermarket head-units with resistive programmable steering controls to the cars wiring using the original connectors in the car.

This cable will retain the use of the steering wheel controls when fitting an aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

Fits most Mazda cars made from 2001 onwards.

PLEASE NOTE: This cable is designed for Chinese made head-units with resistive programming steering controls (KEY1, KEY2 or SWC1, SWC2) 

Nissan radio replacement adapter cable, allows the fitting of an aftermarket car stereo upgrade by adapting the original 10 and 6 pin Nissan connectors to standard aftermarket ISO connectors.

This cable will retain the use of the steering wheel controls when fitting an aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

This cable is mostly used in cars pre 2005. Check that the car has the twin 10 and 6 pin connectors.

PLEASE NOTE: This kit is only suitable for aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

Honda CRV 2007> Car Audio Steering wheel ISO cables allowing use of the original buttons when fitting an aftermarket car radio stereo upgrade. Provides power and speaker connections from the car.

This cable will retain the use of the steering wheel controls when fitting an aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

Fits most Suzuki cars made from 2000 onwards.

PLEASE NOTE: Only suitable for Honda CR-V models with original NAV type 2VNO

This kit is only suitable for aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

Audio cable for Honda Civic and CRV made after 2006, allowing use of the original buttons when fitting a Chinese aftermarket car radio stereo upgrade. Provides power and speaker connections from the car.

This cable will retain the use of the steering wheel controls when fitting an aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

PLEASE NOTE: This kit is only suitable for aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

This plug and play cable allows you to connect an aftermarket car radio with European ISO connectors to the cars wiring using the original connectors in the car.

This cable will retain the use of the steering wheel controls when fitting an aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

Fits most Hyundai cars made from 2008 onwards.

PLEASE NOTE: This kit is only suitable for aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

Adapter cable to connect various Volkswagen Group cars and vans to standard ISO connectors to enable the fitting of an aftermarket head unit.

This adapter harness is designed to adapt from the original new style quad lock connector in the dashboard of various Volkswagen, Audi, Seat and Skoda vehicles to standard aftermarket ISO connectors to allow the fitting of a new radio.

Does not provide CAN ignition or steering wheel controls.

Adapter cable to connect various Renault cars and vans to standard ISO connectors to enable the fitting of an aftermarket head unit.

This adapter harness is designed to adapt from the original 12 Pin connector in the dashboard of various Renault vehicles to standard aftermarket ISO connectors to allow the fitting of a new radio.

Only fits vehicles with an OEM radio fitted with 12 pin connector. Does not provide CAN ignition or steering wheel controls.

Adapter cable to convert Polaris Slingshot (2015 Onwards) to standard ISO connectors to enable the fitting of an aftermarket head unit.

This adapter harness is designed to adapt from the original 36 Pin connector in the dashboard to a standard aftermarket ISO connector to allow the fitting of a new radio.

Adapter cable to convert Fiat Ducato 8 (2021 Onwards) to standard ISO connectors to enable the fitting of an aftermarket head unit.

This adapter harness is designed to adapt from the original 12 Pin connector in the dashboard to a standard aftermarket ISO connector to allow the fitting of a new radio.

Only fits vehicles with an OEM radio fitted with 12 pin power and speaker connector (not U-Connect)

Adapter cable to connect various General Motors cars and trucks to standard ISO connectors to enable the fitting of an aftermarket head unit.

This adapter harness is designed to adapt from the original 44 Pin connector in the dashboard of various Chevrolet, Cadillac, Vauxhall, Opel, Holden and Saab vehicles to standard aftermarket ISO connectors to allow the fitting of a new radio.

Only fits vehicles with an OEM radio fitted with large 44 pin connector. Does not provide CAN ignition, steering wheel controls or illumination outputs.

Adapter cable to connect various MG cars to standard ISO connectors to enable the fitting of an aftermarket head unit.

This adapter harness is designed to adapt from the original 48 Pin quadlock connector in the dashboard of various MG (2009 onwards) vehicles to standard aftermarket ISO connectors to allow the fitting of a new radio.

Only fits vehicles with an OEM radio fitted with large 48 pin quadlock connector. Does not provide CAN ignition or steering wheel controls.

Adapter cable to connect various Proton cars to standard ISO connectors to enable the fitting of an aftermarket head unit.

This adapter harness is designed to adapt from the original 14 pin connector in the dashboard of early Proton vehicles to standard aftermarket ISO connectors to allow the fitting of a new radio.

Only fits vehicles with an OEM radio fitted with 14 pin connector.

Retains the top screen on all Lexus RX (XU30) built between 2004 - 2006 and models built between 2007 - 2008 with navigation.

Retains use of the top screen for both navigation and air con visualisation after an after market radio has been fitted.

Momentary switch to retain and switch between the reverse and side cameras on the top screen of the Nissan Elgrand E51 with CARWINGS.

97mm diameter mounting hole required.

Cable for retention of the original Subwoofer fitted to some versions of the 3rd Generation Honda CR-V (2007-2011) with original 2VN3 head unit.

2 channel high to Low Level adapter (FOR FRONT CHANNEL AMPLIFIERS AND INTERFACES) 

Includes a built in Ground Loop isolator to reduce electrical interference and on/off "Popping"

2 channel RCA Ground Loop Isolator (With level adjustment)

2 channel Low level Phono to Low Level RCA

Includes a built in Ground Loop isolator to reduce electrical interference and on/off "Popping" to amplifiers

Use the adjustment dials on the adapter box to match the output of the radio to the input of the amplifier.

2 channel high to Low Level adapter (FOR REAR CHANNEL AMPLIFIERS AND INTERFACES) 

Includes a built in Ground Loop isolator to reduce electrical interference and on/off "Popping"

4 channel High level ISO to Low Level RCA adapter

Converts speaker outputs to low level RCA/PHONO .

Ideal for connecting radios that do not  have pre outs or radios that have low voltage pre outs. To amplifiers.

Also includes ground loop isolators to prevent interference .

Has output level adjustments to match the required  input level  to the connected amplifier .

PLEASE NOTE: Not needed for head-units with 3v or greater RCA phono outputs 

4 channel RCA Ground Loop Isolator (With level adjustment)

Low level To Low Level Ground loop isolator.

Prevents interference when connecting amplifiers to the pre-outs of radios .

Has level adjustments to match the output of the interface to the input of the amplifier .

Patch lead for use with 20-XXX-SWC ISO steering wheel control cables to convert from 2 wire learning to 3.5mm jack.

Use with self learning programable aftermarket units like Blaupunkt, Grundig or Road Angle. Also for some Kenwood, JVC and Sony units using their "CUSTOM" setting for steering control input by resistive learning.

Only to be used with InCarTec 20-XXX-SWC series ISO steering wheel control cables

NOT FOR USE WITH PIONEER OR ALPINE RADIOS

Amplifier bypass cable for Range Rover Sport and Discovery III cars fitted with standard Harman/Kardon amplifier underneath the driver's seat. Allows you to connect a new aftermarket radio directly to the car's speakers after bypassing the original amplifier.
A new extra amplifier will be needed to keep the original sub-woofer. Sound to tweeters may be lost.
NOT FOR LOGIC 7 SYSTEMS

PLEASE NOTE: SUITABLE FOR SPEAKERS ONLY, TO BE USED IN CONJUNCTION WITH OUR 29-712 or 29-758 SWC INTERFACES ONLY

Amplifier bypass cable for Cadillac CTS 2003 - 2007 and Cadillac SRX 2004 - 2006
Allows you to connect a new aftermarket radio directly to the cars speakers after bypassing the original amplifier.

Needs to be used with part 10-149 to reach the length of the car from the radio to where the original amplifier is located.

Amplifier bypass cable for Porsche cars built after 2012 with PCM 3.0 and newer

Allows you to connect a new aftermarket radio directly to the cars speakers after bypassing the original amplifier which is under the front seat while retaining the original subwoofer and its dedicated amplifier.

Bulk pack of 10 Fakra DAB male to DAB SMB female antenna adapter cables (50cm)

Use to convert the original (Fakra DAB) antenna connector in a car to a female SMB (used on aftermarket head-units)

Fakra to DIN antenna adapter cable with 12v phantom power from a male bullet connection.

This antenna adapter cable adapts from the original Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade.

Twin fakra to DIN antenna adapter cable with 12v phantom power from a male bullet connection.

This antenna adapter cable adapts from the original twin fakra connectors in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade.

Bulk pack of 10 Double Fakra to Male DIN aerial antenna adapter cables (With 12v phantom power)

This antenna adapter cable adapts from the original Double Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade.

Double Fakra to DIN antenna adapter cable with 12v phantom power from a male bullet connection.

This antenna adapter cable adapts from the original Double Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade.

Isuzu D-Max antenna adapter to retain the original FM and DAB antennas. For 2021 onward (facelift) vehicles with amplified antenna. 
Also fits some later model Mazda, Honda and Suzuki cars without a separate DAB module and a combined FM and DAB antenna connection.

Isuzu D Max (2021>)

Interface to connect to the CAN ignition of certain cars and trucks from General Motors and provide ignition output as well as interfacing an NON-BOSE original amplifier.

This steering wheel control interface via a single wire output.

Suitable for certain Buick, Cadillac, Chevrolet, GMC, Hummer, Pontiac, Saturn and Suzuki models built between 2006 - 2020, see long description for compatibility.

NOT SUITABLE for retaining steering wheel controls on radios that us a 3.5mm jack (Pioneer, Sony, Alpine) or on Chinese/unbranded head units with 2 wire SWC interface (KEY1/KEY2) 

Interface to connect to the CAN ignition of certain cars and trucks from General Motors and provide ignition output as well as interfacing with the steering wheel controls and original amplifier.

This interface also includes subwoofer retention and a reverse signal, speed pulse and parking brake outputs.

Suitable for certain Buick, Cadillac, Chevrolet, GMC, Hummer, Pontiac, Saturn and Suzuki models built between 2006 - 2020, see long description for compatibility.

NOT SUITABLE for retaining steering wheel controls on Chinese/unbranded head units with 2 wire SWC interface (KEY1/KEY2) 

Interface to connect to the amplifier of a 2010 - 2015 Kia Sportage as well as interfacing with the steering wheel controls.

This interface also includes a reverse signal, speed pulse and parking brake outputs, along with retention for the OEM reverse camera and aux port.

MUST BE USED WITH PART 23-235

Suitable for Kia Sportage (SL) 2010 - 2015 with original OEM amplifier, including models with Infinity Sound Amplifier.

Interface to connect to the CAN ignition of certain cars and trucks from General Motors and provide ignition output as well as interfacing with the steering wheel controls and original amplifier.

This interface also includes subwoofer retention and a reverse signal, speed pulse and parking brake outputs.

Suitable for certain Chevrolet and GMC models built between 2012 - 2014 with original navigation only, see long description for compatibility.

NOT SUITABLE for retaining steering wheel controls on Chinese/unbranded head units with 2 wire SWC interface (KEY1/KEY2) 

Interface to connect to the CAN ignition of EU models of the Honda Civic and CRV (2012-2017) and provide ignition output as well as interfacing with the steering wheel controls and amplifier.

This interface also includes subwoofer retention and a reverse signal, speed pulse and parking brake outputs.

Suitable for European models of the Honda Civic (FK) (2012-2017) and Honda CR-V (2012-2017) with original OEM navigation.

NOT SUITABLE for retaining steering wheel controls on Chinese/unbranded head units with 2 wire SWC interface (KEY1/KEY2) 

Amplifier Interface compatible with various Hyundai and Kia vehicles built from 2012 onwards.

NOT USED AS A STAND ALONE PART

Only for use with a 23 series amplifier interface for Hyundai or Kia. Please see full description for which interfaces this is compatible with.

Interface to connect to the amplifier of a 2010 - 2015 Kia Sportage or Hyundai iX35 WITH ISO CONNECTIONS ON THE ORIGINAL RADIO as well as interfacing with the steering wheel controls.

This interface also includes a reverse signal, speed pulse and parking brake outputs, along with retention for the OEM reverse camera and aux port.

Suitable for Kia Sportage (SL) or Hyundai iX35 2010 - 2015 with original OEM amplifier and ISO connections, including models with Infinity Sound Amplifier.

Citroen/ Peugeot (2016 Onwards) AUX/USB conversion adapter cable

Cable to retain the cars original USB port and convert it to an aftermarket head-unit.

Toyota 2018 onwards USB retention Harness

Allows retention of the original USB port in the car when fitting an after market radio.

Fits select Toyota and Suzuki cars built after 2018

Use this cable to retain an original fitment camera when fitting a new head unit.

For Fiat, Alfa Romeo, Lancia and other Fiat Chrysler group vehicles built after 2014 with original reverse camera.

Use this cable to retain an original fitment camera when fitting a new head unit.

For General Motors, Chevrolet, Cadillac and GMC 2012 onwards cars and trucks with original equipment navigation and reverse camera.

Allows you retain the original OEM camera on mostly Japanese Domestic Market model Toyotas with 6v rear camera.

Suitable for original head units with 4 pin camera connector.

PLEASE NOTE: European and Japanese spec cars often have different head units - if your model was sold in both markets, please check the connections before ordering

Replacement steering control loom for Renault vehicles.

Allows connection directly from the stalk paddle to a steering control interface, this bypasses original equipment such as display units, tuner modules and amplifiers that carry the stalk signal which is lost when removing the original head unit.

PLEASE NOTE: To be used with 29-608 steering control interface when fitting Double DIN aftermarket units.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

Suitable for select BMW 3,5,7-Series and Mini models with a BMW round pin connection

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface allows use of cars original steering wheel buttons with a new audio system or navigation unit.

Suitable for BMW car models with K Bus data and Quadlock connector.

Also fits Range Rover III with BMW audio systems and Mini One and Cooper cars with the boost CD original radio.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit by adapting the original Toyota connectors to standard aftermarket ISO connectors.

Suitable for various Toyota car models

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Steering wheel control interface and adapter cable for Ford C-Max, Fiesta, Focus, Fusion, Galaxy, Kuga, Mondeo, S-Max and Transit vehicles to fit an aftermarket radio upgrade.

The interface and radio adapter cable is plug and play, it is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip and source buttons from the steering wheel with the new radio.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit in a Honda Civic (2006-2010), CR-V (2007 Onwards) and FR-V (2007-2009). Provides power and speaker connections from the car.

Works with CR-V cars with original standard head unit .

PLEASE NOTE: For Civic models with the air-con button on the original radio, this interface does not retain the use of the air con button and air con display, please use item 29-CTH02

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Provides power and speaker connections from the car along with sub output and amp turn on.

Suitable for Honda CR-V (2007-2011) car models fitted with 2VNO NAV units and an original subwoofer

PLEASE NOTE: Only suitable for Honda CR-V models with original NAV type 2VNO and original Subwoofer

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Steering wheel control interface and adapter cable for Nissan Navara D40, NV200, Pathfinder, Patrol and Qashqai cars with 6 function audio controls on the steering wheel and 20 pin connectors at the back of the radio. (Does not include the i button)

The interface and radio adapter cable is plug and play, it is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip, phone and source buttons from the steering wheel with the new radio.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.

Suitable for Mazda cars made after 2000 and Ford Ranger vehicles from 1999-2011.

PLEASE NOTE: For cars with BOSE sound systems please use 20-273

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Includes ISO power to connect the car to the aftermarket head-unit. 

Suitable for Proton Gen2 (2004-2012) Persona (2007-2015) and Satria Neo (2006-2015)

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit. Includes Phone commands for compatible Bluetooth head units.

Suitable for various Hyundai and Kia car models

PLEASE NOTE: This interface is not suitable for cars with an original amplifier

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit. Includes ISO power and speaker wiring to connect the car to the aftermarket head-unit.

Suitable for Kia Picanto (TA) 2011 - 2017 with OEM Satellite Navigation.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Steering wheel control interface for Range Rover Sport cars 2005-2009 that will also allow the original head unit to remain connected and relocated so the original display (navigation) above the radio will continue to work.
This interface will retain the use of the steering wheel audio controls.

PLEASE NOTE: This interface is designed for Range Rover Sport (L320) 2005-2009 car models with basic audio and separate screen above the original radio.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Includes ISO power and speaker wiring to connect the car to the aftermarket head-unit

Suitable for Renault Trafic, Nissan Primastar (2006 - 2014) and Vauxhall Vivaro (2011 - 2014)

PLEASE NOTE: This interface includes PHONE commands for compatible Bluetooth head-units

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Steering wheel control interface and adapter cable for Ford Transit, Transit Custom and Transit Connect vans without a separate  display above the radio.

The interface and radio adapter cable is plug and play, it is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip and source buttons from the steering wheel with the new radio.

PLEASE NOTE: FOR TRANSIT RADIOS WITHOUT THE DISPLAY ON TOP OF THE DASH

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit. Includes ISO power and speaker wiring to connect the car to the aftermarket head-unit.

Suitable for MG MG3 (2013-2018) pre-facelift car models

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Includes ISO power to connect the car to the aftermarket head-unit. 

Suitable for Lexus RX350 and RX400H 2003 - 2009 with Mark Levinson Sound

PLEASE NOTE: This interface includes PHONE commands for compatible Bluetooth head-units

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Includes ISO power and speaker wiring to connect the car to the aftermarket head-unit

Suitable for Isuzu D Max and MU-X (2020 onwards) and Mazda BT-50 (2020 onwards)

PLEASE NOTE: This interface includes PHONE commands for compatible Bluetooth head-units

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit, as well as retaining the use of the original OEM camera.

Suitable for Subaru Forester (SH) (2008-2012) with original Kenwood Navigation head unit.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Includes ISO power to connect the car to the aftermarket head-unit. 

Suitable Fiat Ducato 2020-2022 with original Fiat Navigation.

PLEASE NOTE: This interface includes PHONE commands for compatible Bluetooth head-units

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Includes ISO power to connect the car to the aftermarket head-unit. 

The interface also provides a breakout cable to retain the top screen

Suitable for Nissan Elgrand E51 (Series 3) with CARWINGS.

PLEASE NOTE: This interface includes PHONE commands for compatible Bluetooth head-units

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

DAF CF, XF (2017 Onwards) ISO steering wheel control adapter interface. Retains the use of the audio steering wheel controls with an aftermarket head unit.

PLEASE NOTE: After installation, radio information on the cockpit display (eg. radio station names, RDS information) will be lost. If a Bluetooth module is fitted in the vehicle, the phone buttons will still function correctly.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

This CANbus interface connects to the original 24+54 pin connectors in the original system to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also retains the original phone buttons, as well as the USB, AUX and reversing camera (if the vehicle is equipped)

Suitable for Ford Ranger (2015-2020) cars with original SYNC 3 audio systems with small display. Also fits Ford Ranger US models (2019-2020)

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

CAN-Bus  Steering Wheel Control Interface for Fiat, Citroen, Peugeot and Vauxhall vehicles with VDO original stereo and Mini ISO connector. 

Suitable for various Fiat, Peugeot and Vauxhall vehicles with ISO connectors behind the radio to retain the use of the steering wheel controls and provide CANbus outputs.

PLEASE NOTE: Not suitable for UConnect Systems

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel control interface allowing the use of the original buttons on your steering wheel when installing a new aftermarket head-unit.

Suitable for select Fiat vehicles with OEM fitted Type 250VP1/VP2 radios and the newer larger style connector behind the radio.

PLEASE NOTE: A technical knowledge of car audio fitting is necessary for the installation of this product

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

Suitable for Fiat Ducato 2021 onwards with ISO connections 

This interface also includes extensions for speed pulse and reverse gear outputs from the fuse box.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Steering wheel control interface allowing the retention of select steering wheel controls when installing an aftermarket head unit.

This interface also retains climate control features to the original screen and provides outputs for Speed Pulse and Amp remote turn on. 

Suitable for Honda Civic (2006-2011) car models.

PLEASE NOTE: This product is only compatible for hatchback vehicles without navigation only.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Hyundai steering wheel control interface for Hyundai vehicles without CAN-Bus.

This Steering control interface allows you to retain the use of the audio steering control buttons when upgrading to an aftermarket head unit. 

Suitable for digitally amplified Hyundai Santa-Fe (2015-2018) car models

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface also retains the use of the 360 panoramic camera system and provides outputs for parking brake, speed pulse and reverse.

Will also retain OEM amplifier and factory phone buttons (if equipped)

Suitable for Mitsubishi Montero Sport, Pajero Sport and Shogun Sport (2016-2019) car models

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface also retains the use of the 360 panoramic camera system and provides outputs for parking brake, speed pulse and reverse.

Will also retain OEM amplifier and factory phone buttons (if equipped)

Suitable for Mitsubishi Outlander (2014-2018) and Pajero (2016-2018) car models

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface allows you to retain the steering wheel controls and OEM phone buttons (if equipped) when replacing the OEM radio with a new aftermarket head unit.

Suitable for various Nissan vehicle models

Please see long description for full vehicle compatibility 

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Steering control interface to retain the use of the audio steering control buttons in select Nissan (2014-2017) vehicles.

PLEASE NOTE: This interface is only compatible with Qashqai Acenta model variants. This interface has a 20 pin connector and a 24 pin connector.

These cars have various different set-ups behind the radio, please remove the radio and check if you have a 24/32 or 40 pin connector, before purchasing a solution.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface will also retain OEM Phone Buttons, AUX input and reverse camera (If equipped)

Suitable for Subaru Impreza (2017-2021) car models

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface also retains the use of the 360 panoramic camera system and provides outputs for parking brake, speed pulse and reverse gear.

Suitable for various Toyota models from 2014-2019

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface also retains the use of the 360 panoramic camera system and provides outputs for parking brake, speed pulse and reverse gear.

Suitable for Toyota RAV4 (2019 Onwards) with amplified sound systems

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Steering Wheel Control/ Infoadapter interface for select Alfa Romeo vehicle models with UConnect.

This interface allows the use of the Steering Wheel audio controls, clock adjustment and vehicle settings when installing an aftermarket head unit.

Fits Alfa Romeo Giulietta and Mito models with a 5" UConnect original radio.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface also allows vehicle settings and clock adjustment to be displayed on any aftermarket head unit with rear camera input.

Suitable for select Vauxhall, Chevrolet and Holden vehicle models.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface will also allow vehicle information such as clock adjustment and vehicle settings to be displayed on the new aftermarket head unit.

Suitable for Fiat 500, 500L and Ducato (2014-2021) vehicle models

PLEASE NOTE: This interface will not allow retention of the original windscreen camera

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface will also retain vehicle settings and parking sensor information, as well as providing a rear camera input.  

Suitable Jeep Renegade (2015-2021) car models with original Uconnect systems

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface also allows vehicle settings and clock adjustment to be displayed on any aftermarket head unit with rear camera input.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface allows vehicle settings and clock adjustment to be displayed on any aftermarket head unit with rear camera input.

Suitable for Seat Ibiza, Leon and Arona car models

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

This interface allows the use of the Steering Wheel audio controls, Optical Parking Sensor Display And Climate Control Visualization when installing an aftermarket head unit.

Suitable for select Volkswagen vehicle models with the white MFD display. Also compatible with Fender OEM Amplified Systems.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

This interface allows the use of the Steering Wheel audio controls, Optical Parking Sensor Display And Climate Control Visualization when installing an aftermarket head unit.

Suitable for select Volkswagen vehicle models with original MIB/ PQ radio systems.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

This interface will retain Steering controls and also provide optional input for reversing camera/ parking sensors (if applicable) and outputs for park brake, speed pulse, reverse gear and mute

Suitable for select Volkswagen vehicle models with original MIB II radio systems.

PLEASE NOTE: This interface will only retain basic features such as steering wheel controls on Single DIN radios

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface also allows vehicle settings and clock adjustment to be displayed on any aftermarket head unit with rear camera input.

Suitable for Vauxhall Viva and Opel Karl vehicle models.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface allows vehicle settings and clock adjustment to be displayed on any aftermarket head unit with rear camera input

Suitable for Vauxhall Astra K and Holden Astra BK (2015-2021) car models

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new after market head-unit. 
Includes audio controls, phone answer and ignition supply as well as speed pulse, parking and reverse signal if needed for aftermarket Navigation systems
This interface will also retain date, time, temperature and trip display settings.
Suitable for Vauxhall Vivaro (2011-2014) vehicle models

PLEASE NOTE: THE ORIGINAL DISPLAY MUST REMAIN IN PLACE FOR THIS TO WORK

PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description

Steering wheel control interface and radio adapter cable for various BMW and Mini cars. It is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip, source and phone buttons from the steering wheel with the new radio.

The CANbus interface will also provide ignition, illumination, speed pulse, reverse gear and handbrake output signals to the new stereo.

Multimedia Steering wheel control interface for various VW cars with select Kenwood models with the EXT/IF (UART) connector.

Includes a pre-wired CANbus interface to provide Ignition, Illumination, Steering controls, Reverse signal, Park Pilot screen retention, Climate control display if in car

This interface is compatible with the older style (48 pin) quadlock connector usually found on previous model variants of some Volkswagen vehicles.

PLEASE NOTE: Only compatible with select Kenwood models with the UART connector. These include Kenwood DMX8020DABS, DNX516DABS and DNX518DABS 

Multimedia Steering wheel control interface for various VW cars with select Kenwood models with the EXT/IF (UART) connector

This interface is compatible with the newer style (52 pi Quadlock connector usually found on 2015 onwards model variants of some Volkswagen vehicles.

Includes a pre-wired CANbus interface to provide Ignition, Illumination, Steering controls, Reverse signal, Park Pilot screen retention, Climate control display if in car

PLEASE NOTE: Only compatible with select Kenwood models with the UART connector. These include Kenwood DMX8020DABS, DNX516DABS and DNX518DABS 

PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description

CANbus steering wheel control interface for Mercedes CLS W219, E Class W211 and SLK R171 cars with original Mercedes NTG1 head units.
Gives CANbus Ignition outputs and retains steering wheel controls.
The CANbus interface will also give out CAN ignition, speed pulse and reverse gear outputs.

PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description

CANbus steering wheel control interface for various Mercedes cars.
Gives CANbus Ignition outputs and retains steering wheel controls.
The CANbus interface will also give out CAN ignition, speed pulse, reverse gear and hand brake signals.

PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description

CANbus steering wheel control interface for select Nissan vehicles (2013 Onwards)

This interface maintains the use of audio steering wheel controls, adapts from original vehicle to after market radio and provides CANbus outputs.

PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description

CANbus steering wheel control interface for Citroen and Peugeot cars with Quadlock connectors behind the radio.
This interface will also allow the steering wheel controls to access the display screen menu.
The CANbus interface will also give out CAN ignition, speed pulse, reverse gear and hand brake signals.

PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description

CANbus steering wheel audio control and CANbus interface for select Renault vehicles with either "Update List" radios and a seperate display above the original radio.

This interface will retain the use of the steering wheel control buttons when fitting an after market head unit, as well as providing CANbus outputs, ignition, illumination, speed pulse, handbrake and reverse gear.(depends on vehicle)

The CANbus steering control signal runs through the display or original navigation unit, if the display or navigation unit is removed this interface will not function.

PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description

Interface to retain the use of the steering wheel controls in various Volkswagen vehicles including Amarok, Beetle, Caddy and Transporter T6 (WITH NEW STYLE QUADLOCK) This is a new style Quadlock connector used on select VW vehicles. This can be identified by the 2 larger pins In the corner of the connector. Comes supplied with 21-139 double fakra antenna adapter.

PLEASE NOTE: DOES NOT RETAIN ANY MULTIFUNCTION DISPLAY INFORMATION PLEASE USE ONE OF OUR DISPLAY RETENTION FITTING KITS (FK-699-T6-DMX02, FK-699-T6-ILX) TO ACHIEVE THIS

Patch cable set to connect a UNICAN interface between an after market head unit and the steering wheel controls.

Can be used with Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive learning head units with either two wires or a 3.5mm jack.

This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony or Zenec Head-units.

CANbus steering wheel control interface for Iveco Daily 2014 onwards with Delphi DAB original head unit and Fiat Ducato 2021 onwards with ISO connections and CAN steering wheel controls.

This interface uses ISO connectors behind the radio to retain the use of the steering wheel controls and provide CANbus outputs. Stops original display flashing once the correct settings have been made.

PLEASE NOTE:THIS IS NOT A DIY PRODUCT! It should only be fitted be experienced 12V engineers.

Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket version

Fits Audi A4 (B7) (2005-2008), A4 Cabriolet (2001-2009) and Seat Exeo (3R5) (2008-2013) car models

A removable pocket is included for Single DIN installation.

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

The fascia uses side fixing brackets so no radio cage is required.

Fits Nissan Rogue 2008 - 2011 (pre-facelift) car models 

COLOUR: MATT BLACK

Replacement FLUSH FIT car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket version

This FLUSH FIT fascia makes it easier to adjust the fascia to the new aftermarket radio, making for a more professional finish

Fits various Volkswagen, Seat and Skoda car models

A removable pocket is included for Single DIN installation.

COLOUR: MATT BLACK

Replacement FLUSH FIT car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket version

This FLUSH FIT fascia makes it easier to adjust the fascia to the new aftermarket radio, making for a more professional finish

Fits various Volkswagen, Seat and Skoda car models

A removable pocket is included for Single DIN installation.

COLOUR: GLOSS BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

Fits Mercedes CLK (C209) facelift (2006-2009) car models and CL 2006 facelift

A removable pocket is included for Single DIN installation.

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket version

Fits Mercedes CLK (C209) facelift (2006-2009) car models

A removable pocket is included for Single DIN installation.

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a single DIN aftermarket version

Fits Toyota Hilux (2005-2010) car models

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a single or double DIN aftermarket version.

Fits Nissan 350Z (2006 - 2010) car models.

A frame with a pocket is provided for single DIN installation.

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

This fascia is a basic panel with a small pocket and a single DIN slot, it doesn't provide fixing points for the new radio or pocket.

Fits Proton Impian and Waja 2000 - 2011 car models 

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

This fascia is a basic panel with a small pocket and a single DIN slot, it doesn't provide fixing points for the new radio or pocket.

Fits Proton Savvy 2005 - 2013 car models 

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Double or Single DIN aftermarket version

Fits Honda Legend 1995-2004 and Acura RL 1996-2003 vehicle models without OEM satellite navigation

COLOUR: MATT BLACK

Suitable for Renault Clio (2012-2019 car models) with an OEM Autoradio Sound System

COLOUR:  MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Single or Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio..

Fits Renault Express (Kangoo Express) 2020 onwards vehicle models.

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

The fascia comes with side fixing brackets, so no fitting cage is required.

Fits Hyundai Accent (2010 - 2018) car models 

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Double or Single DIN aftermarket version

Fits Kia Optima 2014-2015 without OEM satellite navigation

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

The fascia uses the original radio brackets to fit, so no fitting cage is required.

Fits Proton Satria Neo (2006 - 2015) car models 

COLOUR: SILVER

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

The fascia uses side fixing brackets so that no radio cage is needed.

Fits Kia Optima 2010 - 2014 (RIGHT HAND DRIVE ONLY) vehicle models.

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

The fascia uses the cage supplied with a single DIN radio to fit.

Fits Proton Gen2 (2004 - 2012) and Persona (2007 - 2015) car models 

COLOUR: SILVER

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

Fits Nissan Pulsar (J11) 2014 - 2018 vehicles

COLOUR:  GLOSS BLACK

(matt black around vents)

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

The fascia uses the original radio brackets or alternatively 50-673 universal side brackets can be used.

Fits MG GS 2015 -2019 car models 

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

The fascia uses the original radio brackets so no radio cage is required. Use with 50-282 Toyota side fixing bars,

Fits Toyota Hilux 2016 onwards (RHD only) vehicle models.

COLOUR: GLOSS BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

The fascia uses side fixing brackets so that no radio cage is needed. It also comes with replacement central locking and hazard switches, and loom extension to connect them

Fits Mazda BT-50 (UP/UR) 2011 - 2017 models 

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

The fascia uses side fixing brackets so that no radio cage is needed.

Fits Volkswagen Touareg Mk2 2010 - 2014 vehicle models.

COLOUR: GLOSS BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

The fascia uses the original radio brackets and provides short attached side brackets to modify to fit the new head unit

Fits MG MG6 2009-2016 car models 

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

Fits Vauxhall VXR8, Holden Commodore VF and Chevrolet SS vehicles built between 2013 and 2017.

COLOUR: MATT BLACK

PLEASE NOTE: This is a special product order which we don't stock. Please email our sales team for availability

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

Fits Nissan Elgrand E51 Series 1 (2002-2003) vehicles

COLOUR: MATT BLACK

Fits Renault Clio (2012-2019) car models with OEM Autoradio Smart Phone Sound System Only

COLOUR:  GLOSS BLACK

Fits Renault Twingo (2014 onwards) car models with OEM R and Go Smart Phone docking Sound System Only

COLOUR:  MATT BLACK

This fascia uses plastic side fixing brackets with a slim finishing trim so no cage is needed.

Suitable for the following vehicle models:

Daihatsu Materia & Daihatsu Coo (2007 - 2013)

Toyota bB (2005 - 2016)

Subaru Dex (2007 - 2012)

COLOUR: GREY

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

Fits Suzuki Jimny (2018 onwards) vehicles

COLOUR: GLOSS BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

This fascia uses metal side fixing brackets with a slim finishing trim so no cage is needed.

Suitable for Seat Ibiza and Seat Arona (2017 Onwards) vehicle models.

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

Fits Volvo XC60 2008 - 2016 RIGHT HAND DRIVE ONLY

ONLY FITS SHALLOW MOUNT RADIOS

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

The fascia is flush fit, making it easier to adjust the fascia to the new aftermarket radio, making for a more professional finish

This fascia uses the original radios mounting brackets along with 50-282 Toyota side bars, no cage is needed.

Fits Toyota Alphard AH10 2002-2008 (Hybrid models with the larger OEM Navigation system)

COLOUR: SILVER

Fits Kia Rio (2017 Onwards) car models 

COLOUR: MATT BLACK

Fits Ssangyong Rodius (2004-2013) car models 

COLOUR: MATT BLACK

Fits Kia Picanto (2017 Onwards) car models without original touch screen radio.

COLOUR: PIANO BLACK

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.on

Fits Chrysler Ypsilon (2011-2015) and Lancia Ypsilon (2011-2021) car models

COLOUR: PIANO BLACK

Side fixing car radio fascia panel adapter with side fixing brackets to allow the fitting of an aftermarket Double DIN stereo upgrade in various Vauxhall cars.

This fascia kit gives a professional flush finish to the installation, and doesn't require a radio cage

Fits Vauxhall Corsa D, Astra H and Zafira B car models.

COLOUR: CHARCOAL METALLIC

Side fixing car radio fascia panel adapter with side fixing brackets to allow the fitting of an aftermarket Double DIN stereo upgrade in various Vauxhall cars.

This fascia kit gives a professional flush finish to the installation, and doesn't require a radio cage

Fits Vauxhall Corsa D, Astra H and Zafira B car models.

COLOUR: MATT SILVER

Complete replacement car audio fascia to enable you to change the original radio in the car to a Single DIN or Double DIN aftermarket version
This fascia comes with side fixing brackets so no additional fitting cage is required. A removable pocket is supplied for Single DIN installations.

Fits Subaru Impreza 2017 onwards car models with touchscreen original entertainment system.

COLOUR: GLOSS BLACK

Complete replacement car audio fascia to enable you to change the original radio in the car to a Single DIN or Double DIN aftermarket version
This fascia comes with side fixing brackets so no additional fitting cage is required. A removable pocket is supplied for Single DIN installations.

Fits Holden Astra BL Sedan (2016 - 2020) and Chevrolet Cruze (2016 - 2019) car models with MyLink

COLOUR: GLOSS BLACK

Complete replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version
This fascia comes with side fixing brackets so no additional fitting cage is required. 

Fits Vauxhall Viva and Opel Karl built between 2015 and 2017 with three air vent bars below the hazard switch

COLOUR: GLOSS BLACK

Complete replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version
This fascia comes with side fixing brackets so no additional fitting cage is required. 

Fits Vauxhall Viva and Opel Karl built between 2017 and 2019 with two air vent bars below the hazard switch

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

The fascia is flush fit, making it easier to adjust the fascia to the new aftermarket radio, making for a more professional finish

This fascia includes side fixing brackets so no fitting cage is required 

Fits Audi TT 8J (2006-2014) car models

COLOUR: MATT BLACK

Renault Clio IV (2012 Onwards) fascia adapter panel.

This fascia panel adapts the OEM original radio on select Renault Clio IV (2012 Onwards) car models to allow you to fit the Pioneer Evo Renault Clio Fitting kit 

PLEASE NOTE: This fascia adapter is only needed on the 1-DIN Autoradio and R-Link Display radios when fitting the Pioneer Evo Renault Clio Fitting kit  

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN or Double DIN aftermarket version

Fits Toyota Yaris/ Vitz car models 2017-2020

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN or Double DIN aftermarket version

Fits Toyota Yaris/ Vitz car models 2017-2020

COLOUR: SILVER

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

Fits Fiat 500 2016 - 2021 (With original U-Connect 5" head unit) car models 

COLOUR: GLOSS BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN  aftermarket version

Fits Renault Koleos 2006 - 2015

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

Fits Fiat 500 2016 - 2021 (With original U-Connect 7" head unit) car models 

COLOUR: GLOSS BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN or Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

Fits Chrysler Delta and Lancia Delta (2008-2014) car models

COLOUR: SILVER

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

The fascia uses the original radio brackets to fit the new head unit.

Fits MG MG3 2013-2018 car models 

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

Fits Daihatsu Sirion 2004-2015, Subaru Justy 2007-2011, Perodua Myvi 2005-2011 and Toyota Passo 2004-2011 car models 

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

The fascia is flush fit, making it easier to adjust the fascia to the new aftermarket radio, making for a more professional finish

Includes side fixing brackets so no fitting cage is required. 

Fits Chevrolet Trax (2012-2017) and Holden Trax TJ (2013-2017) car models 

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

Fits Toyota Urban Cruiser (2009-2014) Toyota iST (2007-2016) and Scion XD (2007-2014) car models 

COLOUR: SILVER

PLEASE NOTE: Not suitable for models without factory radio

FOR LEFT HAND DRIVE MODELS ONLY!

Replacement audio fascia to enable you to change the original radio in the vehicle to a Single/ Double DIN aftermarket version

This fascia uses side fixing brackets so no cage is needed.

A pocket is provided for Single DIN installation

Fits Nissan NV200 (2013 Onwards) models (WITHOUT FACTORY NAVIGATION)

Also fits Chevrolet City Express Van (2015 Onwards)

COLOUR: MATT BLACK

Double DIN fascia adapter panel for Citroen C1, Peugeot 108 and Toyota Aygo cars from 2014 onwards.

Colour: Piano Black

PLEASE NOTE: This fascia fits 7 inch head units with a maximum depth of 150mm 

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

Suitable for Citroen C1, Peugeot 108 and Toyota Aygo cars from 2014 onwards.

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

Suitable for Citroen C1, Peugeot 108 and Toyota Aygo cars from 2014 onwards.

COLOUR: ANTHRACITE

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

The fascia is flush fit, making it easier to adjust the fascia to the new aftermarket radio, making for a more professional finish

Includes side fixing brackets so no fitting cage is required. Kit also includes the hole for the 'Start/Stop' button where fitted and a blanking plug if it is not.

Fits Kia Picanto - second generation (TA) 2011-2017 vehicle models

COLOUR: MATT BLACK

PLEASE NOTE: This fascia only fits Right Hand Drive vehicles

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

Fits Fiat 500 2016 - 2021 (With original U-Connect 5" head unit) alternative part to 50-625

COLOUR: GLOSS BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

The fascia is flush fit, making it easier to adjust the fascia to the new aftermarket radio, making for a more professional finish

Includes side fixing brackets so no fitting cage is required. 

Fits Audi R8 (2007-2015) car models

COLOUR: MATT BLACK

PLEASE NOTE: FOR RIGHT HAND DRIVE MODELS ONLY, FOR LEFT HAND DRIVE PLEASE USE 50-659-LHD

Universal Side Fixing Brackets for Double DIN Car Radio Stereo Fascia.

Will fit a number of different fascias and have has cut outs to fit most Double DIN radios. Se long description for dimensions.

SOLD AS A PAIR

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version.

This fascia fits Mitsubishi Eclipse Cross ES (2018-2020) vehicles. The size is 172mmx98mm, please check that this matches the dimensions of your OEM radio.

This fascia comes complete with side fixing brackets so there is no need for an additional cage

COLOUR: GLOSS BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

Fits Volkswagen Crafter (2006-2016) models

COLOUR: MATT BLACK

PLEASE NOTE: For Single DIN installation please use 50-257

Volkswagen, Seat and Skoda car radio fascia adapter panel to allow the fitting of an aftermarket Double DIN stereo upgrade.

The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.

The fascia adapter panel takes a 113mm high cage, this is the size of cages supplied with all the major brand head unit manufactures. If a cage is needed, we sell a matching cage with part number 51-013.

Suitable for fitting various Volkswagen, Seat and Skoda cars.

COLOUR: MATT BLACK

This fascia has Side fix brackets so no fitting cage is required

Fits Kia Sportage (2005-2008) Rio (2006-2009) and Hyundai Accent (2006-2009) car models

COLOUR: MATT BLACK

Complete replacement car audio fascia to enable you to change the original radio in the car to a Single DIN or Double DIN aftermarket version
This fascia comes with side fixing brackets so no additional fitting cage is required. A removable pocket is supplied for Single DIN installations.

Fits Hyundai IX35 (2010 - 2015) and Tucson (2009 - 2015) car models with navigation or 4.3" touch screen

COLOUR: MATT BLACK

This fascia is supplied with a fitting cage so no additional fitting cage is required. The fascia adapter will give a flush mount and professional appearance to the installation.

The fascia is designed to fit various Land Rover car models (Please see long description for full compatibility)

COLOUR: MATT BLACK

Car radio fascia adapter panel to allow the fitting of an aftermarket Single or Double din car radio upgrade.

The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.

This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel.

A pocket is also provided for single DIN installation.

The fascia is designed to Toyota Auris (2015 - 2019) car models

COLOUR: PIANO BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

This fascia is supplied with a 103mm fitting cage so no additional fitting cage is required. The fascia adapter will give a flush mount and professional appearance to the installation.

The fascia is designed to fit various Ford car models with a 6000CD Oval radio (Please see long description for full compatibility)

COLOUR: METALLIC BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel.

Fits the following Mercedes cars:

CL-Class (C215) (2002-2006) car models (WITH ORIGINAL COMMAND 2.0 RADIOS)

S-Class (W220) (2002-2006) car models (WITH ORIGINAL COMMAND 2.0 RADIOS)

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel.

Fits the following Mercedes cars:

CL-Class (C215) (2002-2006) car models (WITH ORIGINAL COMMAND 2.0 RADIOS)

S-Class (W220) (2002-2006) car models (WITH ORIGINAL COMMAND 2.0 RADIOS)

COLOUR: WOOD EFFECT

Complete replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia comes with side fixing brackets so no additional fitting cage is required.

Fits Suzuki Alto and Mazda Carol 2009-2014 (Japanese domestic market models only)

COLOUR: DARK GREY

Car radio fascia adapter panel to allow the fitting of an aftermarket double DIN car radio upgrade on a BMW 3-Series (E46) car model from 1999 to 2006

This fascia relocates the factory climate control and switches for LHD vehicles with a five switch panel opening, reducing the modification and labour time in comparison to other BMW fascia alternatives.

PLEASE NOTE: Although this fascia is Left Hand Drive (LHD) the radio surround, brackets and heater box modification panels will work on Right Hand Drive 3-Series BMW models.

Modification to the factory heater box is required to fit a unit with a double DIN chassis. We recommend this is done by a skilled car audio technician!

COLOUR: GLOSS BLACK

This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel.

Suitable for fitting Volkswagen Crafter (2017 onwards) vehicle models

COLOUR: MATT BLACK

PLEASE NOTE: This fascia has maximum mounting depth for the aftermarket radio of 55mm

Seat Ibiza (2014-2017) button relocation harness.

This is used to relocate the original hazard and passenger airbag buttons when fitting an aftermarket head unit

Suitable for Seat Ibiza (2014-2017) car models

PLEASE NOTE: A new button panel will need to be used with this harness.

Multimedia Steering wheel control interface for various VW cars with select Kenwood models with the UART connector.

Includes a pre-wired CANbus interface to provide Ignition, Illumination, Steering controls, Reverse signal, Park Pilot screen retention, Climate control display if in car

This interface is compatible with the older style quadlock connector usually found on previous model variants of some Volkswagen vehicles.

PLEASE NOTE: Only compatible with select Kenwood models with the UART connector. These include Kenwood DMX8020DABS, DNX516DABS and DNX518DABS 

Complete fitting kit to install a single DIN head unit and retain the original steering wheel controls in BMW 1,3 and Z4 Series cars.

Complete stereo upgrade fitting kit to install a Single DIN aftermarket radio in various Volkswagen cars

This head unit fitting kit includes:

- Double Fakra to DIN aerial adapter (Phantom Power) with Bullet connector (21-139K)

- Quadlock to ISO radio adapter harness, with CANbus ignition (20-156-IGN)

- Single DIN flush fit fascia adapter with side fixing brackets (50-172)

PLEASE NOTE: DOES NOT RETAIN STEERING WHEEL CONTROLS

Complete stereo upgrade fitting kit to install a Single DIN aftermarket radio in various Volkswagen cars

Fits cars with original RCD300, RCD500 or RNS MFD-2 radios

This head unit fitting kit includes:

- Twin Fakra antenna adapter (12v Phantom power) with bullet connection (21-128K)

- Quadlock to ISO radio adapter harness, with CANbus ignition (20-156-IGN)

- Single DIN fascia adapter with removable pocket (50-172)

Complete stereo upgrade fitting kit to install a Single DIN aftermarket radio in various Volkswagen cars with new (2015 onwards) style quadlock connection.

This head unit fitting kit includes:

- Double Fakra to DIN aerial adapter (Phantom Power) with Bullet connector (21-139K)

- Quadlock to ISO radio adapter harness, with CANbus ignition (20-186-IGN)

- Single DIN fascia adapter with removable pocket (50-172)

PLEASE NOTE: DOES NOT RETAIN STEERING WHEEL CONTROLS

Complete stereo upgrade fitting kit to install a single DIN aftermarket radio in various Volkswagen cars (WITH ORIGINAL RCD210 RADIO HEAD UNITS)

This head unit fitting kit includes:

- Fakra to DIN antenna adapter cable (12v phantom) with bullet connection (21-123K)

- Radio replacement steering wheel adapter interface (49-VW-01)

- Universal SWC Patch Lead (49-025)

- Fascia adapter panel (50-172)

Complete stereo upgrade fitting kit to install a single DIN aftermarket radio in various Volkswagen cars (WITH ORIGINAL RCD210 RADIO HEAD UNITS)

This head unit fitting kit includes:

- Fakra to DIN antenna adapter cable (12v phantom) (21-123)

- Radio replacement steering wheel adapter interface (29-UC-050-VW1)

- Universal patch lead set for steering control interface (29-UCCAB-SET)

- Fascia adapter panel (50-172)

Complete stereo upgrade fitting kit to install a SIngle DIN aftermarket radio in various Volkswagen cars

This head unit fitting kit includes:

- Double Fakra to DIN aerial adapter (Phantom Power) with Bullet connector (21-139K)

- Radio replacement steering wheel adapter interface (49-VW-01)

- Universal SWC Patch Lead (49-025)

- Single DIN fascia adapter with removable pocket (50-172)

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete stereo upgrade fitting kit to install a SIngle DIN aftermarket radio in various Volkswagen cars

This head unit fitting kit includes:

- Double Fakra to DIN aerial adapter (Phantom Power) (21-139)

- Radio replacement steering wheel adapter interface (29-UC-050-VW1)

- Universal patch lead set for steering control interface (29-UCCAB-SET)

- Single DIN fascia adapter with removable pocket (50-172)

Complete stereo upgrade fitting kit to install a Single DIN aftermarket radio in various Volkswagen cars

Fits cars with original RCD300, RCD500 or RNS-MFD-2 radios

This head unit fitting kit includes:

- Twin Fakra antenna adapter (12v Phantom power) with bullet connection (21-128K)

- Radio replacement steering wheel adapter interface (49-VW-01)

- Universal SWC Patch Lead (49-025)

- Single DIN fascia adapter with removable pocket (50-172)

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete stereo upgrade fitting kit to install a Single DIN aftermarket radio in various Volkswagen cars

Fits cars with original RCD300, RCD500 or RNS-MFD-2 radios

This head unit fitting kit includes:

- Twin Fakra antenna adapter (12v Phantom power) (21-128)

- Radio replacement steering wheel adapter interface (29-UC-050-VW1)

- Universal patch lead set for steering control interface (29-UCCAB-SET)

- Single DIN fascia adapter with removable pocket (50-172)

Complete stereo upgrade fitting kit to install a Single DIN aftermarket radio in various Volkswagen cars

Suitable for cars with Highline specification or an Amplifier.

This head unit fitting kit includes:

- Double Fakra to DIN aerial adapter (Phantom Power) with Bullet connector (21-139K)

- Radio replacement steering wheel adapter interface (49-VW-02)

- Universal SWC Patch Lead (49-025)

- Single DIN fascia adapter with removable pocket (50-172)

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete stereo upgrade fitting kit to install a Single DIN aftermarket radio in various Volkswagen cars with new (2015 onwards) style quadlock connection.

This head unit fitting kit includes:

- Double Fakra to DIN aerial adapter (Phantom Power) with Bullet connector (21-139K)

- Radio replacement steering wheel adapter interface (49-VW-05)

- Universal SWC Patch Lead (49-025)

- Single DIN facsia adapter with removable pocket (50-172)

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete stereo upgrade fitting kit to install a Single DIN aftermarket radio in various Volkswagen cars with new (2015 onwards) style quadlock connection.

This head unit fitting kit includes:

- Double Fakra to DIN aerial adapter Phantom Power (Part of 29-UC-050-VW5)

- Steering wheel control interface (29-UC-050-VW5)

- Universal patch lead set for steering control interface (29-UCCAB-SET)

- Single DIN fascia adapter with removable pocket (50-172)

DOES NOT RETAIN ANY MULTIFUNCTION DISPLAY INFORMATION. PLEASE USE ONE OF OUR DISPLAY RETENTION FITTING KITS (FK-699-T6-DMX02, FK-699-T6-ILX) TO ACHIEVE THIS

Complete stereo upgrade fitting kit to install a Single DIN aftermarket radio and retain the use of the steering wheel controls in select Mercedes vehicles with factory fitted AUDIO 10/15/20 systems and Quadlock Connection

This fitting kit includes:

- Fakra to DIN antenna adapter cable (21-106)

- Antenna Turn on for Mercedes Audio 10,15 and 20 Radios (21-160-ANT)

- Mercedes Steering wheel control Interface (49-MB-02)

- Universal 49-Series Steering wheel control patch lead (49-025)

- Mercedes Single DIN car audio fascia adapter (50-257)

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD

Complete stereo upgrade fitting kit to install a Single DIN aftermarket radio and retain the use of the steering wheel controls in select Mercedes vehicles with factory fitted AUDIO 10/15/20 systems and Quadlock Connection

This head unit fitting kit includes:

- Fakra to DIN antenna adapter cable (21-106)

- Antenna Turn on for Mercedes Audio 10,15 and 20 Radios (21-160-ANT)

- Steering wheel control interface (29-UC-050-MB2)

- Universal patch lead set for steering control interface (29-UCCAB-SET)

- Mercedes Single DIN car audio fascia adapter (50-257)

Complete stereo upgrade fitting kit to install a Single DIN aftermarket radio and retain the use of the steering wheel controls in select Mercedes Vito (2015 Onwards) vehicles

This head unit fitting kit includes:

- Fakra to DIN antenna adapter cable (21-106)

- Mercedes Steering wheel control Interface (49-MB-04)

- Universal 49-Series Steering wheel control patch lead (49-025)

- Mercedes Single DIN car audio fascia adapter (50-257)

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD

Complete stereo upgrade fitting kit to install a Single DIN aftermarket radio and retain the use of the steering wheel controls in select Mercedes vehicles with factory fitted Audio 5/Sound 5 systems.

This head unit fitting kit includes:
- Fakra to DIN antenna adapter cable (21-106)
- Mercedes Audio 5/Sound 5 Steering wheel control Interface (39-MB-A05)
- Mercedes Single DIN car audio fascia adapter (50-257)

PLEASE NOTE: This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony or Zenec Head-units.

This interface is only suitable for Mercedes vehicles with factory fitted Audio 5/Sound 5 systems

Complete fitting kit to change the original radio in a Mercedes CLK (C209) facelift (2005-2009) vehicle for a Single DIN after market unit.

Kit includes:
-Fascia
-Steering control interface
-Patch lead
-Antenna adapter

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete stereo upgrade kit to install a Single DIN aftermarket radio and retain the use of the steering wheel controls in Mercedes CLK (C209) facelift (2005-2009) car models.

This complete stereo upgrade fitting Kit includes:

Complete fitting kit to change the original radio in a Mercedes CLK (C209) facelift (2005-2009) vehicle for a Double DIN after market unit.

Kit includes:

-Fascia

-Steering control interface

-Patch lead

-Antenna adapter

-Double Din metal cage kit

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in Mercedes CLK (C209) facelift (2005-2009) car models.

This complete stereo upgrade fitting Kit includes:

Complete stereo upgrade kit to install a Single/Double DIN aftermarket radio and retain the use of the steering wheel controls in Mazda MX-5 (2006-2009) car models.

This head unit fitting kit includes:

- Steering control for resistive programmable head-units (20-117-SWC)

- 3.5mm jack resistive programable patch lead (20-3.5-SWC)

- ISO to ISO amplifier integration interface (20-273)

- Mazda MX5 Single/Double DIN fascia (50-262)

PLEASE NOTE: This kit is only suitable for aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in Mazda MX-5 (2006-2009) car models.

This kit comes complete with Kenwood DMX5020DABS Double DIN stereo head-unit with Car Play and Android Auto.

This head unit fitting kit includes:

- Steering control for resistive programmable head-units (20-117-SWC)

- ISO to ISO amplifier integration interface (20-273)

- Mazda MX5 Single/Double DIN fascia (50-262)

- DAB internal windscreen active antenna (70-923)

- Kenwood DMX5020DABS double din stereo head-unit

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in Mazda MX-5 (2006-2009) car models.

This kit comes complete with a Sony XAV-3250DB double din stereo head-unit with wired Car Play and Android Auto.

This head unit fitting kit includes:

- Steering control for resistive programmable head-units (20-117-SWC)

- ISO to ISO amplifier integration interface (20-273)

- Mazda MX5 Single/Double DIN fascia (50-262)

- DAB internal windscreen active antenna (70-923)

- Sony XAV-AX3250DB double din stereo head-unit (HU-S-AX3250DB)

Complete fitting kit to install a Double DIN head unit and retain the original steering wheel controls in various Toyota Vehicles.
This head unit fitting kit includes:

- Steering control interface (29-648)

- Universal patch lead (29-025)

- Toyota Double DIN fascia brackets (50-282)

PLEASE NOTE: There is a very slight gap above the new radio after using this kit

Complete stereo upgrade fitting kit to install a Single or Double DIN aftermarket radio and retain the use of the steering wheel controls in Honda CR-V (2007-2011) car models (WITH ORIGINAL TYPE 2VNO NAVIGATION RADIO AND SUBWOOFER)

This head unit fitting kit includes:

- AM/FM antenna adapter (21-116)

- Steering wheel control interface (29-667-SUB)

- Patch lead (29-025)

- Fascia with brackets and pocket (50-330)

PLEASE NOTE: ONLY SUITABLE FOR CARS WITH ORIGINAL TYPE 2VNO NAVIGATION RADIOS WITH SUBWOOFER, FOR STANDARD ORIGINAL RADIOS PLEASE USE FK-330. FOR 2VNO WITHOUT SUBWOOFER PLEASE USE FK-330-NAV.

Complete stereo upgrade kit to install a Single DIN aftermarket radio and retain the use of the steering wheel controls in a Renault Megane III (2008-2012), without an original OEM navigation system

This complete fitting kit includes:

- Fakra to DIN aerial adapter cable with 12v phantom power (21-123)

- Renault Megane (2008-2012) CANbus steering wheel audio control interface with quadlock (29-UC-050-REN2)

- UNICAN patch lead set (29-UCCAB-SET) 

- Renault Megane III (2008-2012) Single DIN car radio fascia (50-370)

PLEASE NOTE: Suitable for Renault Megane III (2008-2012) with standard OEM radio, NOT for cars with factory fitted navigation systems

Complete stereo upgrade kit to install a Single/Double DIN aftermarket radio and retain the use of the steering wheel controls in Mazda MX-5 (2009-2015) car models with BOSE audio

This head unit fitting kit includes:

- Steering control for resistive programmable head-units (20-117-SWC)

- 3.5mm jack resistive programable patch lead (20-3.5-SWC)

- ISO to ISO amplifier integration interface (20-273)

- Mazda MX5 Single/Double DIN fascia (50-377)

PLEASE NOTE: This kit is only suitable for aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

Complete stereo upgrade kit to install a Single/Double DIN aftermarket radio and retain the use of the steering wheel controls in Mazda MX-5 (2009-2015) car models with BOSE audio

This kit comes complete with Kenwood DMX5020DABS Double DIN stereo head-unit with Car Play and Android Auto.

This head unit fitting kit includes:

- Steering control for resistive programmable head-units (20-117-SWC)

- ISO to ISO amplifier integration interface (20-273)

- Mazda MX5 Single/Double DIN fascia (50-377)

- DAB internal windscreen active antenna (70-923)

- Kenwood DMX5020DABS double din stereo head-unit

Complete stereo upgrade kit to install a Single/Double DIN aftermarket radio and retain the use of the steering wheel controls in Mazda MX-5 (2009-2015) car models with BOSE audio

This kit comes complete with a Sony XAV-3250DB double din stereo head-unit with wired Car Play and Android Auto.

This head unit fitting kit includes:

- Steering control for resistive programmable head-units (20-117-SWC)

- 3.5mm jack resistive programable patch lead (20-3.5-SWC)

- ISO to ISO amplifier integration interface (20-273)

- Mazda MX5 Single/Double DIN fascia (50-377)

- DAB internal windscreen active antenna (70-923)

- Sony XAV-AX3250DB double din stereo head-unit

Complete stereo upgrade kit to install a Single DIN aftermarket radio and retain the use of the steering wheel audio controls in Volvo C30/C70/S40 and V50 car models (WITH STANDARD NON-AMPLIFIED SOUND SYSTEMS)

This kit also retains phone button controls, warning chimes/parking sensor audio and provides outputs for Park Brake, Reverse Gear and Speed Pulse.

This kit is the equivalent of Connects2 part: CTKVL11

PLEASE NOTE: ONLY SUITABLE FOR MODELS WITH STANDARD NON-AMPLIFED SOUNDS SYSTEMS, FOR AMPLIFIED SYSTEMS PLEASE USE FK-550-A

Does not retain original display showing any car settings, temperature and fan speed on climate system.

Complete stereo upgrade kit to install a Single DIN aftermarket radio and retain the use of the steering wheel audio controls in Volvo C30/C70/S40 and V50 car models (WITH AMPLIFIED SOUND SYSTEMS)

This kit also retains phone button controls, warning chimes/parking sensor audio and provides outputs for Park Brake, Reverse Gear and Speed Pulse.

This kit is the equivalent of Connects2 part: CTKVL05

PLEASE NOTE: ONLY SUITABLE FOR MODELS WITH AMPLIFIED SOUND SYSTEMS, FOR NON-AMPLIFIED SYSTEMS PLEASE USE FK-550

This kit will power all the speakers apart from centre channel speakers (usually found on Dynaudio Sound Systems)

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in a Porsche Macan 95B (2014-2016) car model (NON-AMPLIFIED MODELS) with a PCM 3.1 system. 

This kit also retains the OEM factory fitted Porsche OPS parking sensor graphics, as well as providing output feeds for Park Brake, Speed Pulse, Reverse Gear and Mute. This fitting kit will also retain the factory fitted reverse camera (if the vehicle is equipped with one)

This kit is the equivalent of Connects2 part: CTKPO14

PLEASE NOTE: ONLY SUITABLE FOR MODELS WITH STANDARD NON-AMPLIFED SOUNDS SYSTEMS, FOR AMPLIFIED BOSE SYSTEMS PLEASE USE FK-555-4

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in a Porsche Macan 95B (2014-2016) car model (BOSE MOST AMPLIFIED SYSTEMS) with a PCM 3.1 system. 

This kit also retains the OEM factory fitted Porsche OPS parking sensor graphics, as well maintaining the factory fitted BOSE MOST amplified network on the vehicle.

The interface also provides output feeds for Park Brake, Speed Pulse, Reverse Gear and Mute. This fitting kit will also retain the factory fitted reverse camera (if the vehicle is equipped with one)

PLEASE NOTE: ONLY SUITABLE FOR MODELS WITH BOSE MOST AMPLIFIED SOUNDS SYSTEMS

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in BMW 3-Series (F30, F31, F34) and 4-Series (F32, F33, F36) car models (WITH NON-AMPLIFIED SYSTEMS)

This kit also retains the OEM factory climate controls, as well as the vehicle settings via the top display. This fitting kit will also retain the factory warning chimes/ parking sensor audio (Via the integrated speaker)

This kit is the equivalent of Connects2 part: CTKBM30

PLEASE NOTE: ONLY SUITABLE FOR MODELS WITH STANDARD NON-AMPLIFED SOUNDS SYSTEMS, FOR AMPLIFIED HARMAN KARDON SOUND SYSTEMS PLEASE USE FK-556A

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in BMW 3-Series (F30, F31, F34) and 4-Series (F32, F33, F36) car models (WITH MOST-AMPLIFIED SYSTEMS)

This kit also retains the OEM factory climate controls, as well as the vehicle settings via the top display. This fitting kit will also retain the factory warning chimes/ parking sensor audio (Via the integrated speaker)

PLEASE NOTE: ONLY SUITABLE FOR MODELS WITH THE MOST AMPLIFIED SOUNDS SYSTEMS, FOR NON-AMPLIFIED SOUND SYSTEMS PLEASE USE FK-556

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in BMW X5 (E70) (2007-2013) and X6 (E71) (2008-2014) car models (WITH NON-AMPLIFIED SYSTEMS)

This kit also retains the OEM factory climate controls, as well as providing outputs for speed pulse, park brake and reverse gear. This fitting kit will also retain the factory warning chimes/ parking sensor audio (Via the integrated speaker)

This kit is the equivalent of Connects2 part: CTKBM33

PLEASE NOTE: ONLY SUITABLE FOR MODELS WITH STANDARD NON-AMPLIFED SOUNDS SYSTEMS, FOR AMPLIFIED SOUND SYSTEMS PLEASE USE FK-557-A

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in BMW X5 (E70) (2007-2013) and X6 (E71) (2008-2014) car models (WITH MOST-AMPLIFIED SYSTEMS)

This kit also retains the OEM factory climate controls, as well as providing outputs for speed pulse, park brake and reverse gear. This fitting kit will also retain the factory warning chimes/ parking sensor audio (Via the integrated speaker)

This kit will retain the OEM MOST fiber optic network usually found in amplified BMW sound systems such as Harman Kardon.

PLEASE NOTE: ONLY SUITABLE FOR MODELS WITH MOST-AMPLIFED SOUNDS SYSTEMS, FOR NON-AMPLIFIED SOUND SYSTEMS PLEASE USE FK-557